|
355 | Packages | Bug Report | Medium | Critical | KDE packages fail to install because of /lib | New | |
Task Description
Some KDE packages try to replace the ‘lib’ symlink with a directory, causing the system to fail to start.
If you are lucky, pacman warns you about it and says:
pacman -S breeze-icons
resolving dependencies...
looking for conflicting packages...
Packages (1) breeze-icons-6.0.0-1.0
Total Installed Size: 71.92 MiB
Net Upgrade Size: 0.61 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [##################################] 100%
(1/1) checking package integrity [##################################] 100%
(1/1) loading package files [##################################] 100%
(1/1) checking for file conflicts [##################################] 100%
error: failed to commit transaction (conflicting files)
breeze-icons: /lib exists in filesystem (owned by filesystem)
Errors occurred, no packages were upgraded
I had one hard-to-reproduce case where I basically nuked my VMs with that.
The recovery procedure in this case is:
# Boot from last ISO
# mount /dev/xxx to /mnt
cd /usr
mv lib/cmake/* usr/lib/cmake/.
mv lib/qml /usr/lib/.
rmdir lib/cmake
rmdir lib
ln -s usr/lib lib
Packages known to misbehave are ‘kqtquickcharts’, ‘breeze-icons’. Surely more to follow..
|
|
210 | Packages | Bug Report | Very Low | Medium | keymap don't gets fixed on login as set in /etc/vconsol... | Unconfirmed | |
Task Description
gzip comes with asm code, if enabled, built a TEXTREL which gets bloqued on boot, so systemd don’t set keymap A lot of tricks in forums, old thread more complete here $506 An old problem. Work around while asm gets fixed is call configure with DEFS=”NO_ASM” like this:
...
export DEFS="NO_ASM"
./configure ....
or,
./configure DEFS="NO_ASM" ....
I have not tested it, but gentoo on x32 have gzip like this and no TEXTRELS here. No matter i486, i686 or pentium.
Hope it helps.
Best regards.
|
|
276 | Packages | Bug Report | Medium | Low | LTO optimization needs to much memory | New | |
Task Description
7234 build 20 0 1353768 1.2g 18020 R 96.1 64.0 4:27.92 lto1-wpa
xf86-video-intel (this is not exactly a huge package, but maybe the included X libraries are?)
We lost it on i486 already (because it doesn’t work with newer gcc, or at least I didn’t investigate how to make it work).
I suggest to get rid of LTO completely. The problem is patching all the options=(lto), –enable-lto/ –without-lto -D b_lto=tru etc. which easily creates a maintainance nightmare.
Maybe an easier way to go is to have them similar to the ‘lib32-’ stripping in the main build scripts or hooks? Downstream this might create trouble tough, as the build systems are different..
Upstream has options=(lto) support, but it doesn’t seen helping here as packages need local flags everywhere..
|
|
126 | Packages | Bug Report | Medium | Low | lua hooks break in TeX on i686 | New | |
Task Description
PANIC: unprotected error in call to Lua API (CPU with SSE2 required)
PANIC: unprotected error in call to Lua API (CPU with SSE2 required)
fmtutil [ERROR]: running `luajittex -ini -jobname=luajittex -progname=luajittex luatex.ini </dev/null' return status: 1
fmtutil [ERROR]: cannot copy log luajittex.log to: /var/lib/texmf/web2c/luajittex
fmtutil [ERROR]: returning error due to option --strict
fmtutil [ERROR]: running `luajithbtex -ini -jobname=luajithbtex -progname=luajithbtex luatex.ini </dev/null' return status: 1
fmtutil [ERROR]: cannot copy log luajithbtex.log to: /var/lib/texmf/web2c/luajithbtex
fmtutil [ERROR]: returning error due to option --strict
error: command failed to execute correctly
|
|
347 | Packages | Bug Report | Very Low | Low | Meld will not start - error message -> Meld requires Gt... | Unconfirmed | |
Task Description
[keith@Arch32 ~]$ meld Meld requires Gtk+ 3.20 or higher. [keith@Arch32 ~]$ pacman -Qi meld Name : meld Version : 3.22.0-2.0 Description : Compare files, directories and working copies Architecture : any URL : https://meldmerge.org/ Licenses : GPL Groups : None Provides : None Depends On : python-gobject python-cairo gtksourceview4 gsettings-desktop-schemas dconf Optional Deps : None Required By : None Optional For : None Conflicts With : None Replaces : None Installed Size : 5.06 MiB Packager : TasosSah arch32@tasossah.com Build Date : Sat 19 Aug 2023 23:25:57 BST Install Date : Sat 26 Aug 2023 07:08:59 BST Install Reason : Explicitly installed Install Script : No Validated By : Signature
[keith@Arch32 ~]$ pacman -Qi gtksourceview4 Name : gtksourceview4 Version : 4.8.4-1.0 Description : A text widget adding syntax highlighting and more to GNOME Architecture : pentium4 URL : https://wiki.gnome.org/Projects/GtkSourceView Licenses : GPL Groups : None Provides : libgtksourceview-4.so=0-32 Depends On : gtk3 libxml2 Optional Deps : None Required By : meld xed Optional For : None Conflicts With : None Replaces : None Installed Size : 7.44 MiB Packager : Andreas Baumann mail@andreasbaumann.cc Build Date : Mon 07 Nov 2022 11:50:56 GMT Install Date : Mon 28 Nov 2022 11:49:04 GMT Install Reason : Installed as a dependency for another package Install Script : No Validated By : Signature
[keith@Arch32 ~]$ pacman -Qi gtk3 Name : gtk3 Version : 1:3.24.37-1.0 Description : GObject-based multi-platform GUI toolkit Architecture : pentium4 URL : https://www.gtk.org/ Licenses : LGPL Groups : None Provides : gtk3-print-backends libgailutil-3.so=0-32 libgdk-3.so=0-32 libgtk-3.so=0-32 Depends On : adwaita-icon-theme atk cairo cantarell-fonts dconf desktop-file-utils fontconfig fribidi gdk-pixbuf2 glib2 harfbuzz iso-codes
libcloudproviders libcolord libcups libegl libepoxy libgl librsvg libxcomposite libx11 libxcursor libxdamage libxext libxfixes
libxi libxinerama libxkbcommon libxrandr libxrender pango shared-mime-info wayland at-spi2-core tracker3 gtk-update-icon-cache
Optional Deps : evince: Default print preview command Required By : bleachbit engrampa firefox gcr gpicview gspell gtkmm3 gtksourceview4 libdbusmenu-gtk3 libgnomekbd libindicator-gtk3 libnma
libpeas lightdm-gtk-greeter lxmusic vte3 xdg-user-dirs-gtk
Optional For : avahi gvfs libcanberra libdecor libreoffice-still Conflicts With : gtk3-print-backends Replaces : gtk3-print-backends⇐3.22.26-1 Installed Size : 49.88 MiB Packager : Andreas Baumann mail@andreasbaumann.cc Build Date : Sun 16 Apr 2023 11:18:09 BST Install Date : Tue 25 Apr 2023 13:06:04 BST Install Reason : Installed as a dependency for another package Install Script : Yes Validated By : Signature
[keith@Arch32 ~]$
|
|
314 | Packages | Bug Report | Very Low | Low | Mumble requires a outdated protobuf | Unconfirmed | |
Task Description
libprotobuf=28 is a mumble (package) dependency, but protobuf package has libprotobuf=32.
I needed to downgrade to protobuf-3.17.3-1.3-pentium4.pkg.tar.zst (from the archive) to install mumble.
|
|
342 | Packages | Bug Report | Very Low | Very Low | nmap missing dependency openssl-1.1 | Unconfirmed | |
Task Description
no task description |
|
132 | Packages | Bug Report | Medium | Low | OLPC-XO-1 kernel, usb8xx module crashing | New | |
Task Description
[ 21.686772] usb8xxx: Firmware ready event received
[ 21.717061] usb8xxx 1-1:1.0 (unnamed net_device) (uninitialized): 00:17:c4:10:e3:67, fw 5.110.22p23, cap 0x000003a3
[ 21.897489] usb8xxx 1-1:1.0 wlan0: Marvell WLAN 802.11 adapter
[ 22.004871] usb8xxx 1-1:1.0 wlan0: PREP_CMD: command 0x0074 failed: 2
[ 22.109002] usb8xxx 1-1:1.0 wlan0: Firmware does not seem to support PS mode
[ 22.217405] usb8xxx 1-1:1.0 wlan0: PREP_CMD: command 0x0043 failed: 1
[ 22.318862] usb8xxx 1-1:1.0 wlan0: HOST_SLEEP_CFG failed 1
[ 23.468484] usb8xxx 1-1:1.0 wlp0s15f5u1: renamed from msh0
[ 43.523176] ------------[ cut here ]------------
[ 43.556197] WARNING: CPU: 0 PID: 148 at net/wireless/core.c:1346 cfg80211_netdev_notifier_call+0x102/0x31e
[ 43.625361] Modules linked in: input_leds led_class usb8xxx libertas serio_raw
[ 43.664224] CPU: 0 PID: 148 Comm: wpa_supplicant Not tainted 5.10.5-arch1-1.0-olpc-xo1 #1
[ 43.715531] Hardware name: OLPC XO/XO, BIOS OLPC Ver 1.00.01 06/11/2014
[ 43.754829] EIP: cfg80211_netdev_notifier_call+0x102/0x31e
[ 43.792862] Code: ff 89 f0 e8 4d fc ff ff 8b 46 7c 85 c0 74 2a 39 58 34 75 25 80 78 64 00 75 16 8b 96 80 00 00 00 85 d2 74 06 80 7a 64 00 75 06 <0f> 0b c6 40 62 01 31 d2 89 f0 e8 3d 7a 00 00 8b 86 88 00 00 00 8b
[ 43.911511] EAX: c36e1d00 EBX: c2cb8800 ECX: ffffffff EDX: 00000000
[ 43.958939] ESI: c341c000 EDI: c1f7d000 EBP: c1eebdd4 ESP: c1eebdbc
[ 44.002464] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 EFLAGS: 00010246
[ 44.045454] CR0: 80050033 CR2: b69e5428 CR3: 01ff0000 CR4: 00000090
[ 44.088019] Call Trace:
[ 44.126010] ? fib_disable_ip+0x2a/0x2d
[ 44.165297] ? cfg80211_register_wdev+0x46/0x46
[ 44.208941] notifier_call_chain+0x2a/0x4e
[ 44.252482] raw_notifier_call_chain+0xc/0xe
[ 44.296501] call_netdevice_notifiers_info+0x5d/0x64
[ 44.338599] call_netdevice_notifiers+0x18/0x1a
[ 44.379580] __dev_notify_flags+0x4a/0x7c
[ 44.419064] dev_change_flags+0x3d/0x46
[ 44.464304] devinet_ioctl+0x260/0x4cd
[ 44.502437] inet_ioctl+0x139/0x163
[ 44.539766] ? dev_name_hash+0x20/0x36
[ 44.577060] ? dev_get_by_name_rcu+0x1c/0x2f
[ 44.614874] ? dev_ioctl+0x2e4/0x40e
[ 44.651928] ? inet_recvmsg+0x77/0x77
[ 44.692778] sock_ioctl+0x2ad/0x36f
[ 44.730157] ? preempt_count_add+0x4a/0x4f
[ 44.771397] ? ____sys_recvmsg+0xbc/0xbc
[ 44.808485] vfs_ioctl+0x1a/0x24
[ 44.847256] __ia32_sys_ioctl+0x5aa/0x5c4
[ 44.891962] ? debug_smp_processor_id+0x12/0x14
[ 44.930996] ? fpregs_assert_state_consistent+0x17/0x34
[ 44.967562] ? exit_to_user_mode_prepare+0x84/0x94
[ 45.002448] do_int80_syscall_32+0x2c/0x39
[ 45.035656] entry_INT80_32+0xf3/0xf3
[ 45.067762] EIP: 0xb790ffc4
[ 45.097915] Code: 83 c4 0c 89 d8 5b 5e 5f 5d c3 66 90 66 90 66 90 66 90 66 90 66 90 53 8b 54 24 10 8b 4c 24 0c 8b 5c 24 08 b8 36 00 00 00 cd 80 <5b> 3d 01 f0 ff ff 0f 83 a0 3f f3 ff c3 66 90 66 90 66 90 66 90 66
[ 45.199342] EAX: ffffffda EBX: 00000007 ECX: 00008914 EDX: bffe736c
[ 45.233187] ESI: bffe736c EDI: 0076c850 EBP: 00000000 ESP: bffe7348
[ 45.266705] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296
[ 45.300799] ---[ end trace 20811b76aa348f84 ]---
[ 64.909322] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s15f5u1: link becomes ready
Warm reboot a second time seems to help.
|
|
348 | Packages | Bug Report | Medium | Low | openssl failing tests | New | |
Task Description
30-test_aesgcm.t ........................ ok ������������������������������������������������������������������
ALG_PERR: engines/e_afalg.c(463): Failed to bind socket : No such file or directory �����������������������������������������������������������������������������������������������������������������������������
# ERROR: (bool) 'EVP_CipherInit_ex(ctx, cipher, e, key, iv, 1) == true' failed @ test/afalgtest.c ������������������������������������������������������������������������������������������������������������������������������������������������������������c :85 �����
# false �����������������������
# 00000000:error:40000067:lib(128)::socket bind failed:engines/e_afalg.c:464: ������������������������������������������������������������������������������������������������������������������������������:
# OPENSSL_TEST_RAND_SEED=1707239178 �����������������������������������������������������������������
not ok 1 - iteration 1 ������������������������������������������ㄠ
# ------------------------------------------------------------------------------ ������������������������������������������������������������������������������������������������������������������������
ALG_PERR: engines/e_afalg.c(463): Failed to bind socket : No such file or directory �����������������������������������������������������������������������������������������������������������������������������
# ERROR: (bool) 'EVP_CipherInit_ex(ctx, cipher, e, key, iv, 1) == true' failed @ test/afalgtest.c ������������������������������������������������������������������������������������������������������������������������������������������������������������c :85 �����
# false �����������������������
# 00000000:error:40000067:lib(128)::socket bind failed:engines/e_afalg.c:464: ������������������������������������������������������������������������������������������������������������������������������:
# OPENSSL_TEST_RAND_SEED=1707239178 �����������������������������������������������������������������
not ok 2 - iteration 2 ������������������������������������������㈠
# ------------------------------------------------------------------------------ ������������������������������������������������������������������������������������������������������������������������
ALG_PERR: engines/e_afalg.c(463): Failed to bind socket : No such file or directory �����������������������������������������������������������������������������������������������������������������������������
# ERROR: (bool) 'EVP_CipherInit_ex(ctx, cipher, e, key, iv, 1) == true' failed @ test/afalgtest.c ������������������������������������������������������������������������������������������������������������������������������������������������������������c :85 �����
# false �����������������������
# 00000000:error:40000067:lib(128)::socket bind failed:engines/e_afalg.c:464: ������������������������������������������������������������������������������������������������������������������������������:
# OPENSSL_TEST_RAND_SEED=1707239178 �����������������������������������������������������������������
not ok 3 - iteration 3 ������������������������������������������㌠
# ------------------------------------------------------------------------------ ������������������������������������������������������������������������������������������������������������������������
# OPENSSL_TEST_RAND_SEED=1707239178 �����������������������������������������������������������
not ok 1 - test_afalg_aes_cbc ������������������������������������������������c
# ------------------------------------------------------------------------------ ������������������������������������������������������������������������������������������������������������������������
../../util/wrap.pl ../../test/afalgtest => 1 ������������������������������������������������������������������
not ok 1 - running afalgtest ������������������������������������������
|
|
343 | Packages | Bug Report | Very Low | Low | Package 'screen 4.9.1-1.0' is missing dependency libute... | Unconfirmed | |
Task Description
Package ‘screen 4.9.1-1.0’ is missing dependency libutempter. I assume this is because libutempter used to be a dependency of util-linux which is part of base, so was assumed to be installed.
With the regular Arch Linux distro libutempter is still a dependency of util-linux.
|
|
337 | Packages | Bug Report | Medium | Low | packages are being downgraded in repos | New | |
Task Description
warning: filesystem: local (2023.09.18-1.0) is newer than core (2023.01.31-1.0)
|
|
164 | Packages | Bug Report | Medium | Low | pam_systemd.so hangs openssh 2 out of 3 times | New | |
Task Description
Effect: you can not log in. The SSHd child runs on 100% CPU doing something. This happens on i486, i686 and pentium4 equally.
|
|
346 | Packages | Bug Report | Very Low | Low | pandoc: error while loading shared libraries | Unconfirmed | |
Task Description
# pacman -Syyuu base
# pacman -S pandoc
# pandoc
pandoc: error while loading shared libraries: libHSzip-archive-0.4.1-FOOm53qGfUr2AB1Oel9iH4-ghc8.10.2.so: cannot open shared object file: No such file or directory
|
|
335 | Packages | Bug Report | Very Low | Medium | python-setuptools-scm 7.1.0-4.1 missing dependency | Unconfirmed | |
Task Description
python-setuptools-scm 7.1.0-4.1 as found in the repo is missing the dependencies python-packaging and python-setuptools, which breaks the build of many other packages.
|
|
341 | Packages | Bug Report | Very Low | Critical | python3 is version 11, but all packages install only 3.... | Unconfirmed | |
Task Description
From a fresh install just now:
The /usr/lib/python3.10/site-packages folder is full of dozens of files, but there is little in the 3.11 folder. Some examples: gajim yt-dlp zippy samba.
This seems to affect most new packages that I install, so it is by no means limited to just the examples.
|
|
116 | Packages | Bug Report | Medium | Low | Race causes iptables not to be ready after startup | New | |
Task Description
Nov 06 08:04:01 eurohp1 systemd[1]: Starting IPv4 Packet Filtering Framework… Nov 06 08:04:01 eurohp1 iptables-restore[287]: Another app is currently holding the xtables lock. Perhap> Nov 06 08:04:01 eurohp1 systemd[1]: iptables.service: Main process exited, code=exited, status=4/NOPERMI> Nov 06 08:04:01 eurohp1 systemd[1]: iptables.service: Failed with result ‘exit-code’. Nov 06 08:04:01 eurohp1 systemd[1]: Failed to start IPv4 Packet Filtering Framework.
Works when starting iptables later manually.
This is security relevant as not having a firewall after startup puts the system at risk.
|
|
166 | Packages | Bug Report | Medium | Low | s2n-tls: failing tests | New | |
Task Description
The following tests FAILED:
91 - s2n_pq_kem_hybrid_kat_test (Failed)
145 - s2n_session_ticket_test (Failed)
154 - s2n_stuffer_network_order_test (Failed)
184 - s2n_x509_validator_test (Failed)
https://github.com/aws/s2n-tls/issues/2405 https://github.com/aws/s2n-tls/issues/2406 https://github.com/aws/s2n-tls/issues/2404
3 are known upstream too.
|
|
333 | Packages | Bug Report | Very Low | High | Sddm 0.19.0-9.0 crashes with Qt 5.15.9 | Assigned | |
Task Description
The current version of sddm (0.19.0-9.0) depends on the previous version of Qt (5.15.8). After updating Qt, sddm crashes with an incompatible Qt library error.
|
|
163 | Packages | Bug Report | Medium | Low | sphinx_rtd_theme is used to build documentation but doe... | New | |
Task Description
build
running build_py
npm WARN npm npm does not support Node.js v15.9.0
npm WARN npm You should probably upgrade to a newer version of node as we
npm WARN npm can't make any promises that npm will work with this version.
npm WARN npm Supported releases of Node.js are the latest release of 6, 8, 9, 10, 11, 12, 13.
npm WARN npm You can find the latest version at https://nodejs.org/
> sphinx_rtd_theme@0.5.1 preinstall /build/python-sphinx_rtd_theme/src/sphinx_rtd_theme-0.5.1
> bin/preinstall.js
Traceback (most recent call last):
File "/build/python-sphinx_rtd_theme/src/sphinx_rtd_theme-0.5.1/setup.py", line 86, in <module>
setup(
File "/usr/lib/python3.9/site-packages/setuptools/__init__.py", line 153, in setup
return distutils.core.setup(**attrs)
File "/usr/lib/python3.9/distutils/core.py", line 148, in setup
dist.run_commands()
File "/usr/lib/python3.9/distutils/dist.py", line 966, in run_commands
self.run_command(cmd)
File "/usr/lib/python3.9/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/usr/lib/python3.9/distutils/command/build.py", line 135, in run
self.run_command(cmd_name)
File "/usr/lib/python3.9/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.9/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/build/python-sphinx_rtd_theme/src/sphinx_rtd_theme-0.5.1/setup.py", line 22, in run
subprocess.run(['npm', 'install'], check=True)
File "/usr/lib/python3.9/subprocess.py", line 524, in run
raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '['npm', 'install']' died with <Signals.SIGSEGV: 11>.
==> ERROR: A failure occurred in build().
Aborting...
==> ERROR: Build failed, check /var/lib/archbuild/staging-pentium4/abaumann/build
|
|
143 | Packages | Bug Report | Medium | Low | thunderbird doesn't build and run | New | |
Task Description
still linked against icu67.
Same here, I cannot believe that somebody is actually using thunderbird on Archlinux32 anymore.
Triggered rebuild, doesn’t build currently.
|
|
349 | Packages | Bug Report | Medium | Low | top print "get_mempolicy: Function not implemented" on ... | New | |
Task Description
no task description |
|
196 | Packages | Bug Report | Medium | Low | update filesystem | New | |
Task Description
b3da2fc1c25065a1bd09f9930eeed1d11dc312e4 only updated half the package - we’re missing:
- update the logo - update the url (?) - only if both are done: updating the hash on top of the PKGBUILD
|
|
117 | Packages | Bug Report | Very Low | Low | vboxdrive module missing | New | |
Task Description
vboxdrv module is missing making virtualbox unusable.
I’m currently running kernel 5.9.0-1.0-pae but it doesn’t seem to be there in any version
|
|
176 | Devops | Feature Request | Medium | Low | bring back archiso32 dual boot | New | |
Task Description
We should make archiso32 be able to build a i686- and x86_64-bootable iso, again. This is really handy on a usb stick as a rescue system.
The problem with the old dual iso is, that I had to do the i686 iso from scratch, because upstream changed from build.sh to putting everything into mkarchiso. Now, everything is steered from a profile file.
So either, we find a way to make a profile for multiple architectures, or we need to patch mkarchiso to do that for us - and maybe upstream these changes.
|
|
141 | Devops | Bug Report | Medium | Low | make iso build more reliably | New | |
Task Description
Currently, the iso build are several bash scripts on several machines requiring to move stuff via sshfs and alike.
This should become more stable - ideally some single script/package/systemd-unit with proper error reporting (email or irc come to my mind)
|