Installing wireguard-dkms fails with:

(2/2) Install DKMS modules
==> dkms install wireguard/0.0.20200318 -k 5.5.8-arch1-1.0
Error! Bad return status for module build on kernel: 5.5.8-arch1-1.0 (i686)
Consult /var/lib/dkms/wireguard/0.0.20200318/build/make.log for more information.

The file /var/lib/dkms/wireguard/0.0.20200318/build/make.log contains the following messages:

DKMS make.log for wireguard-0.0.20200318 for kernel 5.5.8-arch1-1.0 (i686)
Fri 03 Apr 2020 10:11:21 PM CEST
make: Entering directory '/usr/lib/modules/5.5.8-arch1-1.0/build'
  AR      /var/lib/dkms/wireguard/0.0.20200318/build/built-in.a
  CC [M]  /var/lib/dkms/wireguard/0.0.20200318/build/main.o
cc1: error: incompatible gcc/plugin versions
cc1: error: fail to initialize plugin ./scripts/gcc-plugins/structleak_plugin.so
make[1]: *** [scripts/Makefile.build:266: /var/lib/dkms/wireguard/0.0.20200318/build/main.o] Error 1
make: *** [Makefile:1693: /var/lib/dkms/wireguard/0.0.20200318/build] Error 2
make: Leaving directory '/usr/lib/modules/5.5.8-arch1-1.0/build'

# pacman -Sy ffmpeg
:: Synchronizing package databases… core is up to date
extra is up to date
community is up to date
resolving dependencies… warning: cannot resolve “libx264.so=163-32”, a dependency of “ffmpeg” :: The following package cannot be upgraded due to unresolvable dependencies:

    ffmpeg

Telegram Desktop fails to start with an error about incompatible Qt libraries, I think it needs to be rebuilt.

Supertux needs to be rebuilt as it currently depends on the wrong version of libboostfilesystem.

https://www.archlinux32.org/packages/i686/community/supertux/ not satisfiable dependency: “libboost_filesystem.so.1.72.0” (link)
not satisfiable dependency: “libboost_locale.so.1.72.0” (link)

This affects all architectures (i686 and pentium4)

it is not possible to enable staging

$ sudo pacman -Syuu
:: Synchronizing package databases...
 core-staging is up to date
 core is up to date
 extra-staging                      2.5 MiB  2.22 MiB/s 00:01 [##################################] 100%
 extra is up to date
 community-staging is up to date
 community is up to date
:: Starting full system upgrade...
resolving dependencies...
:: There are 2 providers available for dbus-units:
:: Repository core-staging
   1) dbus-broker-units  2) dbus-daemon-units

Enter a number (default=1): 
looking for conflicting packages...
:: cryptsetup and mkinitcpio are in conflict. Remove mkinitcpio? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: unable to satisfy dependency 'initramfs' required by linux

SPAM

SPAM

SPAM

SPAM

SPAM

no task description

no task description

no task description

icu69.1-1.0 however snapper still links against libicuuc.so.68

Running snapper now gives the following error:

# snapper list /
snapper: error while loading shared libraries: libicuuc.so.68: cannot open shared object file: No such file or directory

When trying to install the package, packman complies about the the key to be of unknown trust. Cheking the keyring the associated key appers to be expired.

The quazip-qt5 package for both i686 and pentium4 contains the Qt6 libraries instead of the Qt5 ones.

The quazip package also no longer seems to exist upstream and should probably be removed in Arch32 as well.

While installing qemu-desktop for Archlinux32 following error appears:

/usr/bin/gtk-query-immodules-3.0: symbol lookup error: /usr/liblibpango-1.0.so.0: undefined symbol: hb_ot_color_has_paint

Pango version pango-1:1.50.14-1.0-pentium4. This is a problem of Archlinux32 only - in Archlinux there is no error.

Came across this after completing a system update two days ago.

I run Radicale and that is refusing to start with the following error:

Traceback (most recent call last):
  File "/usr/bin/radicale", line 6, in <module>
    from pkg_resources import load_entry_point
  File "/usr/lib/python3.7/site-packages/pkg_resources/__init__.py", line 84, in <module>
    __import__('packaging.requirements')
  File "/usr/lib/python3.7/site-packages/packaging/requirements.py", line 9, in <module>
    from pyparsing import stringStart, stringEnd, originalTextFor, ParseException
ModuleNotFoundError: No module named 'pyparsing'

When attempting to run pip to see if that might correct the issue, I got the following error:

Traceback (most recent call last):
  File "/usr/bin/pip", line 6, in <module>
    from pkg_resources import load_entry_point
  File "/usr/lib/python3.7/site-packages/pkg_resources/__init__.py", line 84, in <module>
    __import__('packaging.requirements')
  File "/usr/lib/python3.7/site-packages/packaging/requirements.py", line 9, in <module>
    from pyparsing import stringStart, stringEnd, originalTextFor, ParseException
ModuleNotFoundError: No module named 'pyparsing'

It looks as though something recently broke pyparsing and that’s had a knockon effect for a few packages.

The ArchLinux32 mirror at http[s]://mirror.math.princeton.edu/pub/archlinux32/ appears to have stopped syncing properly in October. I contacted web@math.princeton.edu on January 1 to alert them to the problem, and received the following response from a Princeton sysadmin:

Here is the configuration I am using:

archlinux32:
   remotesrc: “rsync://mirror.archlinux32.org/archlinux32/”
   localdest: “/var/www/html/pub/archlinux32”
   extraopts: “–port=22873”

Looks like at some point this stopped working from upstream:

Raw standard error:
rsync: failed to connect to mirror.archlinux32.org (85.10.198.216): Connection refused (111)
rsync: failed to connect to mirror.archlinux32.org (2a01:4f8:a0:5264::2): Network is unreachable (101)
rsync error: error in socket IO (code 10) at clientserver.c(125) [Receiver=3.1.2]

Can you recommend a better upstream target I can use? And if there are additional constraints on checkin time or frequency.

I informed him that I am not an official member of the ArchLinux32 team, but suggested that using the regular rsync port of 873 might work as mirror.archlinux32.org appears to accept connections to that port from the Internet. As of the time of this writing, it appears that the mirror is now again up to date (although it has other issues returning HTTP error 403 for some of its files), but I promised to bring his additional questions to the official team.

So, to iterate, is this the appropriate target to mirror, or should they use some other parameters?

Thank you.

Gimp
Krita

If possible can u add Julia Lang though its on blacklist but i will try to compile it :)

Arduino is out dated and my teacher said to use the latest arduino version 1.8.x for the robotics class…

please update pinta i am facing problems with p.net clone and the closest is pinta so if u look to update it then it would be greatful

In my quest to find a working mirror close to me, I’ve come across another issue with at least a couple of mirrors. Some mirrors respond with a HTTP 403 Forbidden for certain files, notably many of the Pacman database files. At the time of this writing, I’m aware of this problem happening with the princeton.edu and the clarkson.edu mirrors. I’ve been in contact with the admin of one of the mirrors, and they’ve pointed out that the permission bits are set to 0600 at the source. If the primary mirror could have their files be world readable, it would likely fix this problem automatically across more than one mirror.

Is that something we can do?

Steps to verify:

% rsync -av rsync://mirror.archlinux32.org/archlinux32/i686/extra/extra.db.tar.gz .
receiving incremental file list
extra.db.tar.gz

sent 43 bytes  received 2,044,453 bytes  371,726.55 bytes/sec
total size is 2,043,851  speedup is 1.00

% ls -l extra.db.tar.gz
-rw------- 1 user user 2043851 Jan  8 11:51 extra.db.tar.gz

When you have system update there is this warning:

Warn about old perl modules
WARNING: '/usr/lib/perl5/5.34' contains data from at least 1 packages which will NOT be used by the installed perl interpreter.
 -> Run the following command to get a list of affected packages: pacman -Qqo '/usr/lib/perl5/5.34'

After searching you see it’s caused by

$ pacman -Qqo '/usr/lib/perl5/5.34'
perl-term-readline-gnu

So this package should be rebulded, because in repositories is perl 5.36

More info and problem description https://forum.manjaro.pl/t/archlinux32-ostrzezenie-od-perl/2356

# pandoc --version
pandoc: error while loading shared libraries: libHSzip-archive-0.4.1-4yLWnBS0zifKkvfHVbmUo1-ghc8.10.2.so: cannot open shared object file: No such file or directory
<code>

Versions:
<code>
# pacman -Q | grep haskell
haskell-aeson 1.5.4.1-19.0
haskell-aeson-pretty 0.8.8-94.0
haskell-ansi-terminal 0.11-17.0
haskell-asn1-encoding 0.9.6-58.0
haskell-asn1-parse 0.9.5-58.0
haskell-asn1-types 0.3.4-37.0
haskell-assoc 1.0.2-27.0
haskell-async 2.2.2-40.0
haskell-attoparsec 0.13.2.4-36.0
haskell-base-compat 0.11.2-4.2
haskell-base-compat-batteries 0.11.2-11.0
haskell-base-orphans 0.8.3-14.0
haskell-base16-bytestring 0.1.1.7-3.0
haskell-base64-bytestring 1.2.0.1-3.0
haskell-basement 0.0.11-10.1
haskell-bifunctors 5.5.8-13.0
haskell-blaze-builder 0.4.2.1-2.1
haskell-blaze-html 0.9.1.2-57.0
haskell-blaze-markup 0.8.2.7-41.0
haskell-byteable 0.1.1-22.1
haskell-case-insensitive 1.2.1.0-39.0
haskell-cereal 0.5.8.1-9.0
haskell-citeproc 0.3.0.9-9.0
haskell-cmdargs 0.10.21-1.0
haskell-colour 2.3.5-75.0
haskell-commonmark 0.1.1.2-2.0
haskell-commonmark-extensions 0.2.0.3-1.0
haskell-commonmark-pandoc 0.2.0.1-24.0
haskell-comonad 5.0.6-58.0
haskell-conduit 1.3.4-3.0
haskell-conduit-extra 1.3.5-70.0
haskell-connection 0.3.1-99.0
haskell-cookie 0.4.5-9.1
haskell-cryptonite 0.27-32.0
haskell-data-default 0.7.1.1-87.0
haskell-data-default-class 0.1.2.0-21.1
haskell-data-default-instances-containers 0.0.1-33.1
haskell-data-default-instances-dlist 0.0.1-100.0
haskell-data-default-instances-old-locale 0.0.1-33.1
haskell-data-fix 0.3.0-35.0
haskell-digest 0.0.1.2-22.1
haskell-distributive 0.6.2-40.0
haskell-dlist 1.0-23.0
haskell-doclayout 0.3-45.0
haskell-doctemplates 0.9-40.0
haskell-emojis 0.1-47.0
haskell-erf 2.0.0.0-21.0
haskell-errors 2.3.0-59.1
haskell-file-embed 0.0.13.0-3.1
haskell-glob 0.10.1-28.0
haskell-haddock-library 1.9.0-58.0
haskell-hashable 1.3.0.0-36.0
haskell-hourglass 0.2.12-82.0
haskell-hslua 1.3.0-2.0
haskell-hslua-module-system 0.2.2.1-17.0
haskell-hslua-module-text 0.3.0.1-5.0
haskell-hsyaml 0.2.1.0-52.0
haskell-http 4000.3.15-49.0
haskell-http-client 0.7.6-14.0
haskell-http-client-tls 0.3.5.3-359.0
haskell-http-types 0.12.3-100.0
haskell-hxt 9.3.1.18-196.0
haskell-hxt-charproperties 9.5.0.0-1.0
haskell-hxt-regex-xmlschema 9.2.0.7-2.0
haskell-hxt-unicode 9.0.2.4-22.0
haskell-indexed-traversable 0.1.1-3.1
haskell-integer-logarithms 1.0.3.1-3.1
haskell-ipynb 0.1.0.1-192.0
haskell-jira-wiki-markup 1.3.2-27.0
haskell-juicypixels 3.3.5-37.0
haskell-memory 0.15.0-49.0
haskell-mime-types 0.1.0.9-11.1
haskell-mono-traversable 1.0.15.1-74.0
haskell-network 3.1.2.1-1.0
haskell-network-uri 2.6.3.0-217.0
haskell-old-locale 1.0.0.7-27.1
haskell-old-time 1.1.0.3-27.1
haskell-pandoc-types 1.22-13.0
haskell-pem 0.2.4-114.0
haskell-primitive 0.7.1.0-29.0
haskell-quickcheck 2.14.2-11.0
haskell-random 1.2.0-54.0
haskell-resourcet 1.2.4.2-31.0
haskell-safe 0.3.19-5.1
haskell-scientific 0.3.6.2-53.0
haskell-sha 1.6.4.4-16.1
haskell-skylighting 0.10.2-24.0
haskell-skylighting-core 0.10.2-24.0
haskell-socks 0.6.1-90.0
haskell-split 0.2.3.4-88.0
haskell-splitmix 0.1.0.3-5.0
haskell-streaming-commons 0.2.2.1-28.1
haskell-strict 0.4.0.1-1.0
haskell-syb 0.7.1-8.0
haskell-tagged 0.8.6.1-2.2
haskell-tagsoup 0.14.8-75.0
haskell-temporary 1.3-130.0
haskell-texmath 0.12.0.3-40.0
haskell-text-conversions 0.3.1-62.0
haskell-text-icu 0.7.0.1-37.1
haskell-th-abstraction 0.4.2.0-2.2
haskell-th-compat 0.1-12.0
haskell-these 1.1.1.1-28.0
haskell-time-compat 1.9.5-1.0
haskell-tls 1.5.5-3.0
haskell-transformers-compat 0.6.6-3.1
haskell-typed-process 0.2.6.0-63.0
haskell-unicode-transforms 0.3.7.1-42.0
haskell-uniplate 1.6.13-4.0
haskell-unliftio-core 0.2.0.1-6.1
haskell-unordered-containers 0.2.13.0-11.0
haskell-utf8-string 1.0.1.1-20.0
haskell-uuid-types 1.0.3-58.0
haskell-vector 0.12.1.2-64.0
haskell-vector-algorithms 0.8.0.4-1.0
haskell-x509 1.7.5-137.0
haskell-x509-store 1.6.7-136.0
haskell-x509-system 1.6.6-204.0
haskell-x509-validation 1.6.11-136.0
haskell-xml 1.3.14-27.2
haskell-xml-conduit 1.9.0.0-77.0
haskell-xml-types 0.3.8-5.1
haskell-zip-archive 0.4.1-66.0
haskell-zlib 0.6.2.2-4.0

The pactree tool in pacman-contrib 1.10.5 requires libalpm.so.13 which belongs to an older version of pacman. Rebuilding pacman-contrib with the latest version of pacman installed should resolve the issue.

After updating my system I found that sshd.service will no longer start.

As a temporary work round I downgraded openssl from 3.2.1-1.0 to 3.1.4-1.0

[keith@Arch32 ~]$ sudo pacman -Syu
:: Synchronising package databases...
 core-testing is up to date
 core is up to date
 extra-testing is up to date
 extra is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...

Package (1)           Old Version  New Version  Net Change

core-testing/openssl  3.1.4-1.0    3.2.1-1.0      1.03 MiB

Total Installed Size:  10.54 MiB
Net Upgrade Size:       1.03 MiB

:: Proceed with installation? [Y/n] 
(1/1) checking keys in keyring                                                                 [--------------------------------------------------------] 100%
(1/1) checking package integrity                                                               [--------------------------------------------------------] 100%
(1/1) loading package files                                                                    [--------------------------------------------------------] 100%
(1/1) checking for file conflicts                                                              [--------------------------------------------------------] 100%
(1/1) checking available disk space                                                            [--------------------------------------------------------] 100%
:: Processing package changes...
(1/1) upgrading openssl                                                                        [--------------------------------------------------------] 100%
:: Running post-transaction hooks...
(1/1) Arming ConditionNeedsUpdate...
[keith@Arch32 ~]$ systemctl restart sshd.service
[keith@Arch32 ~]$ systemctl status sshd.service
× sshd.service - OpenSSH Daemon
     Loaded: loaded (/usr/lib/systemd/system/sshd.service; enabled; preset: disabled)
     Active: failed (Result: exit-code) since Tue 2024-02-13 05:36:11 GMT; 6s ago
   Duration: 9ms
    Process: 1008 ExecStart=/usr/bin/sshd -D (code=exited, status=255/EXCEPTION)
   Main PID: 1008 (code=exited, status=255/EXCEPTION)
        CPU: 9ms

Feb 13 05:36:11 Arch32 systemd[1]: sshd.service: Scheduled restart job, restart counter is at 5.
Feb 13 05:36:11 Arch32 systemd[1]: Stopped OpenSSH Daemon.
Feb 13 05:36:11 Arch32 systemd[1]: sshd.service: Start request repeated too quickly.
Feb 13 05:36:11 Arch32 systemd[1]: sshd.service: Failed with result 'exit-code'.
Feb 13 05:36:11 Arch32 systemd[1]: Failed to start OpenSSH Daemon.
[keith@Arch32 ~]$ sudo downgrade openssl
loading packages...
warning: downgrading package openssl (3.2.1-1.0 => 3.1.4-1.0)
resolving dependencies...
looking for conflicting packages...

Package (1)  Old Version  New Version  Net Change

openssl      3.2.1-1.0    3.1.4-1.0     -1.03 MiB

Total Installed Size:   9.51 MiB
Net Upgrade Size:      -1.03 MiB

:: Proceed with installation? [Y/n] 
(1/1) checking keys in keyring                                                                 [--------------------------------------------------------] 100%
(1/1) checking package integrity                                                               [--------------------------------------------------------] 100%
(1/1) loading package files                                                                    [--------------------------------------------------------] 100%
(1/1) checking for file conflicts                                                              [--------------------------------------------------------] 100%
(1/1) checking available disk space                                                            [--------------------------------------------------------] 100%
:: Processing package changes...
(1/1) downgrading openssl                                                                      [--------------------------------------------------------] 100%
:: Running post-transaction hooks...
(1/1) Arming ConditionNeedsUpdate...
add openssl to IgnorePkg? [y/N] 
[keith@Arch32 ~]$ systemctl restart sshd.service
[keith@Arch32 ~]$ systemctl status sshd.service
● sshd.service - OpenSSH Daemon
     Loaded: loaded (/usr/lib/systemd/system/sshd.service; enabled; preset: disabled)
     Active: active (running) since Tue 2024-02-13 05:37:20 GMT; 5s ago
   Main PID: 1138 (sshd)
      Tasks: 1 (limit: 2293)
     Memory: 772.0K
        CPU: 61ms
     CGroup: /system.slice/sshd.service
             └─1138 "sshd: /usr/bin/sshd -D [listener] 0 of 10-100 startups"

Feb 13 05:37:20 Arch32 systemd[1]: Started OpenSSH Daemon.
Feb 13 05:37:20 Arch32 sshd[1138]: Server listening on 0.0.0.0 port 22.
Feb 13 05:37:20 Arch32 sshd[1138]: Server listening on :: port 22.
[keith@Arch32 ~]$ 

I didn’t found any message about reporting new mirrors of archlinux32 project, so I decided to open new FR. Sorry if I mistaken and show me the right way, please :)

Domain name: mirror.nw-sys.ru
Country: Russia
Supported access methods for mirror:
http(s) - http(s)://mirror.nw-sys.ru/archlinux32/
rsync - rsync://mirror.nw-sys.ru/archlinux32
Mirror bandwidth - 100 Mbit/s almostly, with slight slowdowns around the day.
Primary administrative contact - no1@no1sg.ru
Alternative administrative contact - morgan29rus@gmail.com
Source mirror - mirror.archlinux32.org

I tried to install archlinux32 using the archinstall installer, which is shipped with the installation medium.
Installation is working fine until pacstrap, where it will crash because all mirrors will return 404. I checked
my connection and it is working and dns also works. When I viewed the /etc/pacman.d/mirrorlist file, I saw that the script
wrote the default archlinux mirrors for the region specified in the installer to the file and the don’t contain the 32bit packages.

Over in  FS#119 , @abaumann mentioned that the libicu upgrade from 67 to 68 was part of what broke gdb. I missed the libicu upgrade when looking at gdb, but now that that one is resolved, I noticed a number of other packages that still link against the old and now nonexistant /usr/lib/libicu*.so.67 files. On my particular system, the following packages are installed, link to icu 67, and need rebuilt as well:

* harfbuzz-icu (2.7.0-1.0)
* mongo-c-driver (1.17.3-1.0)
* postfix (3.5.6-2.0)
* postgresql (12.4-1.0)
* postgresql-old-upgrade (12.5-1.0)
* samba (4.12.3-1.2)
* smbclient (4.12.3-1.2)
* syslog-ng (3.28.1-3.0)
* texlive-bin (2020.54586-4.0)
* xfsprogs (5.8.0-1.0)

… but I’m sure you have a way of determining all the affected packages?

As a workaround, in case others have the same problem, I manually extracted the old versioned .so files from the previous package to get things working again:

```
tar -C / -xf /var/cache/pacman/pkg/icu-67.1-1.0-i686.pkg.tar.zst –wildcards ‘usr/lib/lib*.so.*’ ```

- I’ll just have to remember to clean them up again later.

Here’s 1:0.33.1-1.0-pentium4:

$ pacman -Qs mpv
local/mpv 1:0.33.1-1.0
    a free, open source, and cross-platform media player

$ mpv --version
mpv 0.33.1-dirty Copyright © 2000-2020 mpv/MPlayer/mplayer2 projects
 built on UNKNOWN
FFmpeg library versions:
   libavutil       56.51.100
   libavcodec      58.91.100
   libavformat     58.45.100
   libswscale      5.7.100
   libavfilter     7.85.100
   libswresample   3.7.100
FFmpeg version: n4.3.2

Here’s 1:0.33.1-2.0-pentium4:

$ pacman -Qs mpv
local/mpv 1:0.33.1-2.0
    a free, open source, and cross-platform media player

$ mpv --msg-level=all=trace --version
libavutil: 56.70.100 -> 56.51.100
Aborted (core dumped)

Looks to me like it might be a library version thing (I’m up-to-date according to

pacman -Syu

), but I’ve only been running Arch32 for 24 hours so I’m not sure where further to dig.

$ pacman -Qs mpv
local/mpv 1:0.33.1-1.0
    a free, open source, and cross-platform media player
$ pacman -Qs srt
local/srt 1.4.3-1.0
    Secure Reliable Transport library
$ pacman -Fl srt | grep libsrt
srt usr/lib/libsrt.so
srt usr/lib/libsrt.so.1.4
srt usr/lib/libsrt.so.1.4.3
$ mpv
mpv: error while loading shared libraries: libsrt.so.1: cannot open shared object file: No such file or directory
$ ldd /usr/bin/mpv | grep srt
	libsrt.so.1 => not found
$ sudo ln -s /usr/lib/libsrt.so.1.4.3 /usr/lib/libsrt.so.1
$ mpv --version
mpv 0.33.1-dirty Copyright © 2000-2020 mpv/MPlayer/mplayer2 projects
 built on UNKNOWN
FFmpeg library versions:
   libavutil       56.51.100
   libavcodec      58.91.100
   libavformat     58.45.100
   libswscale      5.7.100
   libavfilter     7.85.100
   libswresample   3.7.100
FFmpeg version: n4.3.2

$ ldd /usr/bin/mpv | grep srt
	libsrt.so.1 => /usr/lib/libsrt.so.1 (0xb2a54000)

Running ldconfig does not create the missing symlink.

Hi,

If I run mpd, it fails to run due to a missing PW_LOG_TOPIC_DEFAULT symbol:
> $ mpd
> mpd: symbol lookup error: mpd: undefined symbol: PW_LOG_TOPIC_DEFAULT

While I run Parabola, both mpd and pipewire comes from the i686 repository of Arch Linux 32:
> extra/mpd 0.23.5-1.2 [installed]
> Flexible, powerful, server-side application for playing music
> extra/pipewire 1:0.3.36-1.0 [installed]
> Low-latency audio/video router and processor

If I look on a x86_64 Parabola installation instead, PW_LOG_TOPIC_DEFAULT can be found in libpipewire:
> $ readelf -s /usr/lib/libpipewire-0.3.so.0 | grep PW_LOG_
> 383: 00000000000d7128 8 OBJECT GLOBAL DEFAULT 21 > PW_LOG_TOPIC_DEFAULT

But that command returns nothing on Parabola i686.

Denis.

grep LLVM /var/log/Xorg.0.log
[    29.423] (EE) AIGLX error: dlopen of /usr/lib/dri/r300_dri.so failed (libLLVM-8.so: cannot open shared object file: No such file or directory)
[    29.424] (EE) AIGLX error: dlopen of /usr/lib/dri/swrast_dri.so failed (libLLVM-8.so: cannot open shared object file: No such file or directory)

ldd /usr/lib/dri/r300_dri.so 
        linux-gate.so.1 (0xb7f26000)
        libdrm.so.2 => /usr/lib/libdrm.so.2 (0xb6836000)
        libLLVM-8.so => not found
        libexpat.so.1 => /usr/lib/libexpat.so.1 (0xb680a000)
        libdl.so.2 => /usr/lib/libdl.so.2 (0xb6804000)
        libsensors.so.5 => /usr/lib/libsensors.so.5 (0xb67f3000)
        libdrm_radeon.so.1 => /usr/lib/libdrm_radeon.so.1 (0xb67e4000)
        libelf.so.1 => /usr/lib/libelf.so.1 (0xb67c6000)
        libdrm_amdgpu.so.1 => /usr/lib/libdrm_amdgpu.so.1 (0xb67b9000)
        libdrm_nouveau.so.2 => /usr/lib/libdrm_nouveau.so.2 (0xb67ae000)
        libglapi.so.0 => /usr/lib/libglapi.so.0 (0xb678d000)
        libz.so.1 => /usr/lib/libz.so.1 (0xb6773000)
        libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xb6595000)
        libm.so.6 => /usr/lib/libm.so.6 (0xb64c3000)
        libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0xb64a6000)
        libpthread.so.0 => /usr/lib/libpthread.so.0 (0xb6483000)
        libc.so.6 => /usr/lib/libc.so.6 (0xb62d3000)
        /usr/lib/ld-linux.so.2 (0xb7f27000)

ls /usr/lib/libLLVM*
/usr/lib/libLLVM-9.0.0.so  /usr/lib/libLLVM-9.so  /usr/lib/libLLVM.so

$ mc
mc: symbol lookup error: mc: undefined symbol: g_string_new_take

$ mcedit
mcedit: symbol lookup error: mcedit: undefined symbol: g_string_new_take

Linux and Linux-zen kernel 5.16.8.arch1-1.0 made with gcc 11.1 and cannot build dkms modules with gcc 11.2

remake linux and linux-zen kernel with gcc version 11.2

i686:- libreoffice-fresh 7.3.4-2.1
pentium4:- libreoffice-fresh 7.3.2-1.0

There is a problem with libreoffice-fresh and libreoffice-still which appears to be caused by the last update to boost and boost-libs which are now at version 1.76.0-1.3

~]$ libreoffice
javaldx: Could not find a Java Runtime Environment!
Warning: failed to read path from javaldx
/usr/lib/libreoffice/program/soffice.bin: error while loading shared libraries: libboost_locale.so.1.75.0: cannot open shared object file: No such file or directory