|
172 | Packages | Bug Report | Very Low | Medium | iwd requires some kernel flags | Unconfirmed | |
Task Description
RC4 support not found
The following options are missing in the kernel:
CONFIG_CRYPTO_USER_API_SKCIPHER
CONFIG_CRYPTO_ECB
CONFIG_CRYPTO_ARC4
|
|
209 | Packages | Bug Report | Very Low | Low | Intel High Definition Audio issue. | Unconfirmed | |
Task Description
I am using Arch Linux 32 latest version on Sony VAIO VGN-FS215Z . The following is the audio device:
-fs215z:~$ lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
When I boot the system after some time getting crackling sound in speaker. Sometimes it stops after few minutes and sometimes continue to sound. Really annoying. I am not getting the normal audio in any application. This problem was there in debian based OSs also but not there in any other OS.
Please help.
|
|
210 | Packages | Bug Report | Very Low | Medium | keymap don't gets fixed on login as set in /etc/vconsol... | Unconfirmed | |
Task Description
gzip comes with asm code, if enabled, built a TEXTREL which gets bloqued on boot, so systemd don’t set keymap
A lot of tricks in forums, old thread more complete here $506 An old problem. Work around while asm gets fixed is call configure with DEFS=”NO_ASM” like this:
...
export DEFS="NO_ASM"
./configure ....
or,
./configure DEFS="NO_ASM" ....
I have not tested it, but gentoo on x32 have gzip like this and no TEXTRELS here.
No matter i486, i686 or pentium.
Hope it helps.
Best regards.
|
|
243 | Packages | Bug Report | Very Low | Medium | [linux and linux-zen] 5.16.12 needs a rebuild with gcc... | New | |
Task Description
[linux and linux-zen] 5.16.12 needs a rebuild with gcc 11.2 so DKMS packages will work
get errors when dkms installing in make log
cc1: error: incompatible gcc/plugin versions
cc1: error: failed to initialize plugin ./scripts/gcc-plugins/structleak_plugin.so
|
|
283 | Packages | Bug Report | Very Low | Low | [icu70/icu71 ] packages not rebuilt yet | Assigned | |
Task Description
starting to collect them here packages which require icu69 (and have thus not been rebuilt
for icu 71 yet):
libreoffice-fresh
|
|
287 | Packages | Feature Request | Very Low | Low | chromium not able to build | Assigned | |
Task Description
Wait unfortunately i found a patch through which chromium would compile on x86
please try to build chromium using those patches
https://github.com/void-linux/void-packages/blob/master/srcpkgs/chromium/patches/reenable-linux-i686-builds.patch https://github.com/void-linux/void-packages/blob/master/srcpkgs/chromium/patches/chromium-i686-vaapi-fpermissive.patch https://github.com/void-linux/void-packages/blob/master/srcpkgs/chromium/patches/chromium-105-bitmap-include.patch https://github.com/void-linux/void-packages/blob/master/srcpkgs/chromium/patches/chromium-105-browser-include.patch
|
|
294 | Packages | Bug Report | Very Low | High | [qtile] importlib.metadata.PackageNotFoundError: No pac... | Assigned | |
Task Description
When running qtile I get the following error message:
[qtile] importlib.metadata.PackageNotFoundError: No package metadata was found for qtile
Running qtile on Arch Linux works as expected.
$ qtile start
Traceback (most recent call last):
File "/usr/bin/qtile", line 33, in <module>
sys.exit(load_entry_point('qtile==0.18.1', 'console_scripts', 'qtile')())
File "/usr/bin/qtile", line 22, in importlib_load_entry_point
for entry_point in distribution(dist_name).entry_points
File "/usr/lib/python3.10/importlib/metadata/__init__.py", line 957, in distribution
return Distribution.from_name(distribution_name)
File "/usr/lib/python3.10/importlib/metadata/__init__.py", line 548, in from_name
raise PackageNotFoundError(name)
importlib.metadata.PackageNotFoundError: No package metadata was found for qtile
$ pacman -Qi qtile
Name : qtile
Version : 0.18.1-3.0
Description : A full-featured, pure-Python tiling window manager
Architecture : pentium4
URL : http://www.qtile.org
Licenses : MIT
Groups : None
Provides : None
Depends On : gdk-pixbuf2 glibc libnotify librsvg pango python-cairocffi python-cffi python-xcffib python-gobject python-setuptools
Optional Deps : alsa-utils: for volume widget
canto-daemon: for canto widget
cmus: for cmus widget
jupyter_console: for interaction with qtile via Jupyter
khal: for khal_calendar widget
libpulse: for pulse_volume and pulseaudio_ffi widget [installed]
lm_sensors: for sensors widget [installed]
moc: for moc widget
python-dbus-next: for utils, notifications and several widgets
python-iwlib: for wlan widget
python-keyring: for imapwidget widget
python-mpd2: mpd2widget widget
python-psutil: graph, net and memory widget [installed]
python-pywlroots: for experimental wayland support
python-setproctitle: change process name to qtile
python-xdg: launchbar widget
Required By : None
Optional For : None
Conflicts With : None
Replaces : None
Installed Size : 3.25 MiB
Packager : Andreas Baumann <mail@andreasbaumann.cc>
Build Date : Mon 04 Oct 2021 12:02:58
Install Date : Mon 26 Sep 2022 13:33:45
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature
$ sudo pacman -Syu
:: Synchronizing package databases...
core downloading...
extra downloading...
community downloading...
:: Starting full system upgrade...
there is nothing to do
|
|
314 | Packages | Bug Report | Very Low | Low | Mumble requires a outdated protobuf | Unconfirmed | |
Task Description
libprotobuf=28 is a mumble (package) dependency, but protobuf package has libprotobuf=32.
I needed to downgrade to protobuf-3.17.3-1.3-pentium4.pkg.tar.zst (from the archive) to install mumble.
|
|
322 | Packages: Stable | Bug Report | Very Low | Medium | file header absent | New | |
Task Description
on fresh install file /usr/lib/libbfd.so lacks header “/* GNU ld script */” so I see complains on terminal
|
|
325 | Packages | Bug Report | Very Low | High | [terminus] crashes with message undefined symbol: cairo... | Unconfirmed | |
Task Description
Starting terminus gives following error:
from ._cairo import * # noqa: F401,F403
ImportError: /usr/lib/python3.10/site-packages/cairo/_cairo.cpython-310-i386-linux-gnu.so: undefined symbol: cairo_tee_surface_index
Bug seens to be related to
https://bugs.archlinux.org/task/77367
There is generall mess on cairo related files for different architectures (pentium4, i486, i686) - some packages for one architecture are outdated, while for other archictectures are up to date, for instance:
python-cairo i486/extra : 1.21.0-1.0
python-cairo i686/extra : 1.23.0-3.0
python-cairo pentium4/extra : 1.23.0-3.0
|
|
333 | Packages | Bug Report | Very Low | High | Sddm 0.19.0-9.0 crashes with Qt 5.15.9 | Assigned | |
Task Description
The current version of sddm (0.19.0-9.0) depends on the previous version of Qt (5.15.8). After updating Qt, sddm crashes with an incompatible Qt library error.
|
|
335 | Packages | Bug Report | Very Low | Medium | python-setuptools-scm 7.1.0-4.1 missing dependency | Unconfirmed | |
Task Description
python-setuptools-scm 7.1.0-4.1 as found in the repo is missing the dependencies python-packaging and python-setuptools, which breaks the build of many other packages.
|
|
336 | Packages | Bug Report | Very Low | Low | [pyqt-builder]: needs rebuild | Unconfirmed | |
Task Description
just wanted to get this one on the board - i am unable to build ‘python-pyqt5’ which many other packages depend on, such as ‘qutebrowser’
the current ‘python-pyqt5’ PKGBUILD, which builds fine for x86_64 and arm, has unspecified dependencies in the i686 repos - not sure why that is
ModuleNotFoundError: No module named ‘jaraco.functools’
ModuleNotFoundError: No module named ‘jaraco.context’
that is easily fixed by requiring them explicitly:
> makedepends_i686=(’python-jaraco.context’ ‘python-jaraco.functools’)
however, after that, it gives a more fatal error:
sip-build: Unable to import ‘project.py’: No module named ‘pyqtbuild’
that module is in the ‘pyqt-builder’ package, i beleive - ‘pyqt-builder’ is installed as a build dependency; but it was built for python 3.9 - so probably that is why the build could not find the module
|
|
338 | Packages | Bug Report | Very Low | Low | [libreoffice-still]: error while loading shared librari... | Unconfirmed | |
Task Description
needs rebuild against latest ‘boost’
$ sudo pacman -Sy libreoffice-still
$ pacman -Qs libreoffice-still
local/libreoffice-still 7.3.7-2.0
LibreOffice maintenance branch
$ lowriter
javaldx: Could not find a Java Runtime Environment!
Warning: failed to read path from javaldx
/usr/lib/libreoffice/program/soffice.bin: error while loading shared libraries: libboost_locale.so.1.80.0: cannot open shared object file: No such file or directory
|
|
339 | Packages | Bug Report | Very Low | Low | [libcanberra-pulse]: can not be installed | Unconfirmed | |
Task Description
# pacman -S libcanberra-pulse
resolving dependencies...
warning: cannot resolve "libcanberra=0.30+2+gc0620e4-3.2", a dependency of "libcanberra-pulse"
:: The following package cannot be upgraded due to unresolvable dependencies:
libcanberra-pulse
:: Do you want to skip the above package for this upgrade? [y/N]
error: failed to prepare transaction (could not satisfy dependencies)
:: unable to satisfy dependency 'libcanberra=0.30+2+gc0620e4-3.2' required by libcanberra-pulse
|
|
340 | Packages | Bug Report | Very Low | Critical | [chromium] broken due to outdated libraries, plus also ... | Unconfirmed | |
Task Description
The package needs to be recompiled for re2 v10 and several required dependencies were not installed, such as icu69 (?) and more.
|
|
341 | Packages | Bug Report | Very Low | Critical | python3 is version 11, but all packages install only 3.... | Unconfirmed | |
Task Description
From a fresh install just now:
The /usr/lib/python3.10/site-packages folder is full of dozens of files, but there is little in the 3.11 folder. Some examples: gajim yt-dlp zippy samba.
This seems to affect most new packages that I install, so it is by no means limited to just the examples.
|
|
342 | Packages | Bug Report | Very Low | Very Low | nmap missing dependency openssl-1.1 | Unconfirmed | |
Task Description
no task description |
|
343 | Packages | Bug Report | Very Low | Low | Package 'screen 4.9.1-1.0' is missing dependency libute... | Unconfirmed | |
Task Description
Package ‘screen 4.9.1-1.0’ is missing dependency libutempter. I assume this is because libutempter used to be a dependency of util-linux which is part of base, so was assumed to be installed.
With the regular Arch Linux distro libutempter is still a dependency of util-linux.
|
|
345 | Packages | Bug Report | Very Low | Low | [gcompris-qt] doesn't start due to Qt 5.15.10 | Unconfirmed | |
Task Description
I fails to start with: “Cannot mix incompatible Qt library (5.15.9) with this library (5.15.10)”
|
|
346 | Packages | Bug Report | Very Low | Low | pandoc: error while loading shared libraries | Unconfirmed | |
Task Description
# pacman -Syyuu base
# pacman -S pandoc
# pandoc
pandoc: error while loading shared libraries: libHSzip-archive-0.4.1-FOOm53qGfUr2AB1Oel9iH4-ghc8.10.2.so: cannot open shared object file: No such file or directory
|
|
347 | Packages | Bug Report | Very Low | Low | Meld will not start - error message -> Meld requires Gt... | Unconfirmed | |
Task Description
[keith@Arch32 ~]$ meld
Meld requires Gtk+ 3.20 or higher.
[keith@Arch32 ~]$ pacman -Qi meld
Name : meld
Version : 3.22.0-2.0
Description : Compare files, directories and working copies
Architecture : any
URL : https://meldmerge.org/ Licenses : GPL Groups : None
Provides : None
Depends On : python-gobject python-cairo gtksourceview4 gsettings-desktop-schemas dconf
Optional Deps : None
Required By : None
Optional For : None
Conflicts With : None
Replaces : None
Installed Size : 5.06 MiB
Packager : TasosSah arch32@tasossah.com Build Date : Sat 19 Aug 2023 23:25:57 BST
Install Date : Sat 26 Aug 2023 07:08:59 BST
Install Reason : Explicitly installed
Install Script : No
Validated By : Signature
[keith@Arch32 ~]$ pacman -Qi gtksourceview4
Name : gtksourceview4
Version : 4.8.4-1.0
Description : A text widget adding syntax highlighting and more to GNOME
Architecture : pentium4
URL : https://wiki.gnome.org/Projects/GtkSourceView Licenses : GPL Groups : None
Provides : libgtksourceview-4.so=0-32
Depends On : gtk3 libxml2
Optional Deps : None
Required By : meld xed
Optional For : None
Conflicts With : None
Replaces : None
Installed Size : 7.44 MiB
Packager : Andreas Baumann mail@andreasbaumann.cc Build Date : Mon 07 Nov 2022 11:50:56 GMT
Install Date : Mon 28 Nov 2022 11:49:04 GMT
Install Reason : Installed as a dependency for another package
Install Script : No
Validated By : Signature
[keith@Arch32 ~]$ pacman -Qi gtk3
Name : gtk3
Version : 1:3.24.37-1.0
Description : GObject-based multi-platform GUI toolkit
Architecture : pentium4
URL : https://www.gtk.org/ Licenses : LGPL Groups : None
Provides : gtk3-print-backends libgailutil-3.so=0-32 libgdk-3.so=0-32 libgtk-3.so=0-32
Depends On : adwaita-icon-theme atk cairo cantarell-fonts dconf desktop-file-utils fontconfig fribidi gdk-pixbuf2 glib2 harfbuzz iso-codes
libcloudproviders libcolord libcups libegl libepoxy libgl librsvg libxcomposite libx11 libxcursor libxdamage libxext libxfixes
libxi libxinerama libxkbcommon libxrandr libxrender pango shared-mime-info wayland at-spi2-core tracker3 gtk-update-icon-cache
Optional Deps : evince: Default print preview command
Required By : bleachbit engrampa firefox gcr gpicview gspell gtkmm3 gtksourceview4 libdbusmenu-gtk3 libgnomekbd libindicator-gtk3 libnma
libpeas lightdm-gtk-greeter lxmusic vte3 xdg-user-dirs-gtk
Optional For : avahi gvfs libcanberra libdecor libreoffice-still
Conflicts With : gtk3-print-backends
Replaces : gtk3-print-backends⇐3.22.26-1
Installed Size : 49.88 MiB
Packager : Andreas Baumann mail@andreasbaumann.cc Build Date : Sun 16 Apr 2023 11:18:09 BST
Install Date : Tue 25 Apr 2023 13:06:04 BST
Install Reason : Installed as a dependency for another package
Install Script : Yes
Validated By : Signature
[keith@Arch32 ~]$
|
|
351 | Packages: Stable | Bug Report | Very Low | Medium | Various python-X packages building for Python 3.10 and ... | New | |
Task Description
yes, confirmed, that’s because python 3.11 is the only package building and being
published to stable, the python modules need bootstrapping (since months).
|
|
352 | Packages | Bug Report | Very Low | Low | gmtp in extra is broken | Unconfirmed | |
Task Description
It is an i686-system.
steps to reproduce:
1) # pacman -Syyuu base
2) # pacman -S gmtp
3) $ gmtp
expected result:
Start screen of gmtp appears.
actual result:
$ gmtp
gmtp: error while loading shared libraries: libFLAC.so.8: cannot open shared object file: No such file or directory
gmtp in extra-staging works though
|
|
220 | Packages | Bug Report | Very High | Critical | [python] completly broken | Closed | |
Task Description
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/mercurial/policy.py", line 69, in _importfrom
fakelocals[modname] = mod = getattr(pkg, modname)
File "/usr/lib/python3.9/site-packages/mercurial/pycompat.py", line 307, in w
return f(object, sysstr(name), *args)
AttributeError: module ‘mercurial.cext’ has no attribute ‘parsers’
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/bin/hg", line 61, in <module>
dispatch.run()
File "/usr/lib/python3.10/importlib/util.py", line 247, in __getattribute__
self.__spec__.loader.exec_module(self)
File "<frozen importlib._bootstrap_external>", line 883, in exec_module
File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed
File "/usr/lib/python3.9/site-packages/mercurial/dispatch.py", line 21, in <module>
from .i18n import _
File "/usr/lib/python3.10/importlib/util.py", line 247, in __getattribute__
self.__spec__.loader.exec_module(self)
File "/usr/lib/python3.9/site-packages/mercurial/i18n.py", line 123, in <module>
if _plain():
File "/usr/lib/python3.9/site-packages/mercurial/i18n.py", line 115, in _plain
b'HGPLAIN' not in encoding.environ
File "/usr/lib/python3.10/importlib/util.py", line 247, in __getattribute__
self.__spec__.loader.exec_module(self)
File "/usr/lib/python3.9/site-packages/mercurial/encoding.py", line 41, in <module>
charencode = policy.importmod('charencode')
File "/usr/lib/python3.9/site-packages/mercurial/policy.py", line 116, in importmod
mod = _importfrom(pn, mn)
File "/usr/lib/python3.9/site-packages/mercurial/policy.py", line 71, in _importfrom
raise ImportError('cannot import name %s' % modname)
ImportError: cannot import name parsers
for instance when building nss.
|
|
225 | Packages | Bug Report | High | Critical | [zstd] 1.5.1, zstd compressed ramdisk fails to load pro ... | Closed | |
Task Description
kernel issue with some network card and/or
systemd subservice not working add all
I cannot login remotely or locally.
System drops to maintainance shell..
Not a single systemd subdaemon is working..
This also effectively kills all i486 build machines..
|
|
2 | Packages: Stable | Bug Report | Medium | Low | this is a test-issue for [lapack] (not a real bug) - Ar ... | Closed | |
Task Description
07.11.2017 - FS#2 - this is a test-issue for [lapack] (not a real bug). human: ignore this build master: do not ignore this. Closed by Erich Eckner 07.11.2017 …
|
|
3 | Packages: Stable | Bug Report | Medium | Low | [ffmpeg] missing FLAC codec | Closed | |
Task Description
Opened by Andreas Baumann - 07.11.2017
Last edited by Erich Eckner - 07.11.2017
FS#3 - [ffmpeg] missing FLAC codec
Playing 10.Motion_Picture_Soundtrack.flac.
Audio only file format detected.
Load subtitles in ./
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
[flac @ 0xb68902c0]Got unexpected packet size after a partial decode
[flac @ 0xb68902c0]Got unexpected packet size after a partial decode
[flac @ 0xb68902c0]Got unexpected packet size after a partial decode
[flac @ 0xb68902c0]Got unexpected packet size after a partial decode
[flac @ 0xb68902c0]Got unexpected packet size after a partial decode
[flac @ 0xb68902c0]Got unexpected packet size after a partial decode
ADecoder init failed sad
ADecoder init failed sad
Cannot find codec for audio format 0x43614C66.
Audio: no sound
Video: no video
Levi commented on 16.05.2019 20:08
How do I check this? I tested inputting a file to ffmpeg using the -i option and it acted like the output of ffprobe reporting things like the duration correctly before barfing that I hadn’t supplied it with any outputs. Is this fixed therefore?
Admin
Andreas Baumann commented on 17.08.2019 12:23
Output #0, flac, to ‘Kid A (2000)/10.Motion_Picture_Soundtrack.flac’:
Output file #0 does not contain any stream
and this on 64-bit.
I don’t think, flac support is there in ffmpeg
Google Cache
Bing Cache
|
|
4 | Packages: Stable | Bug Report | Medium | Low | [virtualbox-guest-utils] 5.2.0 version broken | Closed | |
Task Description
Attached to Project: Archlinux32
Opened by Andreas Baumann - 07.11.2017
Last edited by Andreas Baumann - 17.12.2017
FS#4 - [virtualbox-guest-utils] 5.2.0 version broken
When starting a virtual machine you get:
VBoxClient: VBoxClient (seamless): failed to start. Stage: Setting guest IRQ filter mask Error: VERR_INTERNAL_ERROR
The solution is to use the guest ISO 5.2.1 for now till the package is upgraded.
Closed by Andreas Baumann
17.12.2017 20:22
Reason for closing: Fixed
Additional comments about closing:
Seems to work now. the modules load, the desktop adapts nicely. mouse works. closing this one.
Comments
Admin
Erich Eckner commented on 17.12.2017 18:46
is this still the case with 5.2.2?
Admin
Andreas Baumann commented on 17.12.2017 18:52
I’ll have to test on a virtualbox vm..
Google Cache
Bing Cache
|
|
5 | Packages | Bug Report | Medium | Low | [sbcl] fails to compile - Arch Linux | Closed | |
Task Description
16.12.2017 - The best, I can get is trying to compile the git HEAD with clisp (instead of sbcl). However, this still errors with: entering make-target-2.sh
|
|
6 | Packages | Bug Report | Medium | Low | [libreoffice-still] 5.3.7-4 crashes when opening a ... | Closed | |
Task Description
07.11.2017 - Nov 07 18:19:32 arch32-testing systemd[1]: Started Process Core Dump (PID 643/UID 0). Nov 07 18:19:35 arch32-testing …
|
|
7 | Packages | Bug Report | Medium | Low | unknown bug FS#7 | Closed | |
Task Description
no task description |
|
8 | Packages: Build-list | Bug Report | Medium | Low | [skia-sharp] [skia-sharp58] build fails | Closed | |
Task Description
Attached to Project: Archlinux32
Opened by Erich Eckner - 11.11.2017
Last edited by Andreas Baumann - 12.11.2017
FS#8 - [skia-sharp] [skia-sharp58] build fails
/startdir/PKGBUILD: line 63: bin/gn: No such file or directory
strange about this:
- works on x86_64
- bin/gn is there and executable
Closed by Andreas Baumann
12.11.2017 14:19
Reason for closing: Won’t implement
Additional comments about closing:
blacklist, no visible 32-bit support.
Comments (7)
Admin
Andreas Baumann commented on 12.11.2017 12:29
When compiling on 64-bit I get several binaries:
src/depot_tools/gn
src/skia/gn
src/skia/buildtools/linux64/gn
src/skia/bin/gn
maybe one with linux32 is missing?
Admin
Andreas Baumann commented on 12.11.2017 12:30
Other things in PKGBUILD:
export PYTHON=’/usr/bin/pyton2’
This hardly works.  Admin
Andreas Baumann commented on 12.11.2017 12:31
The line with bin/gn is a little bit tricky. I’ll try to put an absolute path there..
Admin
Andreas Baumann commented on 12.11.2017 12:32
I also don’t like the ideas of pushd and popd everywhere..
Admin
Andreas Baumann commented on 12.11.2017 12:33
file bin/gn
bin/gn: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.26, BuildID[sha1]=6d551c57efec95b400b9890f89a18e407396c917, stripped
So the file not found means: it exists, but has not been compiled for the correct architecture.
Admin
Andreas Baumann commented on 12.11.2017 13:57
So, removing bin/gn and calling python2 tools/git-sync-deps fetches me a new copy.
Admin
Andreas Baumann commented on 12.11.2017 14:14
So tools/git-sync-deps does:
subprocess.check_call(
[sys.executable,
os.path.join(os.path.dirname(deps_file_path), 'bin', 'fetch-gn')])
which has:
gn_path = ‘buildtools/linux64/gn’ if ‘linux’ in sys.platform else \
'buildtools/mac/gn' if 'darwin' in sys.platform else \
'buildtools/win/gn.exe'
fetching things from Chromium:
f.write(urllib2.urlopen('https://chromium-gn.storage-download.googleapis.com/' + sha1).read())
Changing linux64 to linux32 in a naive approach didn’t fetch a bin/gn.
So I would actually blacklist both packages.
Google Cache
|
|
9 | Packages: Build-list | Bug Report | Medium | Low | [ffmpeg] [ffmpeg2.8] libtheora not found | Closed | |
Task Description
Attached to Project: Archlinux32
Opened by Erich Eckner - 11.11.2017
Last edited by Andreas Baumann - 12.11.2017
FS#9 - [ffmpeg] [ffmpeg2.8] libtheora not found
==> Starting build()… ERROR: libtheora not found
… but it’s there:
/var/lib/archbuild/staging-i686/erich/usr/lib/libtheora.so.0.3.10
/var/lib/archbuild/staging-i686/erich/usr/lib/libtheora.so.0
/var/lib/archbuild/staging-i686/erich/usr/lib/libtheora.so
strange … Closed by Andreas Baumann
12.11.2017 15:40
Reason for closing: Fixed
Additional comments about closing:
fixed in libogg.
Comments (5)
Related Tasks (0/0)
Admin
Andreas Baumann commented on 12.11.2017 14:29
more ffbuild/config.log
BEGIN /tmp/ffconf.6IlfdMzU/test.c
1 #include
2 #include
3 long check_th_info_init(void) { return (long) th_info_init; }
4 int main(void) { int ret = 0;
5 ret |= ((intptr_t)check_th_info_init) & 0xFFFF;
6 return ret; }
END /tmp/ffconf.6IlfdMzU/test.c
gcc -D_ISOC99_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_POSIX_C_SOURCE=200112 -D_XOPEN_SOURCE=
600 -DPIC -std=c11 -fomit-frame-pointer -fPIC -pthread -I/usr/include/p11-kit-1 -I/usr/include/freetype2
-I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/us
r/include/fribidi -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include
/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/har
/
…skipping
In file included from /usr/include/ogg/os_types.h:144:0,
from /usr/include/ogg/ogg.h:25,
from /usr/include/theora/theoraenc.h:24,
from /tmp/ffconf.6IlfdMzU/test.c:1:
/usr/include/ogg/config_types.h:4:10: fatal error: config_types-32.h: No such file or directory
#include “config_types-32.h”
^~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: libtheora not found
Admin
Andreas Baumann commented on 12.11.2017 14:31
/usr/include/ogg/config_types.h
#if WORDSIZE == 32
#include “config_types-32.h”
#elif WORDSIZE == 64
#include “config_types-64.h” #else
#error “Unknown word size” #endif
ls /usr/include/ogg/
config_types-64.h config_types.h ogg.h os_types.h
So ogg misses the 32-bit types header file.. I’ll check there..
Admin
Andreas Baumann commented on 12.11.2017 14:54
Trying a patch in libogg:
sed
s|mv "${pkgdir}"/usr/include/ogg/config_types{,-64}.h|mv "${pkgdir}"/usr/include/ogg/config_types{,-32}.h|
Admin
Andreas Baumann commented on 12.11.2017 14:57
acutally: better remove the whole multilib stuff on 32-bit..
Admin
Andreas Baumann commented on 12.11.2017 15:39
eval “$(
declare -f package | \
sed '
/^.*Resolve multilib conflict/,/^}$/{//p;d;}
'
)”
Back to first version, I’m not a sed-king (rather the very opposite).
Google Cache
|
|
10 | Packages | Bug Report | Medium | Low | unknown bug FS#10 | Closed | |
Task Description
no task description |
|
11 | Packages | Bug Report | Medium | Low | unknown bug FS#11 | Closed | |
Task Description
no task description |
|
12 | Packages: Build-list | Bug Report | Medium | Low | [python-setuptools] check() fails (due to some mpmath i ... | Closed | |
Task Description
Attached to Project: Archlinux32
Opened by Erich Eckner - 15.11.2017
Last edited by Andreas Baumann - 02.10.2019
FS#12 - [python-setuptools] check() fails (due to some mpmath issue?)
during check():
_ sympy/polys/tests/test_rootoftools.py:test_CRootOf_evalf _
File “/build/python-sympy/src/sympy-sympy-1.1.1-py2/sympy/polys/tests/test_rootoftools.py”, line 225, in test_CRootOf_evalf
a, b = rootof(eq, 1).n(2).as_real_imag()
File “sympy/core/evalf.py”, line 1394, in evalf
result = evalf(self, prec + 4, options)
File “sympy/core/evalf.py”, line 1292, in evalf
xe = x._eval_evalf(prec)
File “sympy/polys/rootoftools.py”, line 644, in _eval_evalf
x0 = mpc(*map(str, interval.center))
File “/usr/lib/python2.7/site-packages/mpmath/ctx_mp_python.py”, line 374, in new
imag = cls.context.mpf(imag)
File “/usr/lib/python2.7/site-packages/mpmath/ctx_mp_python.py”, line 77, in new
v._mpf_ = mpf_pos(cls.mpf_convert_arg(val, prec, rounding), prec, rounding)
File “/usr/lib/python2.7/site-packages/mpmath/ctx_mp_python.py”, line 84, in mpf_convert_arg
if isinstance(x, basestring): return from_str(x, prec, rounding)
File “/usr/lib/python2.7/site-packages/mpmath/libmp/libmpf.py”, line 1300, in from_str
return from_rational(int(p), int(q), prec, rnd)
ValueError: invalid literal for int() with base 10: ‘-2163048125L’
tests finished: 6841 passed, 185 skipped, 1 exceptions, in 4352.49 seconds
DO *NOT* COMMIT!
test process starts
executable: /usr/bin/python2 (2.7.14-final-0) [CPython]
architecture: 32-bit
cache: yes
ground types: gmpy 2.0.8
hash randomization: on (PYTHONHASHSEED=3003103148)
Closed by Andreas Baumann
02.10.2019 19:15
Reason for closing: Fixed
Additional comments about closing:
Seems to run the tests just fine on i686 and pentium4.
Google Cache
Bing Cache
|
|
13 | Packages | Bug Report | Medium | Low | [fox-devel] fails on 32-bit Intel - Arch Linux | Closed | |
Task Description
16.11.2017 - It’s the development version of the FOX toolkit. Breaks in some int/FXival/void * abstractions: FXWSQueue.cpp: In member function ‘FX::FXbool …
|
|
14 | Packages | Bug Report | Medium | Low | [ghc-mod] Needs rebuilt | Closed | |
Task Description
Attached to Project: Archlinux32
Opened by Luke Shumaker - 21.11.2017
Last edited by Erich Eckner - 25.11.2017
FS#14 - [ghc-mod] Needs rebuilt
Yesterday, I mentioned on IRC that many haskell packages need rebuilt. In response, deep42thought moved a bunch of packages from staging to stable, and told me to open a bug report if the issue persisted.
For the most part, this seems resolved. Some pacman -Qo/-Ql/ldd/grep magic tells me that all of the haskell packages I have are fine, except for [ghc-mod].
Closed by Erich Eckner
25.11.2017 14:58
Reason for closing: Fixed
Additional comments about closing:
removed - upstream removed it, too
Comments (1)
Related Tasks (0/0)
Luke Shumaker commented on 23.11.2017 04:47
deep42thought has removed ghc-mod, reflecting its removal in Arch. Requesting closure.
Google Cache
|
|
15 | Packages: Stable | Bug Report | Medium | Low | [extra/m17n-lib] needs rebuilt for icu 60 | Closed | |
Task Description
Attached to Project: Archlinux32
Opened by Luke Shumaker - 22.11.2017
Last edited by Erich Eckner - 28.11.2017
FS#15 - [extra/m17n-lib] needs rebuilt for icu 60
extra/m17n-lib 1.7.0-1 is built against icu 59; it needs rebuilt against icu 60 (which moved from staging to stable on Monday).
Closed by Erich Eckner
28.11.2017 08:14
Reason for closing: Fixed
Additional comments about closing:
unfortunately, the fixed package has same version - so you need to force update that one.
Comments (1)
Related Tasks (0/0)
Admin
Andreas Baumann commented on 23.11.2017 09:55
I checked on stable, seems ok to me now:
ldd /usr/lib/libm17n.so.0.4.1
linux-gate.so.1 (0xb7f9c000)
libm17n-core.so.0 => /usr/lib/libm17n-core.so.0 (0xb7f12000)
libdl.so.2 => /usr/lib/libdl.so.2 (0xb7f0d000)
libc.so.6 => /usr/lib/libc.so.6 (0xb7d37000)
libxml2.so.2 => /usr/lib/libxml2.so.2 (0xb7bb7000)
libz.so.1 => /usr/lib/libz.so.1 (0xb7b9e000)
liblzma.so.5 => /usr/lib/liblzma.so.5 (0xb7b72000)
libicui18n.so.60 => /usr/lib/libicui18n.so.60 (0xb78bc000)
libicuuc.so.60 => /usr/lib/libicuuc.so.60 (0xb7702000)
libicudata.so.60 => /usr/lib/libicudata.so.60 (0xb5d6c000)
libm.so.6 => /usr/lib/libm.so.6 (0xb5c70000)
/usr/lib/ld-linux.so.2 (0xb7f9e000)
libpthread.so.0 => /usr/lib/libpthread.so.0 (0xb5c4f000)
libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xb5ad5000)
libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0xb5ab8000)
Google Cache
|
|
16 | Packages | Bug Report | Medium | Low | [libreoffice-still] still using icu 59 - Arch Linux | Closed | |
Task Description
FS#16 : [libreoffice-still] still using icu 59 - Arch Linux
28.11.2017 - /usr/lib/libreoffice/program/soffice.bin: error while loading shared libraries: libicuuc.so.59: cannot open shared object file: No such file or …
|
|
17 | Packages | Bug Report | Medium | Low | nvidia and nvidia-lts kernel module build failure on 32 ... | Closed | |
Task Description
26.11.2017 - In file included from ./arch/x86/include/asm/page.h:75:0, from ./arch/x86/include/asm/thread_info.h:11, from ./include/linux/thread_info.h:37, …
|
|
18 | Packages | Bug Report | Medium | Low | [android-tools] missing a -latomic when linking adb .. | Closed | |
Task Description
08.12.2017 - FS#18 - [android-tools] missing a -latomic when linking adb (and maybe other utilities). Didn’t find the place where to report this upstream!?
|
|
19 | Packages | Bug Report | Medium | Low | unknown bug FS#19 | Closed | |
Task Description
no task description |
|
21 | Packages | Bug Report | Medium | Low | [ceph] unit tests failing or segfault | Closed | |
Task Description
Attached to Project: Archlinux32
Opened by Andreas Baumann - 13.12.2017
Last edited by Erich Eckner - 03.01.2018
FS#21 - [ceph] unit tests failing or segfault
5/142 Test #3: test_objectstore_memstore.sh ............***Failed 1.13 sec
7/142 Test #1: run-rbd-unit-tests.sh ...................***Failed 1.49 sec
46/142 Test #57: unittest_util ………………………*Failed 0.05 sec
51/142 Test #59: unittest_lru ……………………….*Failed 0.57 sec
92/142 Test #100: unittest_erasure_code_shec_arguments ….*Failed 0.63 sec
96/142 Test #102: unittest_journal ……………………*Exception: SegFault 0.90 sec
98/142 Test #106: unittest_mds_sessionfilter …………..*Exception: SegFault 1.02 sec
106/142 Test #116: unittest_bluefs …………………….*Exception: SegFault 0.66 sec
107/142 Test #117: unittest_bluestore_types …………….*Exception: SegFault 1.25 sec
108/142 Test #119: unittest_memstore_clone ……………..*Exception: SegFault 2.51 sec
114/142 Test #124: unittest_osdscrub …………………..*Exception: SegFault 0.63 sec
115/142 Test #125: unittest_pglog ……………………..*Exception: SegFault 1.23 sec
116/142 Test #126: unittest_hitset …………………….*Failed 0.52 sec
125/142 Test #134: test_ceph_argparse.py ……………….*Failed 1.64 sec
130/142 Test #6: run-tox-ceph-disk …………………..*Failed 94.75 sec
132/142 Test #142: unittest_rbd_mirror …………………*Exception: SegFault 0.51 sec
140/142 Test #2: run-cli-tests ………………………*Failed 167.72 sec
141/142 Test #110: mgr-dashboard-smoke.sh ………………*Failed 301.60 sec
Closed by Erich Eckner
03.01.2018 21:15
Reason for closing: Won’t fix
Additional comments about closing:
blacklisted ceph
Comments (9)
Admin
Erich Eckner commented on 17.12.2017 19:11
I’ll build it w/o check(), but we should definitely look into this (later)
Admin
Andreas Baumann commented on 19.12.2017 12:09
ceph goes heavy non-i686:
shell#> cmake ….
Error at cmake/modules/BuildDPDK.cmake:61 (message):
not able to build DPDK support: unsupported target.
"i686-native-linuxapp-gcc" not listed in
Call Stack (most recent call first):
cmake/modules/BuildDPDK.cmake:83 (do_build_dpdk)
cmake/modules/BuildSPDK.cmake:4 (build_dpdk)
CMakeLists.txt:239 (build_spdk)
I suspect libvirt and the other packages can use ceph, but do not require it
really. I would make ceph an optdepend.
Admin
Andreas Baumann commented on 19.12.2017 12:10
Using it without check is no option IMHO.
Admin
Andreas Baumann commented on 03.01.2018 19:29
New try, same bugs:
1 - run-rbd-unit-tests.sh (Failed)
2 - run-cli-tests (Failed)
3 - test_objectstore_memstore.sh (Failed)
59 - unittest_lru (Failed)
100 - unittest_erasure_code_shec_arguments (Failed)
102 - unittest_journal (SEGFAULT)
106 - unittest_mds_sessionfilter (SEGFAULT)
116 - unittest_bluefs (SEGFAULT)
117 - unittest_bluestore_types (SEGFAULT)
119 - unittest_memstore_clone (SEGFAULT)
124 - unittest_osdscrub (SEGFAULT)
125 - unittest_pglog (SEGFAULT)
126 - unittest_hitset (Failed)
134 - test_ceph_argparse.py (Failed)
142 - unittest_rbd_mirror (SEGFAULT)
Decision: remove ceph dependency on libvirt (more?), then blacklist the package.
Reason: we cannot maintain all software for companies upstream.
Admin
Andreas Baumann commented on 03.01.2018 19:45
mmh, a (most likely incomplete) list of software using ceph:
- libvirt: seems to be an optional storage method
- qemu: obvious, if used in combination with libvirt to store the disk image with ceph
- pifpaf: “Suite of tools and fixtures to manage daemons for testing”, ceph used in tests only
- fio: “Scriptable I/O tool for storage benchmarks and drive testing”, ceph seems to be optional
So, all seem to work fine without ceph.
Admin
Andreas Baumann commented on 03.01.2018 19:53
ceph on gihub: a project with pull requests only and no bug reports.. ok then.
Admin
Erich Eckner commented on 03.01.2018 20:59
agreed: I’ll blacklist it, once I compiled a list of ceph dependent packages.
Admin
Erich Eckner commented on 03.01.2018 21:04
I only see libvirt, python-pifpaf and qemu depending on ceph
Admin
Erich Eckner commented on 03.01.2018 21:07
ah, that’s because you already removed the dependencies
Google Cache
Bing Cache
|
|
22 | Packages: Build-list | Bug Report | Medium | Low | [firefox-developer-edition] build fails with out of mem ... | Closed | |
Task Description
Attached to Project: Archlinux32
Opened by Andreas Baumann - 16.12.2017
Last edited by Erich Eckner - 17.12.2017
FS#22 - [firefox-developer-edition] build fails with out of memory when using rust
49:50.05 note: rustc 1.22.1 running on i686-unknown-linux-gnu
49:50.05
49:50.05 note: run with `RUST_BACKTRACE=1` for a backtrace
49:50.05
49:50.05 thread ‘rustc’ panicked at ‘called `Result::unwrap()` on an `Err` value: Error { repr: Custom(Custom { kind: Other, error: StringError(”Cannot allocate memory”) }) }’, src/libcore/result.rs:906:4
49:50.05 stack backtrace:
49:50.05 0: 0xf7caf5ea - rust_metadata_std_a60a98c24b539dcf2508f3d395979a97
49:50.05 1: 0xf7caa43e - rust_metadata_std_a60a98c24b539dcf2508f3d395979a97
49:50.05 2: 0xf7cbb31c - rust_metadata_std_a60a98c24b539dcf2508f3d395979a97
49:50.05 3: 0xf7cbb051 - rust_metadata_std_a60a98c24b539dcf2508f3d395979a97
49:50.05 4: 0xf7cbb82b - std::panicking::rust_panic_with_hook::h269fa2b74a2a0cee
49:50.05 5: 0xf7cbb6f6 - rust_metadata_std_a60a98c24b539dcf2508f3d395979a97
49:50.05 6: 0xf7cbb616 - std::panicking::begin_panic_fmt::hfe3f4b4d254fe489
49:50.05 7: 0xf7cbb57d - rust_begin_unwind
49:50.05 8: 0xf7d10dd6 - core::panicking::panic_fmt::h39c7136c9dc224e1
49:50.05 9: 0xf791f50a - rust_metadata_rustc_trans_73f1dcf221d7505426c13ccaa7d81bf3
49:50.05 10: 0xf79558dc - rust_metadata_rustc_trans_73f1dcf221d7505426c13ccaa7d81bf3
49:50.05 11: 0xf794f7e6 - rustc_trans::back::link::each_linked_rlib::h1e799094f6b686fb
49:50.05 12: 0xf794ff56 - rust_metadata_rustc_trans_73f1dcf221d7505426c13ccaa7d81bf3
49:50.05 13: 0xf794f19b - rustc_trans::back::link::link_binary::ha97335099e542ac0
49:50.06 14: 0xf79f455e - ::link_binary::h62e43ed882d32b44
49:50.06 15: 0xf7e686c5 - rustc_driver::driver::compile_input::hfa914359aa3118bb
49:50.06 16: 0xf7e82a2a - rustc_driver::run_compiler::hcd191a8815d2728b
49:50.06 17: 0xf7d9cc8f - rust_metadata_rustc_driver_e8ab70a79951e31413d2f7ce5f23c51c
49:50.06 18: 0xf7cc5542 - rust_maybe_catch_panic
49:50.06 19: 0xf7dd6891 -
49:50.06 20: 0xf7cba2db - rust_metadata_std_a60a98c24b539dcf2508f3d395979a97
49:50.06 21: 0xf622ee55 - start_thread
49:50.06 22: 0xf7b6dd05 - clone
49:50.06 23: 0×0 -
49:50.06
49:50.23 error: Could not compile `gkrust`.
49:50.23
49:50.23 To learn more, run the command again with –verbose.
49:50.24 make[4]: * [/build/firefox-developer-edition/src/mozilla-unified/config/rules.mk:953: force-cargo-library-build] Error 101
49:50.24 make[3]: * [/build/firefox-developer-edition/src/mozilla-unified/config/recurse.mk:73: toolkit/library/rust/target] Error 2
49:50.24 make[2]: * [/build/firefox-developer-edition/src/mozilla-unified/config/recurse.mk:33: compile] Error 2
49:50.24 make[1]: * [/build/firefox-developer-edition/src/mozilla-unified/config/rules.mk:432: default] Error 2
49:50.24 make: *** [client.mk:274: build] Error 2
49:50.28 635 compiler warnings present.
49:50.44 Notification center failed: Install notify-send (usually part of the libnotify package) to get a notification when the build finishes.
==> ERROR: A failure occurred in build().
Aborting...
==> ERROR: Build failed, check /var/lib/archbuild/staging-with-build-support-i686/erich/build
Closed by Erich Eckner
17.12.2017 19:10
Reason for closing: Not a bug
Comments (0)
Google Cache
|
|
23 | Packages: Build-list | Bug Report | Medium | Low | libretro* packages failing, seem unsupported for 32-bit ... | Closed | |
Task Description
Attached to Project: Archlinux32
Opened by Andreas Baumann - 04.01.2018
Last edited by Erich Eckner - 26.01.2018
FS#23 - libretro* packages failing, seem unsupported for 32-bit Intel/Linux
This affects the following packages:
- libretro-citra (unsuported architecture in dynarmic submodule)
- libretro-parallel-n64: tons of assembly errors
- libretro-ppsspp: linking issues with ffmpeg
- libretro-mupen64plus: direct GOT relocation R_386_GOT32X against _ZN9PluginAPI3getEv PluginAPI::get()
blacklisting all.
Closed by Erich Eckner
26.01.2018 17:08
Reason for closing: Won’t fix
Additional comments about closing:
blacklisted
Comments (0)
Google Cache
|
|
24 | Packages | Bug Report | Medium | Low | [extra/viewnior] Needs rebuild against exiv2=0.26 | Closed | |
Task Description
I scheduled a rebuild of viewnior, let me know if viewnior 1.6-3.1 works.
|
|
25 | Packages | Bug Report | Medium | Low | unknown bug FS#25 | Closed | |
Task Description
no task description |
|
26 | Packages | Bug Report | Medium | Low | [texlive] partially linked against old libmpfr | Closed | |
Task Description
Attached to Project: Archlinux32
Opened by Andreas Baumann - 02.02.2018
Last edited by Andreas Baumann - 02.02.2018
FS#26 - [texlive] partially linked against old libmpfr
( 9/18) Updating TeXLive filename database… texlua: error while loading shared libraries: libmpfr.so.4: cannot open shared object file: No such file or directory
Triggered a forced rebuild of textlive-core and texlive-bin.
Closed by Andreas Baumann
02.02.2018 10:15
Reason for closing: Fixed
Comments (0)
Google Cache
|
