|
242 | Packages | Bug Report | Medium | Low | [flac] fails to build | Closed | |
Task Description
This is just the sad state of what people do to working software:
if(CMAKE_SYSTEM_PROCESSOR STREQUAL "i686" AND HAVE_STACKREALIGN_FLAG)
add_compile_options(-mstackrealign)
endif()
which results in nasm to fail with “unknown option -m”
a) they rewrite half of the build system without apparently understanding fully the autoconf part b) they don’t bother to delete to autoconf part c) they write code for porting the software apparenty without testing (why bother then in the first place?)
|
|
22 | Packages: Build-list | Bug Report | Medium | Low | [firefox-developer-edition] build fails with out of mem ... | Closed | |
Task Description
Attached to Project: Archlinux32 Opened by Andreas Baumann - 16.12.2017 Last edited by Erich Eckner - 17.12.2017
FS#22 - [firefox-developer-edition] build fails with out of memory when using rust
49:50.05 note: rustc 1.22.1 running on i686-unknown-linux-gnu 49:50.05 49:50.05 note: run with `RUST_BACKTRACE=1` for a backtrace 49:50.05 49:50.05 thread ‘rustc’ panicked at ‘called `Result::unwrap()` on an `Err` value: Error { repr: Custom(Custom { kind: Other, error: StringError(”Cannot allocate memory”) }) }’, src/libcore/result.rs:906:4 49:50.05 stack backtrace: 49:50.05 0: 0xf7caf5ea - rust_metadata_std_a60a98c24b539dcf2508f3d395979a97 49:50.05 1: 0xf7caa43e - rust_metadata_std_a60a98c24b539dcf2508f3d395979a97 49:50.05 2: 0xf7cbb31c - rust_metadata_std_a60a98c24b539dcf2508f3d395979a97 49:50.05 3: 0xf7cbb051 - rust_metadata_std_a60a98c24b539dcf2508f3d395979a97 49:50.05 4: 0xf7cbb82b - std::panicking::rust_panic_with_hook::h269fa2b74a2a0cee 49:50.05 5: 0xf7cbb6f6 - rust_metadata_std_a60a98c24b539dcf2508f3d395979a97 49:50.05 6: 0xf7cbb616 - std::panicking::begin_panic_fmt::hfe3f4b4d254fe489 49:50.05 7: 0xf7cbb57d - rust_begin_unwind 49:50.05 8: 0xf7d10dd6 - core::panicking::panic_fmt::h39c7136c9dc224e1 49:50.05 9: 0xf791f50a - rust_metadata_rustc_trans_73f1dcf221d7505426c13ccaa7d81bf3 49:50.05 10: 0xf79558dc - rust_metadata_rustc_trans_73f1dcf221d7505426c13ccaa7d81bf3 49:50.05 11: 0xf794f7e6 - rustc_trans::back::link::each_linked_rlib::h1e799094f6b686fb 49:50.05 12: 0xf794ff56 - rust_metadata_rustc_trans_73f1dcf221d7505426c13ccaa7d81bf3 49:50.05 13: 0xf794f19b - rustc_trans::back::link::link_binary::ha97335099e542ac0 49:50.06 14: 0xf79f455e - ::link_binary::h62e43ed882d32b44 49:50.06 15: 0xf7e686c5 - rustc_driver::driver::compile_input::hfa914359aa3118bb 49:50.06 16: 0xf7e82a2a - rustc_driver::run_compiler::hcd191a8815d2728b 49:50.06 17: 0xf7d9cc8f - rust_metadata_rustc_driver_e8ab70a79951e31413d2f7ce5f23c51c 49:50.06 18: 0xf7cc5542 - rust_maybe_catch_panic 49:50.06 19: 0xf7dd6891 - 49:50.06 20: 0xf7cba2db - rust_metadata_std_a60a98c24b539dcf2508f3d395979a97 49:50.06 21: 0xf622ee55 - start_thread 49:50.06 22: 0xf7b6dd05 - clone 49:50.06 23: 0×0 - 49:50.06 49:50.23 error: Could not compile `gkrust`. 49:50.23 49:50.23 To learn more, run the command again with –verbose. 49:50.24 make[4]: * [/build/firefox-developer-edition/src/mozilla-unified/config/rules.mk:953: force-cargo-library-build] Error 101 49:50.24 make[3]: * [/build/firefox-developer-edition/src/mozilla-unified/config/recurse.mk:73: toolkit/library/rust/target] Error 2 49:50.24 make[2]: * [/build/firefox-developer-edition/src/mozilla-unified/config/recurse.mk:33: compile] Error 2 49:50.24 make[1]: * [/build/firefox-developer-edition/src/mozilla-unified/config/rules.mk:432: default] Error 2 49:50.24 make: *** [client.mk:274: build] Error 2 49:50.28 635 compiler warnings present. 49:50.44 Notification center failed: Install notify-send (usually part of the libnotify package) to get a notification when the build finishes. ==> ERROR: A failure occurred in build().
Aborting...
==> ERROR: Build failed, check /var/lib/archbuild/staging-with-build-support-i686/erich/build
Closed by Erich Eckner 17.12.2017 19:10 Reason for closing: Not a bug
Comments (0)
Google Cache
|
|
3 | Packages: Stable | Bug Report | Medium | Low | [ffmpeg] missing FLAC codec | Closed | |
Task Description
Opened by Andreas Baumann - 07.11.2017 Last edited by Erich Eckner - 07.11.2017
FS#3 - [ffmpeg] missing FLAC codec
Playing 10.Motion_Picture_Soundtrack.flac. Audio only file format detected. Load subtitles in ./
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders [flac @ 0xb68902c0]Got unexpected packet size after a partial decode [flac @ 0xb68902c0]Got unexpected packet size after a partial decode [flac @ 0xb68902c0]Got unexpected packet size after a partial decode [flac @ 0xb68902c0]Got unexpected packet size after a partial decode [flac @ 0xb68902c0]Got unexpected packet size after a partial decode [flac @ 0xb68902c0]Got unexpected packet size after a partial decode ADecoder init failed sad ADecoder init failed sad Cannot find codec for audio format 0x43614C66. Audio: no sound Video: no video
Levi commented on 16.05.2019 20:08
How do I check this? I tested inputting a file to ffmpeg using the -i option and it acted like the output of ffprobe reporting things like the duration correctly before barfing that I hadn’t supplied it with any outputs. Is this fixed therefore? Admin Andreas Baumann commented on 17.08.2019 12:23
Output #0, flac, to ‘Kid A (2000)/10.Motion_Picture_Soundtrack.flac’: Output file #0 does not contain any stream
and this on 64-bit.
I don’t think, flac support is there in ffmpeg
Google Cache
Bing Cache
|
|
311 | Packages | Bug Report | Medium | Low | [ffmpeg] fails with SIGILL on i686 | Assigned | |
Task Description
work fine on pentium4
reproducable: ffplay <file.mp4>
offending opcode:
0xb5f315e7: f3 0f 10 83 d0 0b 00 00 movss
0xbd0(%ebx),%xmm0
|
|
239 | Packages | Bug Report | Medium | Low | [ffmpeg] and [ffmepg4.4] fail to build | Closed | |
Task Description
libswscale/x86/rgb2rgb_template.c: In function ‘interleaveBytes_sse2’:
libswscale/x86/rgb2rgb_template.c:1838:9: error: the register ‘xmm2’ cannot be clobbered in ‘asm’ for the current target
1838 | __asm__(
| ^
Also on i486 symbols are missing if not using LTO and probing of libraries like x264/x265 fail.
|
|
9 | Packages: Build-list | Bug Report | Medium | Low | [ffmpeg] [ffmpeg2.8] libtheora not found | Closed | |
Task Description
Attached to Project: Archlinux32 Opened by Erich Eckner - 11.11.2017 Last edited by Andreas Baumann - 12.11.2017
FS#9 - [ffmpeg] [ffmpeg2.8] libtheora not found
==> Starting build()… ERROR: libtheora not found
… but it’s there: /var/lib/archbuild/staging-i686/erich/usr/lib/libtheora.so.0.3.10 /var/lib/archbuild/staging-i686/erich/usr/lib/libtheora.so.0 /var/lib/archbuild/staging-i686/erich/usr/lib/libtheora.so
strange … Closed by Andreas Baumann 12.11.2017 15:40 Reason for closing: Fixed Additional comments about closing:
fixed in libogg.
Comments (5)
Related Tasks (0/0)
Admin Andreas Baumann commented on 12.11.2017 14:29
more ffbuild/config.log
BEGIN /tmp/ffconf.6IlfdMzU/test.c
1 #include
2 #include
3 long check_th_info_init(void) { return (long) th_info_init; }
4 int main(void) { int ret = 0;
5 ret |= ((intptr_t)check_th_info_init) & 0xFFFF;
6 return ret; }
END /tmp/ffconf.6IlfdMzU/test.c gcc -D_ISOC99_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_POSIX_C_SOURCE=200112 -D_XOPEN_SOURCE= 600 -DPIC -std=c11 -fomit-frame-pointer -fPIC -pthread -I/usr/include/p11-kit-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/us r/include/fribidi -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include /glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/har / …skipping In file included from /usr/include/ogg/os_types.h:144:0,
from /usr/include/ogg/ogg.h:25,
from /usr/include/theora/theoraenc.h:24,
from /tmp/ffconf.6IlfdMzU/test.c:1:
/usr/include/ogg/config_types.h:4:10: fatal error: config_types-32.h: No such file or directory #include “config_types-32.h”
^~~~~~~~~~~~~~~~~~~
compilation terminated. ERROR: libtheora not found
Admin Andreas Baumann commented on 12.11.2017 14:31
/usr/include/ogg/config_types.h
#if WORDSIZE == 32 #include “config_types-32.h”
#elif WORDSIZE == 64 #include “config_types-64.h” #else #error “Unknown word size” #endif
ls /usr/include/ogg/ config_types-64.h config_types.h ogg.h os_types.h
So ogg misses the 32-bit types header file.. I’ll check there.. Admin Andreas Baumann commented on 12.11.2017 14:54
Trying a patch in libogg:
sed
s|mv "${pkgdir}"/usr/include/ogg/config_types{,-64}.h|mv "${pkgdir}"/usr/include/ogg/config_types{,-32}.h|
Admin Andreas Baumann commented on 12.11.2017 14:57
acutally: better remove the whole multilib stuff on 32-bit.. Admin Andreas Baumann commented on 12.11.2017 15:39
eval “$(
declare -f package | \
sed '
/^.*Resolve multilib conflict/,/^}$/{//p;d;}
'
)”
Back to first version, I’m not a sed-king (rather the very opposite).
Google Cache
|
|
41 | Packages | Bug Report | Medium | Low | [extra/vlc] is uninstallable because [extra/ffmpeg2.8] ... | Closed | |
Task Description
Attached to Project: Archlinux32 Opened by Luke Shumaker - 13.06.2018 Last edited by Erich Eckner - 28.06.2018
FS#41 - [extra/vlc] is uninstallable because [extra/ffmpeg2.8] was removed
[extra/ffmpeg2.8] (which provided ffmpeg=2.8; [extra/ffmpeg] is 3.4) was removed, despite that it was still needed by [extra/vlc].
[extra/vlc] is an old version (2.2); the current version (3.0), which no longer depends on ffmpeg2.8, is currently in [testing].
(I am unsure if [testing/vlc] depends on extra/ffmpeg=3.4 or testing/ffmpeg=4.0) Closed by Erich Eckner 28.06.2018 20:25 Reason for closing: Fixed
Comments (3)
Related Tasks (0/0)
Admin Tyzoid commented on 13.06.2018 21:39
Checking https://packages.archlinux32.org/extra/i686/vlc/ vs https://packages.archlinux32.org/testing/i686/vlc/, it appears that the extra/ffmpeg satisfies the testing/vlc requirements.
Here’s from vlc in testing: libavcodec.so.58 (ffmpeg) libavformat.so.58 (ffmpeg) libavutil.so.56 (ffmpeg)
vs vlc in extra: not satisfiable dependency: “libavcodec.so.56” not satisfiable dependency: “libavformat.so.56” not satisfiable dependency: “libavutil.so.54” Admin Erich Eckner commented on 18.06.2018 09:37
vlc 3.0.3 is now in extra Admin Andreas Baumann commented on 21.06.2018 11:36
vlc 3.0.3 works fine on testing.
Google Cache
|
|
24 | Packages | Bug Report | Medium | Low | [extra/viewnior] Needs rebuild against exiv2=0.26 | Closed | |
Task Description
I scheduled a rebuild of viewnior, let me know if viewnior 1.6-3.1 works.
|
|
15 | Packages: Stable | Bug Report | Medium | Low | [extra/m17n-lib] needs rebuilt for icu 60 | Closed | |
Task Description
Attached to Project: Archlinux32 Opened by Luke Shumaker - 22.11.2017 Last edited by Erich Eckner - 28.11.2017
FS#15 - [extra/m17n-lib] needs rebuilt for icu 60
extra/m17n-lib 1.7.0-1 is built against icu 59; it needs rebuilt against icu 60 (which moved from staging to stable on Monday). Closed by Erich Eckner 28.11.2017 08:14 Reason for closing: Fixed Additional comments about closing:
unfortunately, the fixed package has same version - so you need to force update that one.
Comments (1)
Related Tasks (0/0)
Admin Andreas Baumann commented on 23.11.2017 09:55
I checked on stable, seems ok to me now:
ldd /usr/lib/libm17n.so.0.4.1
linux-gate.so.1 (0xb7f9c000)
libm17n-core.so.0 => /usr/lib/libm17n-core.so.0 (0xb7f12000)
libdl.so.2 => /usr/lib/libdl.so.2 (0xb7f0d000)
libc.so.6 => /usr/lib/libc.so.6 (0xb7d37000)
libxml2.so.2 => /usr/lib/libxml2.so.2 (0xb7bb7000)
libz.so.1 => /usr/lib/libz.so.1 (0xb7b9e000)
liblzma.so.5 => /usr/lib/liblzma.so.5 (0xb7b72000)
libicui18n.so.60 => /usr/lib/libicui18n.so.60 (0xb78bc000)
libicuuc.so.60 => /usr/lib/libicuuc.so.60 (0xb7702000)
libicudata.so.60 => /usr/lib/libicudata.so.60 (0xb5d6c000)
libm.so.6 => /usr/lib/libm.so.6 (0xb5c70000)
/usr/lib/ld-linux.so.2 (0xb7f9e000)
libpthread.so.0 => /usr/lib/libpthread.so.0 (0xb5c4f000)
libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xb5ad5000)
libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0xb5ab8000)
Google Cache
|
|
40 | Packages: Stable | Bug Report | Medium | Low | [extra/gimp] is uninstallable because [extra/gegl02 ... | Closed | |
Task Description
20.06.2018 - [extra/gegl02] (which provided gegl=0.2; [extra/gegl] is 0.3) was removed, despite that it was still needed by [extra/gimp]. [extra/gimp] is an old …
|
|
277 | Packages | Bug Report | Medium | Low | [emacs] rebuild fails on 486, needs librsvg | Closed | |
Task Description
/usr/src/debug/emacs-28.1/src/image.c:10009: undefined reference to `rsvg_handle_set_stylesheet’ # /usr/bin/ld: /usr/src/debug/emacs-28.1/src/image.c:10196: undefined reference to `rsvg_handle_set_stylesheet’
|
|
252 | Packages | Bug Report | Medium | Low | [dbus-python/python-dbus] mixup | New | |
Task Description
packages (like upower) which include a dependency on python-dbus use a 3.9 version and miss the correct one dbus-python (which replaces python-dbus). This will only solve itself when upstream adapts the PKGBUILDs to this name change.
|
|
258 | Packages | Bug Report | Medium | Low | [clang] fails to build on i486 | Closed | |
Task Description
/usr/bin/c++ -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -D_LARGEFILE_SOURCE -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS -D__STDC_LIMIT_MACROS -I/build/clang/src/clang-13.0.1.src/build/unittests/Tooling -I/build/clang/src/clang-13.0.1.src/unittests/Tooling -I/build/clang/src/clang-13.0.1.src/include -I/build/clang/src/clang-13.0.1.src/build/include -I/build/clang/src/llvm-13.0.1.src/utils/unittest/googletest/include -I/build/clang/src/llvm-13.0.1.src/utils/unittest/googlemock/include -march=i486 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -Wp,-D_GLIBCXX_ASSERTIONS -fPIC -fno-semantic-interposition -fvisibility-inlines-hidden -Werror=date-time -Wall -Wextra -Wno-unused-parameter -Wwrite-strings -Wcast-qual -Wno-missing-field-initializers -Wimplicit-fallthrough -Wno-class-memaccess -Wno-redundant-move -Wno-pessimizing-move -Wno-noexcept-type -Wdelete-non-virtual-dtor -Wsuggest-override -Wno-comment -Wmisleading-indentation -fdiagnostics-color -ffunction-sections -fdata-sections -fno-common -Woverloaded-virtual -fno-strict-aliasing -pedantic -Wno-long-long -O3 -DNDEBUG -fno-exceptions -Wno-suggest-override -std=c++14 -MD -MT unittests/Tooling/CMakeFiles/ToolingTests.dir/RecursiveASTVisitorTests/CallbacksLeaf.cpp.o -MF unittests/Tooling/CMakeFiles/ToolingTests.dir/RecursiveASTVisitorTests/CallbacksLeaf.cpp.o.d -o unittests/Tooling/CMakeFiles/ToolingTests.dir/RecursiveASTVisitorTests/CallbacksLeaf.cpp.o -c /build/clang/src/clang-13.0.1.src/unittests/Tooling/RecursiveASTVisitorTests/CallbacksLeaf.cpp
{standard input}: Assembler messages:
{standard input}: Error: open CFI at the end of file; missing .cfi_endproc directive
c++: fatal error: Killed signal terminated program cc1plus
compilation terminated.
We can ommit the tests..
Also lto is not good (breaks early) and you need lots of memory and swap to build it.
|
|
21 | Packages | Bug Report | Medium | Low | [ceph] unit tests failing or segfault | Closed | |
Task Description
Attached to Project: Archlinux32 Opened by Andreas Baumann - 13.12.2017 Last edited by Erich Eckner - 03.01.2018
FS#21 - [ceph] unit tests failing or segfault
5/142 Test #3: test_objectstore_memstore.sh ............***Failed 1.13 sec
7/142 Test #1: run-rbd-unit-tests.sh ...................***Failed 1.49 sec
46/142 Test #57: unittest_util ………………………*Failed 0.05 sec 51/142 Test #59: unittest_lru ……………………….*Failed 0.57 sec 92/142 Test #100: unittest_erasure_code_shec_arguments ….*Failed 0.63 sec 96/142 Test #102: unittest_journal ……………………*Exception: SegFault 0.90 sec 98/142 Test #106: unittest_mds_sessionfilter …………..*Exception: SegFault 1.02 sec 106/142 Test #116: unittest_bluefs …………………….*Exception: SegFault 0.66 sec 107/142 Test #117: unittest_bluestore_types …………….*Exception: SegFault 1.25 sec 108/142 Test #119: unittest_memstore_clone ……………..*Exception: SegFault 2.51 sec 114/142 Test #124: unittest_osdscrub …………………..*Exception: SegFault 0.63 sec 115/142 Test #125: unittest_pglog ……………………..*Exception: SegFault 1.23 sec 116/142 Test #126: unittest_hitset …………………….*Failed 0.52 sec 125/142 Test #134: test_ceph_argparse.py ……………….*Failed 1.64 sec 130/142 Test #6: run-tox-ceph-disk …………………..*Failed 94.75 sec 132/142 Test #142: unittest_rbd_mirror …………………*Exception: SegFault 0.51 sec 140/142 Test #2: run-cli-tests ………………………*Failed 167.72 sec 141/142 Test #110: mgr-dashboard-smoke.sh ………………*Failed 301.60 sec
Closed by Erich Eckner 03.01.2018 21:15 Reason for closing: Won’t fix Additional comments about closing:
blacklisted ceph
Comments (9)
Admin Erich Eckner commented on 17.12.2017 19:11
I’ll build it w/o check(), but we should definitely look into this (later) Admin Andreas Baumann commented on 19.12.2017 12:09
ceph goes heavy non-i686:
shell#> cmake ….
Error at cmake/modules/BuildDPDK.cmake:61 (message):
not able to build DPDK support: unsupported target.
"i686-native-linuxapp-gcc" not listed in
Call Stack (most recent call first):
cmake/modules/BuildDPDK.cmake:83 (do_build_dpdk)
cmake/modules/BuildSPDK.cmake:4 (build_dpdk)
CMakeLists.txt:239 (build_spdk)
I suspect libvirt and the other packages can use ceph, but do not require it really. I would make ceph an optdepend. Admin Andreas Baumann commented on 19.12.2017 12:10
Using it without check is no option IMHO. Admin Andreas Baumann commented on 03.01.2018 19:29
New try, same bugs:
1 - run-rbd-unit-tests.sh (Failed)
2 - run-cli-tests (Failed)
3 - test_objectstore_memstore.sh (Failed)
59 - unittest_lru (Failed)
100 - unittest_erasure_code_shec_arguments (Failed)
102 - unittest_journal (SEGFAULT)
106 - unittest_mds_sessionfilter (SEGFAULT)
116 - unittest_bluefs (SEGFAULT)
117 - unittest_bluestore_types (SEGFAULT)
119 - unittest_memstore_clone (SEGFAULT)
124 - unittest_osdscrub (SEGFAULT)
125 - unittest_pglog (SEGFAULT)
126 - unittest_hitset (Failed)
134 - test_ceph_argparse.py (Failed)
142 - unittest_rbd_mirror (SEGFAULT)
Decision: remove ceph dependency on libvirt (more?), then blacklist the package.
Reason: we cannot maintain all software for companies upstream. Admin Andreas Baumann commented on 03.01.2018 19:45
mmh, a (most likely incomplete) list of software using ceph:
- libvirt: seems to be an optional storage method - qemu: obvious, if used in combination with libvirt to store the disk image with ceph - pifpaf: “Suite of tools and fixtures to manage daemons for testing”, ceph used in tests only - fio: “Scriptable I/O tool for storage benchmarks and drive testing”, ceph seems to be optional
So, all seem to work fine without ceph. Admin Andreas Baumann commented on 03.01.2018 19:53
ceph on gihub: a project with pull requests only and no bug reports.. ok then. Admin Erich Eckner commented on 03.01.2018 20:59
agreed: I’ll blacklist it, once I compiled a list of ceph dependent packages. Admin Erich Eckner commented on 03.01.2018 21:04
I only see libvirt, python-pifpaf and qemu depending on ceph Admin Erich Eckner commented on 03.01.2018 21:07
ah, that’s because you already removed the dependencies
Google Cache
Bing Cache
|
|
262 | Packages | Bug Report | Medium | Low | [ca-certificates] contains empty cert bundle | Closed | |
Task Description
-r--r--r-- 1 root root 0 May 12 07:00 /etc/ca-certificates/extracted/tls-ca-bundle.pem
curl -v https://www.openssl.org
* Trying 104.89.5.252:443...
* Connected to www.openssl.org (104.89.5.252) port 443 (#0)
* ALPN, offering h2
* ALPN, offering http/1.1
* error setting certificate verify locations: CAfile: /etc/ssl/certs/ca-certificates.crt CApath: none
* Closing connection 0
curl: (77) error setting certificate verify locations: CAfile: /etc/ssl/certs/ca-certificates.crt CApath: none
|
|
320 | Packages | Bug Report | Medium | Low | [btop] On i486 fails on clock_gettime64 | New | |
Task Description
shows a red ERROR: on startup, strace shows:
write(2, "\n", 1
) = 1
clock_gettime64(CLOCK_REALTIME, {tv_sec=1675495215, tv_nsec=436798535}) = 0
exit_group(1) = ?
+++ exited with 1 +++
[root@eurobuild6-7-i486 ~]# btop
ERROR: No UTF-8 locale detected!
|
|
246 | Packages | Bug Report | Medium | Low | [blender] doesn't work (and doesn't build) | New | |
Task Description
blender 2.93 has dependencies on wrong versions of - llvm (via openshadinglanguage) - boost (via openimageio)
Could NOT find PythonLibsUnix (missing: PYTHON_LIBRARY PYTHON_LIBPATH PYTHON_INCLUDE_DIR PYTHON_INCLUDE_CONFIG_DIR)’
blender 3.0.1: Haru not found, disabling WITH_HARU’ and ‘Cycles OSL requires WITH_LLVM, the library may not have been found. Configure LLVM or disable WITH_CYCLES_OSL
Let’s tackle one issue after the other.
|
|
261 | Packages | Bug Report | Medium | Low | [binutils] FTBFS | Closed | |
Task Description
/build/binutils/src/binutils-gdb/libiberty/fibheap.c: In function ‘fibheap_replace_key_data’:
/build/binutils/src/binutils-gdb/libiberty/fibheap.c:38:25: error: ‘LONG_MIN’ undeclared (first use in th
is function)
38 | #define FIBHEAPKEY_MIN LONG_MIN
| ^~~~~~~~
/build/binutils/src/binutils-gdb/libiberty/fibheap.c:220:30: note: in expansion of macro ‘FIBHEAPKEY_MIN’
220 | if (okey == key && okey != FIBHEAPKEY_MIN)
| ^~~~~~~~~~~~~~
/build/binutils/src/binutils-gdb/libiberty/fibheap.c:36:1: note: ‘LONG_MIN’ is defined in header ‘<limits.h>’; did you forget to ‘#include <limits.h>’?
35 | #include "fibheap.h"
+++ |+#include <limits.h>
Amazing code quality
|
|
18 | Packages | Bug Report | Medium | Low | [android-tools] missing a -latomic when linking adb .. | Closed | |
Task Description
08.12.2017 - FS#18 - [android-tools] missing a -latomic when linking adb (and maybe other utilities). Didn’t find the place where to report this upstream!?
|
|
107 | Packages | Bug Report | Very Low | Low | wireguard-dkms-0.0.20200318-1.0 does not build with 5.5 ... | Closed | |
Task Description
Installing wireguard-dkms fails with:
(2/2) Install DKMS modules
==> dkms install wireguard/0.0.20200318 -k 5.5.8-arch1-1.0
Error! Bad return status for module build on kernel: 5.5.8-arch1-1.0 (i686)
Consult /var/lib/dkms/wireguard/0.0.20200318/build/make.log for more information.
The file /var/lib/dkms/wireguard/0.0.20200318/build/make.log contains the following messages:
DKMS make.log for wireguard-0.0.20200318 for kernel 5.5.8-arch1-1.0 (i686)
Fri 03 Apr 2020 10:11:21 PM CEST
make: Entering directory '/usr/lib/modules/5.5.8-arch1-1.0/build'
AR /var/lib/dkms/wireguard/0.0.20200318/build/built-in.a
CC [M] /var/lib/dkms/wireguard/0.0.20200318/build/main.o
cc1: error: incompatible gcc/plugin versions
cc1: error: fail to initialize plugin ./scripts/gcc-plugins/structleak_plugin.so
make[1]: *** [scripts/Makefile.build:266: /var/lib/dkms/wireguard/0.0.20200318/build/main.o] Error 1
make: *** [Makefile:1693: /var/lib/dkms/wireguard/0.0.20200318/build] Error 2
make: Leaving directory '/usr/lib/modules/5.5.8-arch1-1.0/build'
|
|
117 | Packages | Bug Report | Very Low | Low | vboxdrive module missing | New | |
Task Description
vboxdrv module is missing making virtualbox unusable.
I’m currently running kernel 5.9.0-1.0-pae but it doesn’t seem to be there in any version
|
|
351 | Packages: Stable | Bug Report | Very Low | Medium | Various python-X packages building for Python 3.10 and ... | New | |
Task Description
yes, confirmed, that’s because python 3.11 is the only package building and being published to stable, the python modules need bootstrapping (since months).
|
|
244 | Packages | Bug Report | Very Low | Low | unable to satisfy dependency 'libx264.so=163-32' requir ... | Closed | |
Task Description
# pacman -Sy ffmpeg :: Synchronizing package databases… core is up to date extra is up to date community is up to date resolving dependencies… warning: cannot resolve “libx264.so=163-32”, a dependency of “ffmpeg” :: The following package cannot be upgraded due to unresolvable dependencies:
ffmpeg
|
|
279 | Packages: Stable | Bug Report | Very Low | Medium | Telegram Desktop doesn't start | Closed | |
Task Description
Telegram Desktop fails to start with an error about incompatible Qt libraries, I think it needs to be rebuilt.
|
|
173 | Packages | Bug Report | Very Low | Medium | supertux is broken (depends on libboostfilesystem 0.72 ... | Closed | |
Task Description
Supertux needs to be rebuilt as it currently depends on the wrong version of libboostfilesystem.
https://www.archlinux32.org/packages/i686/community/supertux/ not satisfiable dependency: “libboost_filesystem.so.1.72.0” (link) not satisfiable dependency: “libboost_locale.so.1.72.0” (link)
This affects all architectures (i686 and pentium4)
|
|
354 | Packages | Bug Report | Very Low | Low | staging mkinitcpio<->cryptsetup conflict | Closed | |
Task Description
it is not possible to enable staging
$ sudo pacman -Syuu
:: Synchronizing package databases...
core-staging is up to date
core is up to date
extra-staging 2.5 MiB 2.22 MiB/s 00:01 [##################################] 100%
extra is up to date
community-staging is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
:: There are 2 providers available for dbus-units:
:: Repository core-staging
1) dbus-broker-units 2) dbus-daemon-units
Enter a number (default=1):
looking for conflicting packages...
:: cryptsetup and mkinitcpio are in conflict. Remove mkinitcpio? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: unable to satisfy dependency 'initramfs' required by linux
|
|
199 | Packages | Bug Report | Very Low | Low | SPAM | Closed | |
Task Description
SPAM
|
|
200 | Packages | Bug Report | Very Low | Low | SPAM | Closed | |
Task Description
SPAM
|
|
201 | Packages | Bug Report | Very Low | Low | SPAM | Closed | |
Task Description
SPAM
|
|
202 | Packages | Bug Report | Very Low | Low | SPAM | Closed | |
Task Description
SPAM
|
|
203 | Packages | Bug Report | Very Low | Low | SPAM | Closed | |
Task Description
SPAM
|
|
205 | Packages | Bug Report | Very Low | Low | SPAM | Closed | |
Task Description
no task description |
|
206 | Packages | Bug Report | Very Low | Low | SPAM | Closed | |
Task Description
no task description |
|
229 | Packages | Bug Report | Very Low | Low | SPAM | Closed | |
Task Description
no task description |
|
179 | Packages: Stable | Bug Report | Very Low | Medium | Snapper needs rebuild from icu upgrade | Closed | |
Task Description
icu69.1-1.0 however snapper still links against libicuuc.so.68
Running snapper now gives the following error:
# snapper list /
snapper: error while loading shared libraries: libicuuc.so.68: cannot open shared object file: No such file or directory
|
|
118 | Packages | Bug Report | Very Low | Medium | signing key is expired | Closed | |
Task Description
When trying to install the package, packman complies about the the key to be of unknown trust. Cheking the keyring the associated key appers to be expired.
|
|
333 | Packages | Bug Report | Very Low | High | Sddm 0.19.0-9.0 crashes with Qt 5.15.9 | Assigned | |
Task Description
The current version of sddm (0.19.0-9.0) depends on the previous version of Qt (5.15.8). After updating Qt, sddm crashes with an incompatible Qt library error.
|
|
273 | Packages: Stable | Bug Report | Very Low | Medium | Quazip Qt5 package contains Qt6 libraries | Closed | |
Task Description
The quazip-qt5 package for both i686 and pentium4 contains the Qt6 libraries instead of the Qt5 ones.
The quazip package also no longer seems to exist upstream and should probably be removed in Arch32 as well.
|
|
323 | Packages | Bug Report | Very Low | Medium | qemu-desktop installation error | Closed | |
Task Description
While installing qemu-desktop for Archlinux32 following error appears:
/usr/bin/gtk-query-immodules-3.0: symbol lookup error: /usr/liblibpango-1.0.so.0: undefined symbol: hb_ot_color_has_paint
Pango version pango-1:1.50.14-1.0-pentium4. This is a problem of Archlinux32 only - in Archlinux there is no error.
|
|
341 | Packages | Bug Report | Very Low | Critical | python3 is version 11, but all packages install only 3.... | Unconfirmed | |
Task Description
From a fresh install just now:
The /usr/lib/python3.10/site-packages folder is full of dozens of files, but there is little in the 3.11 folder. Some examples: gajim yt-dlp zippy samba.
This seems to affect most new packages that I install, so it is by no means limited to just the examples.
|
|
335 | Packages | Bug Report | Very Low | Medium | python-setuptools-scm 7.1.0-4.1 missing dependency | Unconfirmed | |
Task Description
python-setuptools-scm 7.1.0-4.1 as found in the repo is missing the dependencies python-packaging and python-setuptools, which breaks the build of many other packages.
|
|
93 | Packages: Stable | Bug Report | Very Low | Medium | pyparsing error is preventing applications from startin ... | Closed | |
Task Description
Came across this after completing a system update two days ago.
I run Radicale and that is refusing to start with the following error:
Traceback (most recent call last):
File "/usr/bin/radicale", line 6, in <module>
from pkg_resources import load_entry_point
File "/usr/lib/python3.7/site-packages/pkg_resources/__init__.py", line 84, in <module>
__import__('packaging.requirements')
File "/usr/lib/python3.7/site-packages/packaging/requirements.py", line 9, in <module>
from pyparsing import stringStart, stringEnd, originalTextFor, ParseException
ModuleNotFoundError: No module named 'pyparsing'
When attempting to run pip to see if that might correct the issue, I got the following error:
Traceback (most recent call last):
File "/usr/bin/pip", line 6, in <module>
from pkg_resources import load_entry_point
File "/usr/lib/python3.7/site-packages/pkg_resources/__init__.py", line 84, in <module>
__import__('packaging.requirements')
File "/usr/lib/python3.7/site-packages/packaging/requirements.py", line 9, in <module>
from pyparsing import stringStart, stringEnd, originalTextFor, ParseException
ModuleNotFoundError: No module named 'pyparsing'
It looks as though something recently broke pyparsing and that’s had a knockon effect for a few packages.
|
|
120 | Packages | Bug Report | Very Low | Low | Princeton ArchLinux32 mirror has been out of date; ques ... | Closed | |
Task Description
The ArchLinux32 mirror at http[s]://mirror.math.princeton.edu/pub/archlinux32/ appears to have stopped syncing properly in October. I contacted web@math.princeton.edu on January 1 to alert them to the problem, and received the following response from a Princeton sysadmin:
Here is the configuration I am using:
archlinux32: remotesrc: “rsync://mirror.archlinux32.org/archlinux32/”
localdest: “/var/www/html/pub/archlinux32”
extraopts: “–port=22873”
Looks like at some point this stopped working from upstream:
Raw standard error: rsync: failed to connect to mirror.archlinux32.org (85.10.198.216): Connection refused (111) rsync: failed to connect to mirror.archlinux32.org (2a01:4f8:a0:5264::2): Network is unreachable (101) rsync error: error in socket IO (code 10) at clientserver.c(125) [Receiver=3.1.2]
Can you recommend a better upstream target I can use? And if there are additional constraints on checkin time or frequency.
I informed him that I am not an official member of the ArchLinux32 team, but suggested that using the regular rsync port of 873 might work as mirror.archlinux32.org appears to accept connections to that port from the Internet. As of the time of this writing, it appears that the mirror is now again up to date (although it has other issues returning HTTP error 403 for some of its files), but I promised to bring his additional questions to the official team.
So, to iterate, is this the appropriate target to mirror, or should they use some other parameters?
Thank you.
|
|
293 | Packages | Bug Report | Very Low | Low | Please update those packages:- | Closed | |
Task Description
Gimp Krita
If possible can u add Julia Lang though its on blacklist but i will try to compile it :)
|
|
298 | Packages | Bug Report | Very Low | Low | Please update Arduino | Closed | |
Task Description
Arduino is out dated and my teacher said to use the latest arduino version 1.8.x for the robotics class…
|
|
300 | Packages | Bug Report | Very Low | Low | Pinta needs to be updated | Closed | |
Task Description
please update pinta i am facing problems with p.net clone and the closest is pinta so if u look to update it then it would be greatful
|
|
122 | Packages | Bug Report | Very Low | Low | Permissions bits on files on the primary mirror are too ... | Closed | |
Task Description
In my quest to find a working mirror close to me, I’ve come across another issue with at least a couple of mirrors. Some mirrors respond with a HTTP 403 Forbidden for certain files, notably many of the Pacman database files. At the time of this writing, I’m aware of this problem happening with the princeton.edu and the clarkson.edu mirrors. I’ve been in contact with the admin of one of the mirrors, and they’ve pointed out that the permission bits are set to 0600 at the source. If the primary mirror could have their files be world readable, it would likely fix this problem automatically across more than one mirror.
Is that something we can do?
Steps to verify:
1. Access certain files from the primary mirror using rsync, for example:
% rsync -av rsync://mirror.archlinux32.org/archlinux32/i686/extra/extra.db.tar.gz .
receiving incremental file list
extra.db.tar.gz
sent 43 bytes received 2,044,453 bytes 371,726.55 bytes/sec
total size is 2,043,851 speedup is 1.00
2. Examine permission bits:
% ls -l extra.db.tar.gz
-rw------- 1 user user 2043851 Jan 8 11:51 extra.db.tar.gz
Should be -rw-r–r–.
|
|
274 | Packages | Bug Report | Very Low | Medium | perl-term-readline-gnu should be rebuilt due to new per ... | Closed | |
Task Description
When you have system update there is this warning:
Warn about old perl modules
WARNING: '/usr/lib/perl5/5.34' contains data from at least 1 packages which will NOT be used by the installed perl interpreter.
-> Run the following command to get a list of affected packages: pacman -Qqo '/usr/lib/perl5/5.34'
After searching you see it’s caused by
$ pacman -Qqo '/usr/lib/perl5/5.34'
perl-term-readline-gnu
So this package should be rebulded, because in repositories is perl 5.36
More info and problem description https://forum.manjaro.pl/t/archlinux32-ostrzezenie-od-perl/2356
|
|
346 | Packages | Bug Report | Very Low | Low | pandoc: error while loading shared libraries | Unconfirmed | |
Task Description
# pacman -Syyuu base
# pacman -S pandoc
# pandoc
pandoc: error while loading shared libraries: libHSzip-archive-0.4.1-FOOm53qGfUr2AB1Oel9iH4-ghc8.10.2.so: cannot open shared object file: No such file or directory
|
|
180 | Packages: Stable | Bug Report | Very Low | Low | Pandoc requires specific-version haskell dependencies | Closed | |
Task Description
# pandoc --version
pandoc: error while loading shared libraries: libHSzip-archive-0.4.1-4yLWnBS0zifKkvfHVbmUo1-ghc8.10.2.so: cannot open shared object file: No such file or directory
<code>
Versions:
<code>
# pacman -Q | grep haskell
haskell-aeson 1.5.4.1-19.0
haskell-aeson-pretty 0.8.8-94.0
haskell-ansi-terminal 0.11-17.0
haskell-asn1-encoding 0.9.6-58.0
haskell-asn1-parse 0.9.5-58.0
haskell-asn1-types 0.3.4-37.0
haskell-assoc 1.0.2-27.0
haskell-async 2.2.2-40.0
haskell-attoparsec 0.13.2.4-36.0
haskell-base-compat 0.11.2-4.2
haskell-base-compat-batteries 0.11.2-11.0
haskell-base-orphans 0.8.3-14.0
haskell-base16-bytestring 0.1.1.7-3.0
haskell-base64-bytestring 1.2.0.1-3.0
haskell-basement 0.0.11-10.1
haskell-bifunctors 5.5.8-13.0
haskell-blaze-builder 0.4.2.1-2.1
haskell-blaze-html 0.9.1.2-57.0
haskell-blaze-markup 0.8.2.7-41.0
haskell-byteable 0.1.1-22.1
haskell-case-insensitive 1.2.1.0-39.0
haskell-cereal 0.5.8.1-9.0
haskell-citeproc 0.3.0.9-9.0
haskell-cmdargs 0.10.21-1.0
haskell-colour 2.3.5-75.0
haskell-commonmark 0.1.1.2-2.0
haskell-commonmark-extensions 0.2.0.3-1.0
haskell-commonmark-pandoc 0.2.0.1-24.0
haskell-comonad 5.0.6-58.0
haskell-conduit 1.3.4-3.0
haskell-conduit-extra 1.3.5-70.0
haskell-connection 0.3.1-99.0
haskell-cookie 0.4.5-9.1
haskell-cryptonite 0.27-32.0
haskell-data-default 0.7.1.1-87.0
haskell-data-default-class 0.1.2.0-21.1
haskell-data-default-instances-containers 0.0.1-33.1
haskell-data-default-instances-dlist 0.0.1-100.0
haskell-data-default-instances-old-locale 0.0.1-33.1
haskell-data-fix 0.3.0-35.0
haskell-digest 0.0.1.2-22.1
haskell-distributive 0.6.2-40.0
haskell-dlist 1.0-23.0
haskell-doclayout 0.3-45.0
haskell-doctemplates 0.9-40.0
haskell-emojis 0.1-47.0
haskell-erf 2.0.0.0-21.0
haskell-errors 2.3.0-59.1
haskell-file-embed 0.0.13.0-3.1
haskell-glob 0.10.1-28.0
haskell-haddock-library 1.9.0-58.0
haskell-hashable 1.3.0.0-36.0
haskell-hourglass 0.2.12-82.0
haskell-hslua 1.3.0-2.0
haskell-hslua-module-system 0.2.2.1-17.0
haskell-hslua-module-text 0.3.0.1-5.0
haskell-hsyaml 0.2.1.0-52.0
haskell-http 4000.3.15-49.0
haskell-http-client 0.7.6-14.0
haskell-http-client-tls 0.3.5.3-359.0
haskell-http-types 0.12.3-100.0
haskell-hxt 9.3.1.18-196.0
haskell-hxt-charproperties 9.5.0.0-1.0
haskell-hxt-regex-xmlschema 9.2.0.7-2.0
haskell-hxt-unicode 9.0.2.4-22.0
haskell-indexed-traversable 0.1.1-3.1
haskell-integer-logarithms 1.0.3.1-3.1
haskell-ipynb 0.1.0.1-192.0
haskell-jira-wiki-markup 1.3.2-27.0
haskell-juicypixels 3.3.5-37.0
haskell-memory 0.15.0-49.0
haskell-mime-types 0.1.0.9-11.1
haskell-mono-traversable 1.0.15.1-74.0
haskell-network 3.1.2.1-1.0
haskell-network-uri 2.6.3.0-217.0
haskell-old-locale 1.0.0.7-27.1
haskell-old-time 1.1.0.3-27.1
haskell-pandoc-types 1.22-13.0
haskell-pem 0.2.4-114.0
haskell-primitive 0.7.1.0-29.0
haskell-quickcheck 2.14.2-11.0
haskell-random 1.2.0-54.0
haskell-resourcet 1.2.4.2-31.0
haskell-safe 0.3.19-5.1
haskell-scientific 0.3.6.2-53.0
haskell-sha 1.6.4.4-16.1
haskell-skylighting 0.10.2-24.0
haskell-skylighting-core 0.10.2-24.0
haskell-socks 0.6.1-90.0
haskell-split 0.2.3.4-88.0
haskell-splitmix 0.1.0.3-5.0
haskell-streaming-commons 0.2.2.1-28.1
haskell-strict 0.4.0.1-1.0
haskell-syb 0.7.1-8.0
haskell-tagged 0.8.6.1-2.2
haskell-tagsoup 0.14.8-75.0
haskell-temporary 1.3-130.0
haskell-texmath 0.12.0.3-40.0
haskell-text-conversions 0.3.1-62.0
haskell-text-icu 0.7.0.1-37.1
haskell-th-abstraction 0.4.2.0-2.2
haskell-th-compat 0.1-12.0
haskell-these 1.1.1.1-28.0
haskell-time-compat 1.9.5-1.0
haskell-tls 1.5.5-3.0
haskell-transformers-compat 0.6.6-3.1
haskell-typed-process 0.2.6.0-63.0
haskell-unicode-transforms 0.3.7.1-42.0
haskell-uniplate 1.6.13-4.0
haskell-unliftio-core 0.2.0.1-6.1
haskell-unordered-containers 0.2.13.0-11.0
haskell-utf8-string 1.0.1.1-20.0
haskell-uuid-types 1.0.3-58.0
haskell-vector 0.12.1.2-64.0
haskell-vector-algorithms 0.8.0.4-1.0
haskell-x509 1.7.5-137.0
haskell-x509-store 1.6.7-136.0
haskell-x509-system 1.6.6-204.0
haskell-x509-validation 1.6.11-136.0
haskell-xml 1.3.14-27.2
haskell-xml-conduit 1.9.0.0-77.0
haskell-xml-types 0.3.8-5.1
haskell-zip-archive 0.4.1-66.0
haskell-zlib 0.6.2.2-4.0
|