|
178 | Devops | Bug Report | Very Low | Low | New installer overwrites pacman mirrors | Closed | |
Task Description
I tried to install archlinux32 using the archinstall installer, which is shipped with the installation medium. Installation is working fine until pacstrap, where it will crash because all mirrors will return 404. I checked my connection and it is working and dns also works. When I viewed the /etc/pacman.d/mirrorlist file, I saw that the script wrote the default archlinux mirrors for the region specified in the installer to the file and the don’t contain the 32bit packages.
|
|
135 | Packages | Bug Report | Medium | Low | namcap fails on libxkbcommon | Closed | |
Task Description
Checking PKGBUILD
Traceback (most recent call last):
File "/usr/lib/python3.9/runpy.py", line 197, in _run_module_as_main
return _run_code(code, main_globals, None,
File "/usr/lib/python3.9/runpy.py", line 87, in _run_code
exec(code, run_globals)
File "/usr/lib/python3.9/site-packages/namcap.py", line 247, in <module>
process_pkgbuild(package, active_modules)
File "/usr/lib/python3.9/site-packages/namcap.py", line 153, in process_pkgbuild
name = "PKGBUILD (" + pkginfo["name"] + ")"
File "/usr/lib/python3.9/site-packages/Namcap/package.py", line 128, in __getitem__
return self._data[self.canonical_varname(key)]
KeyError: 'name'
==> Running checkpkg
error: no targets specified (use -h for help)
==> WARNING: Skipped checkpkg due to missing repo packages
|
|
124 | Packages | Bug Report | Medium | Low | mutter and gnome-shell are in confllict | Closed | |
Task Description
:: installing mutter (3.38.1-1.1) breaks dependency ‘libmutter-6.so=0-32’ required by gnome-shell
|
|
314 | Packages | Bug Report | Very Low | Low | Mumble requires a outdated protobuf | Unconfirmed | |
Task Description
libprotobuf=28 is a mumble (package) dependency, but protobuf package has libprotobuf=32.
I needed to downgrade to protobuf-3.17.3-1.3-pentium4.pkg.tar.zst (from the archive) to install mumble.
|
|
121 | Packages | Bug Report | Very Low | High | Multiple packages need rebuild after libicu upgrade | Closed | |
Task Description
Over in FS#119 , @abaumann mentioned that the libicu upgrade from 67 to 68 was part of what broke gdb. I missed the libicu upgrade when looking at gdb, but now that that one is resolved, I noticed a number of other packages that still link against the old and now nonexistant /usr/lib/libicu*.so.67 files. On my particular system, the following packages are installed, link to icu 67, and need rebuilt as well:
* harfbuzz-icu (2.7.0-1.0) * mongo-c-driver (1.17.3-1.0) * postfix (3.5.6-2.0) * postgresql (12.4-1.0) * postgresql-old-upgrade (12.5-1.0) * samba (4.12.3-1.2) * smbclient (4.12.3-1.2) * syslog-ng (3.28.1-3.0) * texlive-bin (2020.54586-4.0) * xfsprogs (5.8.0-1.0)
… but I’m sure you have a way of determining all the affected packages?
As a workaround, in case others have the same problem, I manually extracted the old versioned .so files from the previous package to get things working again:
``` tar -C / -xf /var/cache/pacman/pkg/icu-67.1-1.0-i686.pkg.tar.zst –wildcards ‘usr/lib/lib*.so.*’ ```
- I’ll just have to remember to clean them up again later.
|
|
190 | Packages: Stable | Bug Report | Very Low | Critical | mpv-1:0.33.1-2.0-pentium4 aborts immediately | Closed | |
Task Description
Here’s 1:0.33.1-1.0-pentium4:
$ pacman -Qs mpv
local/mpv 1:0.33.1-1.0
a free, open source, and cross-platform media player
$ mpv --version
mpv 0.33.1-dirty Copyright © 2000-2020 mpv/MPlayer/mplayer2 projects
built on UNKNOWN
FFmpeg library versions:
libavutil 56.51.100
libavcodec 58.91.100
libavformat 58.45.100
libswscale 5.7.100
libavfilter 7.85.100
libswresample 3.7.100
FFmpeg version: n4.3.2
Here’s 1:0.33.1-2.0-pentium4:
$ pacman -Qs mpv
local/mpv 1:0.33.1-2.0
a free, open source, and cross-platform media player
$ mpv --msg-level=all=trace --version
libavutil: 56.70.100 -> 56.51.100
Aborted (core dumped)
Looks to me like it might be a library version thing (I’m up-to-date according to
pacman -Syu
), but I’ve only been running Arch32 for 24 hours so I’m not sure where further to dig.
|
|
191 | Packages | Bug Report | Very Low | Critical | mpv links against libsrt.so.1 which does not exist | Closed | |
Task Description
$ pacman -Qs mpv
local/mpv 1:0.33.1-1.0
a free, open source, and cross-platform media player
$ pacman -Qs srt
local/srt 1.4.3-1.0
Secure Reliable Transport library
$ pacman -Fl srt | grep libsrt
srt usr/lib/libsrt.so
srt usr/lib/libsrt.so.1.4
srt usr/lib/libsrt.so.1.4.3
$ mpv
mpv: error while loading shared libraries: libsrt.so.1: cannot open shared object file: No such file or directory
$ ldd /usr/bin/mpv | grep srt
libsrt.so.1 => not found
$ sudo ln -s /usr/lib/libsrt.so.1.4.3 /usr/lib/libsrt.so.1
$ mpv --version
mpv 0.33.1-dirty Copyright © 2000-2020 mpv/MPlayer/mplayer2 projects
built on UNKNOWN
FFmpeg library versions:
libavutil 56.51.100
libavcodec 58.91.100
libavformat 58.45.100
libswscale 5.7.100
libavfilter 7.85.100
libswresample 3.7.100
FFmpeg version: n4.3.2
$ ldd /usr/bin/mpv | grep srt
libsrt.so.1 => /usr/lib/libsrt.so.1 (0xb2a54000)
Running ldconfig does not create the missing symlink.
|
|
241 | Packages | Bug Report | Very Low | Low | mpd probably needs to be rebuilt against pipewire | Closed | |
Task Description
Hi,
If I run mpd, it fails to run due to a missing PW_LOG_TOPIC_DEFAULT symbol: > $ mpd > mpd: symbol lookup error: mpd: undefined symbol: PW_LOG_TOPIC_DEFAULT
While I run Parabola, both mpd and pipewire comes from the i686 repository of Arch Linux 32: > extra/mpd 0.23.5-1.2 [installed] > Flexible, powerful, server-side application for playing music > extra/pipewire 1:0.3.36-1.0 [installed] > Low-latency audio/video router and processor
If I look on a x86_64 Parabola installation instead, PW_LOG_TOPIC_DEFAULT can be found in libpipewire: > $ readelf -s /usr/lib/libpipewire-0.3.so.0 | grep PW_LOG_ > 383: 00000000000d7128 8 OBJECT GLOBAL DEFAULT 21 > PW_LOG_TOPIC_DEFAULT
But that command returns nothing on Parabola i686.
Denis.
|
|
100 | Packages: Stable | Bug Report | Very Low | Low | mldonkey crashes | Unconfirmed | |
Task Description
All versions of mldonkey crash in arch32 updated. (segmentation fault and core dumped)
|
|
356 | Packages | Bug Report | Medium | Low | mkinitcpio core dump | Closed | |
Task Description
double free or corruption (out)
/usr/bin/mkinitcpio: line 557: 2387 Aborted (core dumped) MKINITCPIO_PROCESS_PRESET="$preset_name" "$0" "${preset_cmd[@]}"
error: command failed to execute correctly
Maybe also the age of the machine, the CMOS, the RAM, the moon, the universe could be at fault here..
|
|
97 | Packages: Stable | Bug Report | Very Low | Low | mesa-vdpau /usr/lib/dri/r300_dri.so links to wrong libL ... | Closed | |
Task Description
grep LLVM /var/log/Xorg.0.log
[ 29.423] (EE) AIGLX error: dlopen of /usr/lib/dri/r300_dri.so failed (libLLVM-8.so: cannot open shared object file: No such file or directory)
[ 29.424] (EE) AIGLX error: dlopen of /usr/lib/dri/swrast_dri.so failed (libLLVM-8.so: cannot open shared object file: No such file or directory)
ldd /usr/lib/dri/r300_dri.so
linux-gate.so.1 (0xb7f26000)
libdrm.so.2 => /usr/lib/libdrm.so.2 (0xb6836000)
libLLVM-8.so => not found
libexpat.so.1 => /usr/lib/libexpat.so.1 (0xb680a000)
libdl.so.2 => /usr/lib/libdl.so.2 (0xb6804000)
libsensors.so.5 => /usr/lib/libsensors.so.5 (0xb67f3000)
libdrm_radeon.so.1 => /usr/lib/libdrm_radeon.so.1 (0xb67e4000)
libelf.so.1 => /usr/lib/libelf.so.1 (0xb67c6000)
libdrm_amdgpu.so.1 => /usr/lib/libdrm_amdgpu.so.1 (0xb67b9000)
libdrm_nouveau.so.2 => /usr/lib/libdrm_nouveau.so.2 (0xb67ae000)
libglapi.so.0 => /usr/lib/libglapi.so.0 (0xb678d000)
libz.so.1 => /usr/lib/libz.so.1 (0xb6773000)
libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xb6595000)
libm.so.6 => /usr/lib/libm.so.6 (0xb64c3000)
libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0xb64a6000)
libpthread.so.0 => /usr/lib/libpthread.so.0 (0xb6483000)
libc.so.6 => /usr/lib/libc.so.6 (0xb62d3000)
/usr/lib/ld-linux.so.2 (0xb7f27000)
ls /usr/lib/libLLVM*
/usr/lib/libLLVM-9.0.0.so /usr/lib/libLLVM-9.so /usr/lib/libLLVM.so
|
|
347 | Packages | Bug Report | Very Low | Low | Meld will not start - error message -> Meld requires Gt... | Unconfirmed | |
Task Description
[keith@Arch32 ~]$ meld Meld requires Gtk+ 3.20 or higher. [keith@Arch32 ~]$ pacman -Qi meld Name : meld Version : 3.22.0-2.0 Description : Compare files, directories and working copies Architecture : any URL : https://meldmerge.org/ Licenses : GPL Groups : None Provides : None Depends On : python-gobject python-cairo gtksourceview4 gsettings-desktop-schemas dconf Optional Deps : None Required By : None Optional For : None Conflicts With : None Replaces : None Installed Size : 5.06 MiB Packager : TasosSah arch32@tasossah.com Build Date : Sat 19 Aug 2023 23:25:57 BST Install Date : Sat 26 Aug 2023 07:08:59 BST Install Reason : Explicitly installed Install Script : No Validated By : Signature
[keith@Arch32 ~]$ pacman -Qi gtksourceview4 Name : gtksourceview4 Version : 4.8.4-1.0 Description : A text widget adding syntax highlighting and more to GNOME Architecture : pentium4 URL : https://wiki.gnome.org/Projects/GtkSourceView Licenses : GPL Groups : None Provides : libgtksourceview-4.so=0-32 Depends On : gtk3 libxml2 Optional Deps : None Required By : meld xed Optional For : None Conflicts With : None Replaces : None Installed Size : 7.44 MiB Packager : Andreas Baumann mail@andreasbaumann.cc Build Date : Mon 07 Nov 2022 11:50:56 GMT Install Date : Mon 28 Nov 2022 11:49:04 GMT Install Reason : Installed as a dependency for another package Install Script : No Validated By : Signature
[keith@Arch32 ~]$ pacman -Qi gtk3 Name : gtk3 Version : 1:3.24.37-1.0 Description : GObject-based multi-platform GUI toolkit Architecture : pentium4 URL : https://www.gtk.org/ Licenses : LGPL Groups : None Provides : gtk3-print-backends libgailutil-3.so=0-32 libgdk-3.so=0-32 libgtk-3.so=0-32 Depends On : adwaita-icon-theme atk cairo cantarell-fonts dconf desktop-file-utils fontconfig fribidi gdk-pixbuf2 glib2 harfbuzz iso-codes
libcloudproviders libcolord libcups libegl libepoxy libgl librsvg libxcomposite libx11 libxcursor libxdamage libxext libxfixes
libxi libxinerama libxkbcommon libxrandr libxrender pango shared-mime-info wayland at-spi2-core tracker3 gtk-update-icon-cache
Optional Deps : evince: Default print preview command Required By : bleachbit engrampa firefox gcr gpicview gspell gtkmm3 gtksourceview4 libdbusmenu-gtk3 libgnomekbd libindicator-gtk3 libnma
libpeas lightdm-gtk-greeter lxmusic vte3 xdg-user-dirs-gtk
Optional For : avahi gvfs libcanberra libdecor libreoffice-still Conflicts With : gtk3-print-backends Replaces : gtk3-print-backends⇐3.22.26-1 Installed Size : 49.88 MiB Packager : Andreas Baumann mail@andreasbaumann.cc Build Date : Sun 16 Apr 2023 11:18:09 BST Install Date : Tue 25 Apr 2023 13:06:04 BST Install Reason : Installed as a dependency for another package Install Script : Yes Validated By : Signature
[keith@Arch32 ~]$
|
|
353 | Packages | Bug Report | Very Low | Low | mc: is broken | Closed | |
Task Description
$ mc
mc: symbol lookup error: mc: undefined symbol: g_string_new_take
$ mcedit
mcedit: symbol lookup error: mcedit: undefined symbol: g_string_new_take
|
|
150 | Packages | Bug Report | Medium | Low | MATE doesn't start up | Closed | |
Task Description
no task description |
|
27 | Packages | Bug Report | Medium | Low | man breaks on gdbm sobump | Closed | |
Task Description
Attached to Project: Archlinux32 Opened by Andreas Baumann - 02.02.2018 Last edited by Andreas Baumann - 03.02.2018
FS#27 - man breaks on gdbm sobump
man man: error while loading shared libraries: libgdbm.so.4: cannot open shared object file: No such file or directory
either you must link against libgdbm_compat.so.4 or against libgdbm.5 Closed by Andreas Baumann 03.02.2018 07:47 Reason for closing: Fixed Additional comments about closing:
fixed in man-db-2.7.6.1-3.1, installing that package from testing as temporary is the better solution than adding a symlink you make forget to delete..
Comments (4)
Related Tasks (0/0)
Admin Andreas Baumann commented on 02.02.2018 17:50
temporary workaround: ln -fs libgdbm_compat.so.4 /usr/lib/libgdbm.so.4 Admin Andreas Baumann commented on 02.02.2018 17:53
weird: Archlinux has:
/usr/bin/man is owned by man-db 2.7.6.1-3 gdbm 1.14.1-1
Archlinux 32 has:
man-db 2.7.6.1-3.0 gdbm 1.14.1-1.0
This seems to be pretty much the same version. Admin Erich Eckner commented on 02.02.2018 18:15
it’s amazing what packages we managed to break I scheduled man-db for a rebuild Admin Andreas Baumann commented on 02.02.2018 20:38
man-db is rebuilding on my slave. *fingers crossed*
Google Cache
|
|
141 | Devops | Bug Report | Medium | Low | make iso build more reliably | New | |
Task Description
Currently, the iso build are several bash scripts on several machines requiring to move stuff via sshfs and alike.
This should become more stable - ideally some single script/package/systemd-unit with proper error reporting (email or irc come to my mind)
|
|
126 | Packages | Bug Report | Medium | Low | lua hooks break in TeX on i686 | New | |
Task Description
PANIC: unprotected error in call to Lua API (CPU with SSE2 required)
PANIC: unprotected error in call to Lua API (CPU with SSE2 required)
fmtutil [ERROR]: running `luajittex -ini -jobname=luajittex -progname=luajittex luatex.ini </dev/null' return status: 1
fmtutil [ERROR]: cannot copy log luajittex.log to: /var/lib/texmf/web2c/luajittex
fmtutil [ERROR]: returning error due to option --strict
fmtutil [ERROR]: running `luajithbtex -ini -jobname=luajithbtex -progname=luajithbtex luatex.ini </dev/null' return status: 1
fmtutil [ERROR]: cannot copy log luajithbtex.log to: /var/lib/texmf/web2c/luajithbtex
fmtutil [ERROR]: returning error due to option --strict
error: command failed to execute correctly
|
|
276 | Packages | Bug Report | Medium | Low | LTO optimization needs to much memory | New | |
Task Description
7234 build 20 0 1353768 1.2g 18020 R 96.1 64.0 4:27.92 lto1-wpa
xf86-video-intel (this is not exactly a huge package, but maybe the included X libraries are?)
We lost it on i486 already (because it doesn’t work with newer gcc, or at least I didn’t investigate how to make it work).
I suggest to get rid of LTO completely. The problem is patching all the options=(lto), –enable-lto/ –without-lto -D b_lto=tru etc. which easily creates a maintainance nightmare.
Maybe an easier way to go is to have them similar to the ‘lib32-’ stripping in the main build scripts or hooks? Downstream this might create trouble tough, as the build systems are different..
Upstream has options=(lto) support, but it doesn’t seen helping here as packages need local flags everywhere..
|
|
137 | Packages | Bug Report | Medium | Low | llvm rebuild fails (aka sphinx requires a python module ... | Closed | |
Task Description
Configuration error:
There is a programmable error in your configuration file:
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/sphinx/config.py", line 326, in eval_config_file
execfile_(filename, namespace)
File "/usr/lib/python3.9/site-packages/sphinx/util/pycompat.py", line 88, in execfile_
exec(code, _globals)
File "/build/llvm/src/llvm-11.0.1.src/docs/conf.py", line 40, in <module>
import recommonmark
ModuleNotFoundError: No module named 'recommonmark'
|
|
108 | Packages: Staging | Bug Report | Very Low | High | lldb fails to run any binary (error: failed to launch o... | Unconfirmed | |
Task Description
Very easy to reproduce. lldb version 10.0.0, just try to run any binary.
[aeden@arch32 bin]$ lldb $(which date) (lldb) target create “/usr/bin/date” Current executable set to ‘/usr/bin/date’ (i386). (lldb) run error: failed to launch or debug process (lldb)
|
|
238 | Packages | Bug Report | Very Low | Low | Linux-zen kernel 5.16.8.arch1-1.0 made with gcc 11.1 an ... | Closed | |
Task Description
Linux and Linux-zen kernel 5.16.8.arch1-1.0 made with gcc 11.1 and cannot build dkms modules with gcc 11.2
remake linux and linux-zen kernel with gcc version 11.2
|
|
187 | Devops | Bug Report | Medium | Low | linux-pae is for x86_64? | Closed | |
Task Description
This seems to be a problem of either update-archlinux32-package in devops or of the (commented) code path in the PKGBUILD which gets executed by this script.
|
|
60 | Packages: Build-list | Bug Report | Medium | Low | lightdm gtk greeter fails | Closed | |
Task Description
Attached to Project: Archlinux32 Opened by Andreas Baumann - 10.01.2019 Last edited by Andreas Baumann - 20.01.2019
FS#60 - lightdm gtk greeter fails
Jan 10 12:55:01 arch32-staging systemd-coredump[894]: Process 892 (lightdm-gtk-gre) of user 620 dumped core.
Stack trace of thread 892:
#0 0x00000000b712bb25 n/a (libglib-2.0.so.0)
#1 0x00000000b7120230 g_log_default_handler (libglib-2.0.so.0)
#2 0x00000000b712bd7d g_logv (libglib-2.0.so.0)
#3 0x00000000b712bf55 g_log (libglib-2.0.so.0)
#4 0x00000000b711267a g_thread_new (libglib-2.0.so.0)
#5 0x00000000b7132a1e n/a (libglib-2.0.so.0)
#6 0x00000000b7132a7a n/a (libglib-2.0.so.0)
#7 0x00000000b70e78d7 g_unix_signal_source_new (libglib-2.0.so.0)
#8 0x00000000b70ea3ef g_unix_signal_add_full (libglib-2.0.so.0)
#9 0x00000000b70ea463 g_unix_signal_add (libglib-2.0.so.0)
#10 0x00000000004dc145 main (lightdm-gtk-greeter)
#11 0x00000000b6c87a49 __libc_start_main (libc.so.6)
#12 0x00000000004de7f5 _start (lightdm-gtk-greeter)
Closed by Andreas Baumann 20.01.2019 16:04 Reason for closing: Fixed Additional comments about closing:
hotfixed in lightdm-1:1.28.0-1.3
Comments (12)
Related Tasks (0/0)
Admin Andreas Baumann commented on 19.01.2019 07:49
So, this happens when registering a signal handler: g_unix_signal_add.
Usually this points into the direction of ABI mismatches.. Admin Andreas Baumann commented on 19.01.2019 08:07
[+0.83s] DEBUG: Session pid=3468: Running command /usr/bin/lightdm-gtk-greeter [+0.83s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm [+0.83s] DEBUG: Session pid=3468: Logging to /var/log/lightdm/seat0-greeter.log [+1.45s] DEBUG: Seat seat0: Stopping; failed to start a greeter
the logfile is empty.
So, the question is, why doesn’t the greeter start and segfault. Admin Andreas Baumann commented on 19.01.2019 09:19
rebuilt both lightdm-gtk-greeter and glib2 with debugging information (options=debug in PKGBUILD).
Now the stacktrace looks like:
#0 0xb7178b25 in _g_log_abort (breakpoint=1) at ../glib/glib/gmessages.c:554 554 G_BREAKPOINT (); (gdb) bt #0 0xb7178b25 in _g_log_abort (breakpoint=1) at ../glib/glib/gmessages.c:554 #1 0xb716d230 in g_log_default_handler
(log_domain=0xb71b40d0 "GLib", log_level=6, message=0x78ee60 "creating thread 'gmain': Error creating thread: Resource temporarily unavailable", unused_data=0x0) at ../glib/glib/gmessages.c:3111
#2 0xb7178d7d in g_logv
(log_domain=0xb71b40d0 "GLib", log_level=G_LOG_LEVEL_ERROR, format=0xb7207a67 "creating thread '%s': %s", args=0xbf85e91c "\262\320 \267") at ../glib/glib/gmessages.c:1350
#3 0xb7178f55 in g_log
(log_domain=0xb71b40d0 "GLib", log_level=G_LOG_LEVEL_ERROR, format=0xb7207a67 "creating thread '%s': %s") at ../glib/glib/gmessages.c:1413
#4 0xb715f67a in g_thread_new (name=0xb720d0b2 “gmain”, func=0xb7180b70 , data=0×0)
at ../glib/glib/gthread.c:830
#5 0xb717fa1e in g_get_worker_context () at ../glib/glib/gmain.c:5888 #6 0xb717fa7a in ref_unix_signal_handler_unlocked (signum=15, signum
at ../glib/glib/gmain.c:5224
#7 0xb71348d7 in _g_main_create_unix_signal_watch (signum=15) at ../glib/glib/gmain.c:5332 #8 0xb71348d7 in g_unix_signal_source_new (signum=15, signum
at ../glib/glib/glib-unix.c:222
#9 0xb71373ef in g_unix_signal_add_full
(priority=0, signum=15, handler=0x495f90 , user_data=0x1, notify=0x0)
at ../glib/glib/glib-unix.c:252
#10 0xb7137463 in g_unix_signal_add (signum=15, handler=0x495f90 , user_data=0×1) –Type for more, q to quit, c to continue without paging–
at ../glib/glib/glib-unix.c:283
#11 0×00490145 in main (argc=, argv at lightdm-gtk-greeter.c:2768
Admin Andreas Baumann commented on 19.01.2019 09:44
creating thread ‘gmain’: Error creating thread: Resource temporarily unavailable
This is the interesting one. Why should creating a thread run out of resources? And which resources? Admin Andreas Baumann commented on 19.01.2019 09:47
This is not by any chance an unhandled EAGAIN? Admin Andreas Baumann commented on 19.01.2019 10:04
[pid 6607] execve(”/usr/bin/core_perl/plymouth”, [”plymouth”, “–ping”], 0xbfa9086c /* 22 vars */) = -1 ENOENT (No such file or directory)
this seems a collateral damage (aka hard-coded call to the bootup manager plymouth), not every Linux distribution has a plymouth, so I hope, this is actually optional.. The -ping indicates, that plymouth is started with ping, to see whether it is around. It doesn’t seem to have something to do with our problem though..
There is a strace entry showing the greeter gets started:
[pid 6616] execve(”/usr/bin/lightdm-gtk-greeter”, [”/usr/bin/lightdm-gtk-greeter”], 0xf61510 /* 15 vars */) = 0
later the sighandler tries to open a new thread:
825 GThread *thread; 826 827 thread = g_thread_new_internal (name, g_thread_proxy, func, data, 0, &error); 828 829 if G_UNLIKELY (thread == NULL) 830 g_error (”creating thread ‘%s’: %s”, name ? name : ““, error->message); 831 832 return thread;
So, if it runs out of resources here (due to a systemd limit, rlimit thing), this would explain the startup issues..
There is also a suspicious:
[pid 6616] mmap2(NULL, 8392704, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = -1 EAGAIN (Resource temporarily unavailable)
So, I check the rlimit settings used by systemd for login session.. Admin Andreas Baumann commented on 20.01.2019 09:21
Sounds related:
https://github.com/abrt/faf/issues/212 Admin Andreas Baumann commented on 20.01.2019 10:37
mmh. why does lightdm-gtk-greeter work on 64-bit Archlinux? Admin Andreas Baumann commented on 20.01.2019 10:55
aha. the mmap works there. Admin Andreas Baumann commented on 20.01.2019 13:54
lightdm-gtk-greeter.c
mlockall (MCL_CURRENT | MCL_FUTURE);
commenting that out lets the mmap2 succeed.
As we deal with passwords, just disabling the locking is maybe not the best idea.
Incrementing the systemd limit in lightdm.conf LimitMEMLOCK=2684354560 didn’t help at all. Admin Andreas Baumann commented on 20.01.2019 13:58
Locking the whole greeter with all GTK inside is maybe also not the wisest idea.. Admin Andreas Baumann commented on 20.01.2019 14:03
LimitMEMLOCK=infinity in /lib/systemd/system/lightdm.service seemed so help.
Google Cache
|
|
131 | Packages | Bug Report | Medium | Low | libseccomp doesn't build in python bindings | Closed | |
Task Description
no task description |
|
31 | Packages | Bug Report | Medium | Low | librsvg fails with invalid opcode on 2.42.1 and newer | Closed | |
Task Description
Attached to Project: Archlinux32 Opened by Swift Geek - 16.03.2018 Last edited by Andreas Baumann - 26.03.2018
FS#31 - librsvg fails with invalid opcode on 2.42.1 and newer
traps: gtk3-demo[365] trap invalid opcode ip:aedd3e15 sp:bffc64c0 error:0 in librsvg-2.so.2.42.3[aed27000+11a000]
Downgrading to 2.40.19 seems to help. https://archive.archlinux32.org/repos/2017/11/01/extra/os/i686/librsvg-2:2.40.19-1-i686.pkg.tar.xz
This could be related to machine not having SSE2 (Pentium III-M Tualin)
Related bbs thread: https://bbs.archlinux32.org/viewtopic.php?id=1369 Closed by Andreas Baumann 26.03.2018 15:02 Reason for closing: Fixed
Comments (1)
Related Tasks (0/0)
Paul Gover commented on 26.03.2018 11:03
For me, librsvg-2:2.42.3-1.2 fixes the problem
Google Cache
|
|
77 | Packages: Build-list | Bug Report | Medium | Low | librsvg doesn't rebuild | Closed | |
Task Description
Attached to Project: Archlinux32 Opened by Andreas Baumann - 30.05.2019
FS#77 - librsvg doesn’t rebuild
-> /build/librsvg/src/librsvg/target/release/build/typenum-ff577e94a786118f/out/consts.rs:2113:5
| 2111 | pub type P1024 = PInt; pub type N1024 = NInt;
| ----------------------------- previous definition of the type `P1024` here
2112 | pub type U1024 = UInt, B0>, B0>, B0>, B0>, B0>, B0>, B0>, B0>, B0>, B0>; 2113 | pub type P1024 = PInt; pub type N1024 = NInt;
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ `P1024` redefined here
|
= note: `P1024` must be defined only once in the type namespace of this module
error[E0428]: the name `N1024` is defined multiple times
-> /build/librsvg/src/librsvg/target/release/build/typenum-ff577e94a786118f/out/consts.rs:2113:35
| 2111 | pub type P1024 = PInt; pub type N1024 = NInt;
| ----------------------------- previous definition of the type `N1024` here
2112 | pub type U1024 = UInt, B0>, B0>, B0>, B0>, B0>, B0>, B0>, B0>, B0>, B0>; 2113 | pub type P1024 = PInt; pub type N1024 = NInt;
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ `N1024` redefined here
|
= note: `N1024` must be defined only once in the type namespace of this module
error: aborting due to 3 previous errors
For more information about this error, try `rustc –explain E0428`. error: Could not compile `typenum`.
Caused by:
process didn't exit successfully: `rustc --crate-name typenum /build/.cargo/registry/src/github.com-1ecc6299db9ec823/typenum-1.10.0/src/lib.rs --color never --crate-type lib --emit=dep-info,link -C opt-level=3 -C debuginfo=2 -C metadata=045a2ce7f5cfaab5 -C extra-filename=-045a2ce7f5cfaab5 --out-dir /build/librsvg/src/librsvg/target/release/deps -L dependency=/build/librsvg/src/librsvg/target/release/deps --cap-lints allow -C target-cpu=pentium3 -C target-feature=-sse2` (exit code: 1)
warning: build failed, waiting for other jobs to finish… error: build failed make[2]: * [Makefile:1934: /build/librsvg/src/librsvg/target/release/librsvg_internals.a] Error 101 make[2]: Leaving directory ‘/build/librsvg/src/librsvg’
make[1]: * [Makefile:1438: all-recursive] Error 1 make[1]: Leaving directory ‘/build/librsvg/src/librsvg’ make: *** [Makefile:931: all] Error 2
The same error with typenum as when bootstrapping rust in stage 2.
librsvg is very important as it blocks tons of other stuff (so why again was it written in Rust?!)
I might have seen a Debian patch for it, but Debian goes a “complete Rust micro-packaging” way, not sure whether we can apply it here?
Comments (1)
Related Tasks (0/0)
Levi commented on 30.05.2019 18:26
Since it looks to me like it’s redefining P1024 and N1024 the same, can’t you just eliminate one of these definitions. Sure, it makes a patch you’d have to maintain henceforth until they fix this upstream, and I don’t understand what kind of preprocessing is ending up with this particular duplication, but deleting a line is about the simplest patch you could maintain.
Google Cache
|
|
23 | Packages: Build-list | Bug Report | Medium | Low | libretro* packages failing, seem unsupported for 32-bit ... | Closed | |
Task Description
Attached to Project: Archlinux32 Opened by Andreas Baumann - 04.01.2018 Last edited by Erich Eckner - 26.01.2018
FS#23 - libretro* packages failing, seem unsupported for 32-bit Intel/Linux
This affects the following packages: - libretro-citra (unsuported architecture in dynarmic submodule) - libretro-parallel-n64: tons of assembly errors - libretro-ppsspp: linking issues with ffmpeg - libretro-mupen64plus: direct GOT relocation R_386_GOT32X against _ZN9PluginAPI3getEv PluginAPI::get()
blacklisting all. Closed by Erich Eckner 26.01.2018 17:08 Reason for closing: Won’t fix Additional comments about closing:
blacklisted
Comments (0)
Google Cache
|
|
328 | Packages | Bug Report | Very Low | Medium | libreoffice-fresh on i686 is newer then pentium4 | Closed | |
Task Description
i686:- libreoffice-fresh 7.3.4-2.1 pentium4:- libreoffice-fresh 7.3.2-1.0
|
|
76 | Packages: Stable | Bug Report | Medium | Low | libreoffice-fresh needs to be rebuild against icu | Closed | |
Task Description
Attached to Project: Archlinux32 Opened by Raphael Scholer - 25.05.2019
FS#76 - libreoffice-fresh needs to be rebuild against icu
Comments (1)
Related Tasks (0/0)
Levi commented on 25.05.2019 18:22
This bug is already captured 90% by https://bugs.archlinux32.org/index.php?do=details&task_id=72 (see my comment underneath it), although to be fair I noted it against libreoffice-stable since that’s what I use.
Google Cache
|
|
195 | Packages: Testing | Bug Report | Very Low | Low | libreoffice-fresh and libreoffice-still will not start | Closed | |
Task Description
There is a problem with libreoffice-fresh and libreoffice-still which appears to be caused by the last update to boost and boost-libs which are now at version 1.76.0-1.3
~]$ libreoffice
javaldx: Could not find a Java Runtime Environment!
Warning: failed to read path from javaldx
/usr/lib/libreoffice/program/soffice.bin: error while loading shared libraries: libboost_locale.so.1.75.0: cannot open shared object file: No such file or directory
|
|
56 | Packages | Bug Report | Medium | Low | libreoffice-fresh 6.1.3-1.0 in [extra] is not build aga ... | Closed | |
Task Description
Attached to Project: Archlinux32 Opened by Raphael Scholer - 11.11.2018 Last edited by Erich Eckner - 14.11.2018
FS#56 - libreoffice-fresh 6.1.3-1.0 in [extra] is not build against packages in it
libreoffice-fresh seems not to be build against packages in [extra], but rather against packages in [*testing].
Running libreoffice produces the following error message:
/usr/lib/libreoffice/program/soffice.bin: error while loading shared libraries: liborcus-0.14.so.0: cannot open shared object file: No such file or directory
extra/liborcus is 0.13.4-3.1 testing/liborcus is 0.14.1-1.0 Closed by Erich Eckner 14.11.2018 18:05 Reason for closing: Fixed
Comments (1)
Related Tasks (0/0)
Admin Erich Eckner commented on 12.11.2018 10:37
I moved liborcus and libixion from testing to extra - now it should work.
Google Cache
|
|
140 | Packages | Bug Report | Medium | Low | libproxy doesn't build | Closed | |
Task Description
-- Installing: /build/libproxy/pkg/libproxy/usr/include/proxy.h
-- Installing: /build/libproxy/pkg/libproxy/usr/bin/proxy
mv: cannot stat '/build/libproxy/pkg/libproxy/usr/lib/libproxy/*/modules/pacrunner_webkit.so': No such file or directory
==> ERROR: A failure occurred in package_libproxy().
Aborting...
|
|
123 | Packages | Bug Report | Medium | Low | libhandy0, libhandy conflicts | Closed | |
Task Description
libhandy0: /usr/share/vala/vapi/libhandy-0.0.deps exists in filesystem (owned by libhandy) libhandy0: /usr/share/vala/vapi/libhandy-0.0.vapi exists in filesystem (owned by libhandy)
|
|
57 | Packages: Stable | Bug Report | Medium | Low | libc fails on AMD-K6 | Closed | |
Task Description
Attached to Project: Archlinux32 Opened by Andreas Baumann - 15.11.2018 Last edited by Andreas Baumann - 31.01.2019
FS#57 - libc fails on AMD-K6
pacstrap /test base LD_LIBRARY_PATH=/test/usr/lib gdb –args /test/bin/bash results in:
Program terminated with signal SIGILL, Illegal instruction. #0 0xb7619991 in strcmp () from /test/usr/lib/libc.so.6 (gdb) bt #0 0xb7619991 in strcmp () from /test/usr/lib/libc.so.6 #1 0xb75bd41f in setlocale () from /test/usr/lib/libc.so.6 #2 0x0076b7f2 in ?? () #3 0x0053acf6 in ?? () #4 0xb75b3a31 in __libc_start_main () from /test/usr/lib/libc.so.6 #5 0x0053e561 in ?? ()
So, getting the exact failing opcode is hard.
2.28-5.0 was ok, 2.28-5.2 is not.
So it’s something we changed or something changed on one of the i486 build slaves.
Happens only on the AMD-K6, all other machines with CPUs with limited special instruction sets (Pentium-S, AMD Geode) are working fine. Closed by Andreas Baumann 31.01.2019 13:50 Reason for closing: Fixed Additional comments about closing:
works with glibc-2.28-5.5-i486
Comments (11)
Related Tasks (0/0)
Admin Andreas Baumann commented on 10.01.2019 08:27
happens on a Pentium-S now too. Pentium-II is still fine, so is AMD Geode.. Admin Andreas Baumann commented on 24.01.2019 10:10
Finally got around to tackle this one installing a minimal chroot with:
pacstrap /test bash
Then debugging the chroot call:
gdb –args /usr/bin/chroot /test
yields:
Dump of assembler code for function memcpy:
0xb7ff22f0 <+0>: test %al,%al
0xb7ff22f2 <+2>: jne 0xb7ff22e8
0xb7ff22f4 <+4>: xor %eax,%eax
0xb7ff22f6 <+6>: ret
0xb7ff22f7 <+7>: mov $0x1,%eax
0xb7ff22fc <+12>: mov $0xffffffff,%ecx
> 0xb7ff2301 <+17>: cmovb %ecx,%eax
0xb7ff2304 <+20>: ret
End of assembler dump.
So, we got cmov creeping in.
/proc/cpuinfo tells us that neither early Pentiums nor AMD K6 had a CMOV opcode.
Now the trick question is, why is it creeping into the C library?
Is the C library compiled with the wrong flags? Is the gcc assuming that every CPU has a CMOV instruction? Are flags wrong there or is CMOV suddenly the default? Admin Andreas Baumann commented on 24.01.2019 10:39
Checking in glibc: this is the offending opcode
i686/strcmp.S: cmovbl %ecx, %eax
L(neq): movl $1, %eax
movl $-1, %ecx
cmovbl %ecx, %eax
Now the question is, why does glibc think it’s ok to use i686 optimizations when compiling with -march-i486. Admin Andreas Baumann commented on 24.01.2019 11:09
Not found an obvious reason, retriggering rebuild on known-good (hopefully) i486 build slave. Admin Andreas Baumann commented on 24.01.2019 20:44
config.log shows me i686 as build host. This is guessed with config.guess. Manually executing config.guess on the build machine results in i486-pc-linux-gnu. setarch i486 ./config.guess results in i686-pc-linux-gnu. setarch i486 uname -m results in i686.
This breaks every build on i486!
/usr/bin/setarch is owned by util-linux 2.33.1-2.3 and is is completly broken!
And of course, it’s used in setarch “${arch}” mkarchroot in staging-i486-build.
So the consequenses are: - devtools32 must NOT use setarch anywhere in the *i486* files - the whole i486 toolchain and all packages have to be rebuilt (basically from the stage of last bootstrapping, every package above could contain bad opcodes!).
The irony is, that building just with makepkg on a emulated i486 virtual machine works fine, using the devtools breaks things.. Admin Andreas Baumann commented on 24.01.2019 21:11
Actually, thinking about it: I should try to patch setarch in coreutils for i486. So we don’t have to fork devtools32 too much from upstream..
binutils and gcc have an explicit host and build flags, so they should be fine. Maybe rebuilding just glibc with a fixed setarch is sufficient. Admin Andreas Baumann commented on 24.01.2019 21:15
If we are unlucky, utsname information in setarch.c is wrong and it’s not a coreutils problem.. Admin Andreas Baumann commented on 25.01.2019 08:05
The man page of setarch documents the bug:
The execution domains currently only affects the output of uname -m. For example, on an AMD64 sys-
tem, running setarch i386 program will cause program to see i686 instead of x86_64 as the machine
type. It also allows to set various personality options. The default program is /bin/sh.
So, we are not allowed to fix this, as other programs may rely on the bug.
So, fixing the devtools32 it is… Admin Andreas Baumann commented on 25.01.2019 09:15
setarch bug reported here:
https://github.com/karelzak/util-linux/issues/707
and here:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=506632
uname -p reports unknown, this explains why config.guess relies on uname -m to guess the CPU.
We came to those possible solutions: - fix setarch.c (rather let it report something different than what the kernel is providing) - add flags to devtools32 to switch off setarch usage (means, we can no longer build i486 on x86_64 slaves) - add –build=i486-pc-linux-gnu in every configure call necessary - go with the CLFS uname hack - hack setarch of the host machine Admin Andreas Baumann commented on 27.01.2019 16:05
The CLFS uname hack solution.
http://trac.clfs.org/ticket/146
http://clfs.org/view/svn/ppc/chroot/before-chroot.html Admin Andreas Baumann commented on 27.01.2019 18:04
wget http://clfs.org/files/extras/uname_hack-20080713.tar.bz2
PKGBUILD of linux: _srcver=4.20.4-arch1 pkgver=${_srcver//-/.} pkgrel=1.0 make modules_prepare
make -C /root/linux/src/archlinux-linux SUBDIRS=$PWD uname_hack_fake_machine=i486
insmod uname_hack.ko
setarch i486 uname -m i686 setarch i486 ./config.guess i686-pc-linux-gnu
Ok, the uname hack no longer works, or setarch doesn’t rely on this module information.
Google Cache
|
|
212 | Packages | Bug Report | Very Low | High | libblockdev issue with glibc | Closed | |
Task Description
Trying to start udisks2 daemon (systemctl start udisks2.service) fails because of a library issue.
/usr/lib/udisks2/udisksd: symbol lookup error: /usr/lib/libbd_utils.so.2: undefined symbol: g_spawn_check_wait_status
Maybe libblockdev needs to be recompiled with the right glibc version.
Thus, it is not possible to auto-mount external USB drives.
|
|
133 | Packages | Bug Report | Medium | Low | libao and libpulse mixup | Closed | |
Task Description
resolving dependencies...
warning: cannot resolve "libpulse.so=0-32", a dependency of "libao"
warning: cannot resolve "libpulse-simple.so=0-32", a dependency of "libao"
:: The following package cannot be upgraded due to unresolvable dependencies:
libao
:: Do you want to skip the above package for this upgrade? [y/N] n
error: failed to prepare transaction (could not satisfy dependencies)
:: unable to satisfy dependency 'libpulse.so=0-32' required by libao
:: unable to satisfy dependency 'libpulse-simple.so=0-32' required by libao
|
|
30 | Packages | Bug Report | Medium | Low | libaio, will fail with stack smash protection enabled . ... | Closed | |
Task Description
12.04.2018 - io_queue_run.os: In function `io_queue_run’: io_queue_run.c:(.text+0×71): undefined reference to `__stack_chk_fail_local’ io_getevents.os: In …
|
|
67 | Packages: Stable | Bug Report | Medium | Low | ldc segfault - Arch Linux | Closed | |
Task Description
01.05.2019 - Program terminated with signal SIGSEGV, Segmentation fault. #0 0xb30d3329 in getenv () from /usr/lib/libc.so.6 (gdb) bt #0 0xb30d3329 in …
|
|
147 | Packages | Bug Report | Medium | Low | kpgp fails at startup | Closed | |
Task Description
Feb 12 11:57:48 arch32-testing-pentium4 audit[9829]: USER_LOGIN pid=9829 uid=0 auid=1000 ses=7 msg='op=login id=1000 exe="/usr/bin/lightdm" hostname=arch32-testing-pentium4 addr=? terminal=/dev/tty7 res=success'
Feb 12 11:57:48 arch32-testing-pentium4 kernel: audit: type=1112 audit(1613127468.816:104): pid=9829 uid=0 auid=1000 ses=7 msg='op=login id=1000 exe="/usr/bin/lightdm" hostname=arch32-testing-pentium4 addr=? terminal=/dev/tty7 res=success'
Feb 12 11:57:55 arch32-testing-pentium4 kaccess[9880]: Xlib XKB extension major= 1 minor= 0
Feb 12 11:57:56 arch32-testing-pentium4 kaccess[9880]: QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-guest'
Feb 12 11:57:58 arch32-testing-pentium4 kaccess[9880]: "Session bus not found\nTo circumvent this problem try the following command (with Linux and bash)\nexport $(dbus-launch)"
Feb 12 11:58:00 arch32-testing-pentium4 kgpg[9909]: QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-guest'
Feb 12 11:58:01 arch32-testing-pentium4 kgpg[9909]: QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-guest'
Feb 12 11:58:01 arch32-testing-pentium4 kgpg[9909]: QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-guest'
Feb 12 11:58:01 arch32-testing-pentium4 kgpg[9909]: "Session bus not found\nTo circumvent this problem try the following command (with Linux and bash)\nexport $(dbus-launch)"
|
|
160 | Packages | Bug Report | Medium | Low | konqueror fails to work | Closed | |
Task Description
re.so.8 error messages, re.so.9 is in stable
and then segfaults in libQt5WebEngineCore
|
|
114 | Packages: Stable | Bug Report | Very Low | Medium | Kmail: symbol lookup error | Closed | |
Task Description
Kmail 20.08.1-1.0 fails to start with symbol lookup error.
Steps to reproduce: invoking kmail on the console shows:
kmail: symbol lookup error: /usr/lib/libKF5MailImporter.so.5: undefined symbol: _ZN9PimCommon15CustomLogWidgetC1EP7QWidget
Downgrading messagelib fixes this issue but generates other issues (missing files or other undefined symbols).
After all I didn’t find a solution.
|
|
210 | Packages | Bug Report | Very Low | Medium | keymap don't gets fixed on login as set in /etc/vconsol... | Unconfirmed | |
Task Description
gzip comes with asm code, if enabled, built a TEXTREL which gets bloqued on boot, so systemd don’t set keymap A lot of tricks in forums, old thread more complete here $506 An old problem. Work around while asm gets fixed is call configure with DEFS=”NO_ASM” like this:
...
export DEFS="NO_ASM"
./configure ....
or,
./configure DEFS="NO_ASM" ....
I have not tested it, but gentoo on x32 have gzip like this and no TEXTRELS here. No matter i486, i686 or pentium.
Hope it helps.
Best regards.
|
|
167 | Packages: Stable | Bug Report | Very Low | Medium | Kernel lost crypto support necessary for iwd | Closed | |
Task Description
With linux 5.11.1.arch1-1.0, iwd no longer works for associating with WPA2 access points. On attempting to start the service, the journal reads:
iwd: RC4 support not found
iwd: The following options are missing in the kernel:
iwd: CONFIG_CRYPTO_USER_API_SKCIPHER
iwd: CONFIG_CRYPTO_ECB
iwd: CONFIG_CRYPTO_ARC4
It would be nice to have these options enabled in the kernel config, so as to continue support for the iwd package.
|
|
83 | Packages: Stable | Bug Report | Medium | Low | kdeinit5 is filling the systemd journal with nonsensica ... | Closed | |
Task Description
Attached to Project: Archlinux32 Opened by Andreas Baumann - 13.07.2019
FS#83 - kdeinit5 is filling the systemd journal with nonsensical messages
Jul 13 20:12:45 arch32-stable-pentium4 kdeinit5[1037]: (QUrl(”tags:/”)) Jul 13 20:12:45 arch32-stable-pentium4 kdeinit5[1037]: () Jul 13 20:12:45 arch32-stable-pentium4 kdeinit5[1037]: (QUrl(”tags:/”)) Jul 13 20:12:45 arch32-stable-pentium4 kdeinit5[1037]: (QUrl(”tags:/”)) Jul 13 20:12:45 arch32-stable-pentium4 kdeinit5[1037]: () Jul 13 20:12:45 arch32-stable-pentium4 kdeinit5[1037]: (QUrl(”tags:/”)) Jul 13 20:12:45 arch32-stable-pentium4 kdeinit5[1037]: (QUrl(”tags:/”)) Jul 13 20:12:45 arch32-stable-pentium4 kdeinit5[1037]: () Jul 13 20:12:45 arch32-stable-pentium4 kdeinit5[1037]: (QUrl(”tags:/”)) Jul 13 20:12:45 arch32-stable-pentium4 kdeinit5[1037]: (QUrl(”tags:/”)) Jul 13 20:12:45 arch32-stable-pentium4 kdeinit5[1037]: () Jul 13 20:12:45 arch32-stable-pentium4 kdeinit5[1037]: (QUrl(”tags:/”)) Jul 13 20:12:45 arch32-stable-pentium4 kdeinit5[1037]: (QUrl(”tags:/”)) Jul 13 20:12:45 arch32-stable-pentium4 kdeinit5[1037]: ()
225 root 20 0 359832 225172 224128 S 24.5 29.5 0:45.52 systemd-journal
Upstream too? Or is it fast enough if one core is dedicated to output nonsensical output.. :->
Google Cache
|
|
81 | Packages: Stable | Bug Report | Medium | Low | KDE/Plasma crashes on startup (i686) | Closed | |
Task Description
Attached to Project: Archlinux32 Opened by Andreas Baumann - 07.07.2019
FS#81 - KDE/Plasma crashes on startup (i686)
Application: ksplashqml (ksplashqml), signal: Aborted Using host libthread_db library “/usr/lib/libthread_db.so.1”. [Current thread is 1 (Thread 0xb21d5900 (LWP 427))]
Thread 3 (Thread 0xaa75cb40 (LWP 429)): #0 0xb4b95418 in g_main_context_prepare () from /usr/lib/libglib-2.0.so.0 #1 0xb4b959f7 in ?? () from /usr/lib/libglib-2.0.so.0 #2 0xb4b95be6 in g_main_context_iteration () from /usr/lib/libglib-2.0.so.0 #3 0xb6e75ce5 in QEventDispatcherGlib::processEvents(QFlags) () from /usr/lib/libQt5Core.so.5 #4 0xb6e18ef5 in QEventLoop::exec(QFlags) () from /usr/lib/libQt5Core.so.5 #5 0xb6c5fe1a in QThread::exec() () from /usr/lib/libQt5Core.so.5 #6 0xb66317c3 in ?? () from /usr/lib/libQt5Qml.so.5 #7 0xb6c611cc in ?? () from /usr/lib/libQt5Core.so.5 #8 0xb5e34018 in start_thread () from /usr/lib/libpthread.so.0 #9 0xb697c25a in clone () from /usr/lib/libc.so.6
Thread 2 (Thread 0xb1a18b40 (LWP 428)): #0 0xb7f6a82d in kernel_vsyscall () #1 0xb6972873 in poll () from /usr/lib/libc.so.6 #2 0xb550c6ce in ?? () from /usr/lib/libxcb.so.1 #3 0xb550e864 in xcb_wait_for_event () from /usr/lib/libxcb.so.1 #4 0xb1bad3da in ?? () from /usr/lib/libQt5XcbQpa.so.5 #5 0xb6c611cc in ?? () from /usr/lib/libQt5Core.so.5 #6 0xb5e34018 in start_thread () from /usr/lib/libpthread.so.0 #7 0xb697c25a in clone () from /usr/lib/libc.so.6
Thread 1 (Thread 0xb21d5900 (LWP 427)): [KCrash Handler] #6 0xb7f6a82d in kernel_vsyscall () #7 0xb68c4376 in raise () from /usr/lib/libc.so.6 #8 0xb68ae299 in abort () from /usr/lib/libc.so.6 #9 0xb6c1f873 in QMessageLogger::fatal(char const*, …) const () from /usr/lib/libQt5Core.so.5 #10 0xb6387c44 in QV4::Compiler::Codegen::visit(QQmlJS::AST::UiProgram*) () from /usr/lib/libQt5Qml.so.5 #11 0xb64298d6 in QJSEngine::QJSEngine(QJSEnginePrivate&, QObject*) () from /usr/lib/libQt5Qml.so.5 #12 0xb6575fcd in QQmlEngine::QQmlEngine(QObject*) () from /usr/lib/libQt5Qml.so.5 #13 0xb6888bc4 in KDeclarative::QmlObjectSharedEngine::QmlObjectSharedEngine(QObject*) () from /usr/lib/libKF5Declarative.so.5 #14 0xb7f0fb00 in KQuickAddons::QuickViewSharedEngine::QuickViewSharedEngine(QWindow*) () from /usr/lib/libKF5QuickAddons.so.5 #15 0x0040a29b in ?? () #16 0x00408e7a in ?? () #17 0x004095a2 in ?? () #18 0x004081de in ?? () #19 0xb68af7b9 in __libc_start_main () from /usr/lib/libc.so.6 #20 0x004082e5 in _start () [Inferior 1 (process 427) detached]
Google Cache
|
|
355 | Packages | Bug Report | Medium | Critical | KDE packages fail to install because of /lib | New | |
Task Description
Some KDE packages try to replace the ‘lib’ symlink with a directory, causing the system to fail to start.
If you are lucky, pacman warns you about it and says:
pacman -S breeze-icons
resolving dependencies...
looking for conflicting packages...
Packages (1) breeze-icons-6.0.0-1.0
Total Installed Size: 71.92 MiB
Net Upgrade Size: 0.61 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [##################################] 100%
(1/1) checking package integrity [##################################] 100%
(1/1) loading package files [##################################] 100%
(1/1) checking for file conflicts [##################################] 100%
error: failed to commit transaction (conflicting files)
breeze-icons: /lib exists in filesystem (owned by filesystem)
Errors occurred, no packages were upgraded
I had one hard-to-reproduce case where I basically nuked my VMs with that.
The recovery procedure in this case is:
# Boot from last ISO
# mount /dev/xxx to /mnt
cd /usr
mv lib/cmake/* usr/lib/cmake/.
mv lib/qml /usr/lib/.
rmdir lib/cmake
rmdir lib
ln -s usr/lib lib
Packages known to misbehave are ‘kqtquickcharts’, ‘breeze-icons’. Surely more to follow..
|
|
95 | Packages: Stable | Bug Report | Very Low | High | KDE broken since KDE Frameworks 5.64 update | Closed | |
Task Description
KDE applications fail to start with the following error:
symbol lookup error: /usr/lib/libKF5QuickAddons.so.5: undefined symbol: _ZNK19KCoreConfigSkeleton10isDefaultsEv
The affected applications I’ve found so far are: dolphin 19.08.3-1.0 kwin 5.17.3-1.0 plasma-workspace 5.17.0-2.0
After downgrading kdeclarative to 5.63.0-1.0 kwin and plasma start but dolphin fails with a new error:
dolphin: symbol lookup error: /usr/lib/libKF5KCMUtils.so.5: undefined symbol: _ZNK12KQuickAddons12ConfigModule11errorStringEv
Downgrading kcmutils to 5.63.0-1.0 finally fixed dolphin.
|
|
80 | Packages: Build-list | Bug Report | Medium | Low | kate refuses to build due to some broken shared ... | Closed | |
Task Description
07.07.2019 - FS#80 - kate refuses to build due to some broken shared library dependencies. /usr/bin/ld: warning: libgit2.so.27, needed by …
|
|
297 | Packages | Bug Report | Very Low | Low | jack2 can not install | Closed | |
Task Description
# pacman -S jack --noconfirm
:: There are 2 providers available for jack:
:: Repository extra
1) jack2 2) pipewire-jack
Enter a number (default=1):
resolving dependencies...
warning: cannot resolve "libcelt0.so=2-32", a dependency of "jack2"
:: The following package cannot be upgraded due to unresolvable dependencies:
jack2
:: Do you want to skip the above package for this upgrade? [y/N] error: failed to prepare transaction (could not satisfy dependencies)
:: unable to satisfy dependency 'libcelt0.so=2-32' required by jack2
|
|
172 | Packages | Bug Report | Very Low | Medium | iwd requires some kernel flags | Unconfirmed | |
Task Description
RC4 support not found The following options are missing in the kernel:
CONFIG_CRYPTO_USER_API_SKCIPHER
CONFIG_CRYPTO_ECB
CONFIG_CRYPTO_ARC4
|