|
336 | Packages | Bug Report | Very Low | Low | [pyqt-builder]: needs rebuild | Unconfirmed | |
Task Description
just wanted to get this one on the board - i am unable to build ‘python-pyqt5’ which many other packages depend on, such as ‘qutebrowser’
the current ‘python-pyqt5’ PKGBUILD, which builds fine for x86_64 and arm, has unspecified dependencies in the i686 repos - not sure why that is
ModuleNotFoundError: No module named ‘jaraco.functools’
ModuleNotFoundError: No module named ‘jaraco.context’
that is easily fixed by requiring them explicitly: > makedepends_i686=(’python-jaraco.context’ ‘python-jaraco.functools’)
however, after that, it gives a more fatal error:
sip-build: Unable to import ‘project.py’: No module named ‘pyqtbuild’
that module is in the ‘pyqt-builder’ package, i beleive - ‘pyqt-builder’ is installed as a build dependency; but it was built for python 3.9 - so probably that is why the build could not find the module
|
|
275 | Packages | Bug Report | Medium | Low | [protobuf] breaks heavily on 32-bit | New | |
Task Description
/build/protobuf/src/protobuf-21.2/src/google/protobuf/repeated_field.h: In instantiation of ‘constexpr int google::protobuf::internal::RepeatedFieldLowerClampLimit() [with T = long long int; int kRepHeaderSize = 4]’:
/data/work/arch32/protobuf/src/protobuf-21.2/src/google/protobuf/repeated_field.h:81:27: note: the comparison reduces to ‘(8 ⇐ 4)’
|
|
326 | Packages | Bug Report | Medium | Low | [php] needs a rebuild | New | |
Task Description
httpd/conf/httpd.conf: Cannot load modules/libphp.so into server: libssl.so.1.1>
|
|
257 | Packages | Bug Report | Medium | Low | [openjdk 11/17/18] fails to build almost in all version... | New | |
Task Description
no task description |
|
245 | Packages | Bug Report | Medium | Low | [opencv] Python stack smashing | New | |
Task Description
– Found PythonInterp: /usr/bin/python3 (found suitable version “3.10.4”, minimum required is “3.2”) – Found PythonLibs: /lib/libpython3.10.so (found suitable exact version “3.10.4”) * stack smashing detected *: terminated
Building falls through, only in package() we see the errors then:
rm: cannot remove ‘/build/opencv/pkg/opencv/usr/lib/python3*’: No such file or directory =⇒ ERROR: A failure occurred in package_opencv().
Happens on real i486, not in staging-i486-build, making it even more annoying.
This blocks gstreamer with the opencv plugin..
|
|
280 | Packages | Bug Report | Medium | Low | [mesa] and [mesa-amber] fail on DRI-2 on i486 | New | |
Task Description
Most likely DRI-2 has been removed, rendering a whole bunch of old cards useless.
|
|
344 | Packages | Bug Report | Very Low | Medium | [linux] No kernel updates | Unconfirmed | |
Task Description
The linux kernel seems to be stuck at version 6.1.12.arch1-1.0. The build log of the latest stable kernel (linux-6.6.4.arch1-1.0) shows the following error:
=⇒ ERROR: Integrity checks (sha256) differ in size from the source array. erich@rechenknecht
|
|
243 | Packages | Bug Report | Very Low | Medium | [linux and linux-zen] 5.16.12 needs a rebuild with gcc... | New | |
Task Description
[linux and linux-zen] 5.16.12 needs a rebuild with gcc 11.2 so DKMS packages will work
get errors when dkms installing in make log
cc1: error: incompatible gcc/plugin versions cc1: error: failed to initialize plugin ./scripts/gcc-plugins/structleak_plugin.so
|
|
338 | Packages | Bug Report | Very Low | Low | [libreoffice-still]: error while loading shared librari... | Unconfirmed | |
Task Description
needs rebuild against latest ‘boost’
$ sudo pacman -Sy libreoffice-still
$ pacman -Qs libreoffice-still
local/libreoffice-still 7.3.7-2.0
LibreOffice maintenance branch
$ lowriter
javaldx: Could not find a Java Runtime Environment!
Warning: failed to read path from javaldx
/usr/lib/libreoffice/program/soffice.bin: error while loading shared libraries: libboost_locale.so.1.80.0: cannot open shared object file: No such file or directory
|
|
254 | Packages | Bug Report | Medium | Low | [libinput/libadwaita/gtk4/tracker3] on i486 fail | New | |
Task Description
/usr/bin/ld: warning: libicuuc.so.69, needed by /usr/lib/libtracker-sparql-3.0.so, not found (try using -rpath or -rpath-link)
/usr/bin/ld: warning: libicui18n.so.69, needed by /usr/lib/libtracker-sparql-3.0.so, not found (try using -rpath or -rpath-link)
/usr/bin/ld: /usr/lib/libtracker-sparql-3.0.so: undefined reference to `unorm2_getNFKCInstance_69'
/usr/bin/ld: /usr/lib/libtracker-sparql-3.0.so: undefined reference to `u_strToLower_69'
/usr/bin/ld: /usr/lib/libtracker-sparql-3.0.so: undefined reference to `ubrk_first_69'
tracker3 is not rebuilding on i486:
tracker/docs/reference/libtracker-sparql/meson.build:78:7: ERROR: Unknown variable "tracker_sparql_gir".
|
|
231 | Packages | Bug Report | Medium | Low | [libffi] packages needing a rebuild | New | |
Task Description
'pypy_plugin.so' -> '/build/uwsgi/pkg/uwsgi-plugin-pypy/usr/lib/uwsgi/pypy_plugin.so'
install: creating directory '/build/uwsgi/pkg/uwsgi-plugin-pypy/opt'
install: creating directory '/build/uwsgi/pkg/uwsgi-plugin-pypy/opt/pypy'
install: creating directory '/build/uwsgi/pkg/uwsgi-plugin-pypy/opt/pypy/site-packages'
'uwsgidecorators.py' -> '/build/uwsgi/pkg/uwsgi-plugin-pypy/opt/pypy/site-packages/uwsgidecorators.py'
pypy: error while loading shared libraries: libffi.so.6: cannot open shared object file: No such file or directory
|
|
339 | Packages | Bug Report | Very Low | Low | [libcanberra-pulse]: can not be installed | Unconfirmed | |
Task Description
# pacman -S libcanberra-pulse
resolving dependencies...
warning: cannot resolve "libcanberra=0.30+2+gc0620e4-3.2", a dependency of "libcanberra-pulse"
:: The following package cannot be upgraded due to unresolvable dependencies:
libcanberra-pulse
:: Do you want to skip the above package for this upgrade? [y/N]
error: failed to prepare transaction (could not satisfy dependencies)
:: unable to satisfy dependency 'libcanberra=0.30+2+gc0620e4-3.2' required by libcanberra-pulse
|
|
319 | Packages | Bug Report | Medium | Low | [js102] rebuild results in a broken JS interpreter outp... | New | |
Task Description
2:33.16 1 warning generated.
2:47.25 Finished release [optimized] target(s) in 2m 24s
3:50.23 js/src/build/libjs_static.a
3:50.23 js/src/build/libmozjs-102.so
3:51.27 js/src/gdb/gdb-tests
3:51.27 js/src/shell/js
3:51.33 js/src/jsapi-tests/jsapi-tests
3:52.83 ./spidermonkey_checks.stub
3:54.52 TEST-PASS | check_spidermonkey_style.py | ok
3:54.79 TEST-PASS | check_macroassembler_style.py | ok
3:54.84 TEST-PASS | check_js_opcode.py | ok
3:55.04 7 compiler warnings present.
3:55.09 Overall system resources - Wall time: 233s; CPU: 0%; Read bytes: 0; Write bytes: 0; Read time: 0; Write time: 0
3:55.13 warning: intl/icu/source/i18n/nfsubs.cpp:1313:17 [-Wunused-but-set-variable] variable 'pow' set but not used
3:55.13 warning: intl/icu/source/i18n/ucol.cpp:108:12 [-Wdeprecated-declarations] 'ucol_safeClone_71' is deprecated
3:55.13 warning: mfbt/tests/TestResult.cpp:101:20 [-Wdeprecated-declarations] 'is_literal_type_v<mozilla::Result<int *, Failed>>' is deprecated
3:55.13 warning: mfbt/tests/TestResult.cpp:102:20 [-Wdeprecated-declarations] 'is_literal_type_v<mozilla::Result<mozilla::Ok, Failed>>' is deprecated
3:55.13 warning: mfbt/tests/TestResult.cpp:103:20 [-Wdeprecated-declarations] 'is_literal_type_v<mozilla::Result<mozilla::Ok, Foo8>>' is deprecated
3:55.13 warning: mfbt/tests/TestResult.cpp:104:20 [-Wdeprecated-declarations] 'is_literal_type_v<mozilla::Result<Foo8, Foo16>>' is deprecated
3:55.13 warning: mfbt/tests/TestResult.cpp:105:21 [-Wdeprecated-declarations] 'is_literal_type_v<mozilla::Result<mozilla::Ok, mozilla::UniquePtr<int>>>' is deprecated
3:55.13 Your build was successful!
Config object not found by mach.
Configure complete!
Be sure to run |mach build| to pick up any changes
To view resource usage of the build, run |mach resource-usage|.
To take your build for a test drive, run: |mach run|
Profiling instrumented JS...
/startdir/PKGBUILD: line 154: 6398 Segmentation fault (core dumped) "$js" run.js
|
|
283 | Packages | Bug Report | Very Low | Low | [icu70/icu71 ] packages not rebuilt yet | Assigned | |
Task Description
starting to collect them here packages which require icu69 (and have thus not been rebuilt for icu 71 yet):
libreoffice-fresh
|
|
228 | Packages | Bug Report | Medium | Low | [icu69] not updated packages | New | |
Task Description
starting to collect them here packages which require icu69 (and have thus not been rebuilt for icu 70 yet):
- abiword: libical (rescheduled build)
|
|
313 | Packages | Bug Report | Medium | Low | [hg] broken on i486 | New | |
Task Description
Traceback (most recent call last):
File "/usr/bin/hg", line 59, in <module>
dispatch.run()
File "/usr/lib/python3.10/site-packages/mercurial/dispatch.py", line 143, in run
status = dispatch(req)
File "/usr/lib/python3.10/site-packages/mercurial/dispatch.py", line 232, in dispatch
status = _rundispatch(req)
File "/usr/lib/python3.10/site-packages/mercurial/dispatch.py", line 276, in _rundispatch
ret = _runcatch(req) or 0
File "/usr/lib/python3.10/site-packages/mercurial/dispatch.py", line 451, in _runcatch
return _callcatch(ui, _runcatchfunc)
File "/usr/lib/python3.10/site-packages/mercurial/dispatch.py", line 461, in _callcatch
return scmutil.callcatch(ui, func)
File "/usr/lib/python3.10/site-packages/mercurial/scmutil.py", line 153, in callcatch
return func()
File "/usr/lib/python3.10/site-packages/mercurial/dispatch.py", line 441, in _runcatchfunc
return _dispatch(req)
That’s why ‘nss’ is not rebuilding on i486.
|
|
321 | Packages | Bug Report | Medium | Low | [gnome] broken | Assigned | |
Task Description
mutter had a checksum issue (trivial).
gnome-shell misses a current version of gjs:
Dependency gjs-1.0 found: NO found 1.70.2 but need: '>= 1.73.1'
Did not find CMake 'cmake'
Found CMake: NO
Run-time dependency gjs-1.0 found: NO
gnome-shell/meson.build:80:0: ERROR: Dependency lookup for gjs-1.0 with method 'pkgconfig' failed: Invalid version, need 'gjs-1.0' ['>= 1.73.1'] found '1.70.2'.
A full log can be found at /build/gnome-shell/src/build/meson-logs/meson-log.txt
|
|
82 | Packages: Stable | Bug Report | Medium | Low | [glibc] ld warning: /usr/lib32/ld-linux.so.2: corrupt G... | New | |
Task Description
Attached to Project: Archlinux32 Opened by Jeff Hodd - 11.07.2019 Last edited by Andreas Baumann - 09.08.2019 FS#82 - [glibc] ld warning: /usr/lib32/ld-linux.so.2: corrupt GNU_PROPERTY_TYPE (5) size: 0
All software builds are producing this warning. Some builds are failing because of the error return on linking. I’m also seeing failures on LD_PRELOADs.
/bin/ld: warning: /usr/lib/ld-linux.so.2: corrupt GNU_PROPERTY_TYPE (5) size: 0
Easy to reproduce. Just build this program:
# test.c # Compiled with ‘gcc test.c’ int main() {
return 0;
}
This was reported at bugs.archlinux.org (reference https://bugs.archlinux.org/task/63015) where it was closed and considered fixed if built using the –enable-cet flag. I built glibc with the –enable-cet flag, but am still seeing the failures, so not fixed. Closed by Andreas Baumann 09.08.2019 11:44 Reason for closing: Fixed
Comments (6)
Related Tasks (0/0)
Jeff Hodd commented on 16.07.2019 03:29
I’ve narrowed down the glibc upgrade to glibc-2.29-1.26 -> glibc-2.29-1.27. The error doesn’t occur with glibc-2.29-1.26. There were 3 changes made to the arch32 PKGBUILD for the glibc-2.29-1.27 release. One of them caused this issue. Admin Andreas Baumann commented on 16.07.2019 05:33
There is another thing which can change: the toolchain. This GNU_PROPERTY error is something the compiler emits (we think it’s CET stuff, but it’s badly documented). Binutils ld seems not to like this ELF section.
The error is the same as in:
https://bugs.archlinux.org/task/63015
What’s puzzling me: –enable-cet is there in glibc, gcc, binutils (just not for i486, as CET doesn’t\ work for older CPUs).
Commit: 09d03cbd4c57b8eabfadd22b67929d958b2409d7 and d57a456faa674c24e8869a26a14c497c95accf1f in glibc are mine, they try to change stack alignment and handling of SSE for pentium4 for Java, also without effect. Admin Andreas Baumann commented on 16.07.2019 05:35
About linker warnings being turned to errors (as for compiler warnings turned to errors): this is something the DEVELOPER should do, NOT the PACKAGER. Released software should: - NOT include asserts - NOT include debug code - NOT include code only used for running tests - NOT use -Werror - NOT use -Wl,–fatal-warnings
See for instance extra-cmake-modules-5.59.0-ld-no-fatal-warning.patch. Jeff Hodd commented on 16.07.2019 21:50
I knew about the cet issue. Did quite abit of looking around to get some insight into it (even looked at the code - elf-properties.c - and it looks like the Elf_Internal_Note description size is coming back with a value of 0. the other possibility is that (size % 4) is something other than 0 which is less likely). From what i could gather, cet is supposed to be enabled in the latest builds of glibc for i686 even though, as you pointed out, it’s not well documented. I did do a 2.29-4 i686 build with cet enabled and it made no difference vis-a-vis the warning. I also checked the upstream diff between 2.29-1.26 and 2.29-1.27 and noticed the addition of –enable-static-pie and thought maybe position independent executables may explain it. Did another glibc build with static pie disabled and that made no difference. Am about to go back and check the diff again and see what else may have changed.
I did check the CMakeLists.txt file for my failing build and it uses -Werror and -Wl,–fatal-warnings so I will remove those. But that doesn;t actually fix the underlying issue of the warning which we shouldn;t be seeing.
It is up to the developer, but too often one has to show that a change fixes an issue before you’ll get any attention. I may not be THE developer for this particular package, but I am A developer (in general), so I don;t feel uncomfortable making code changes.
I’ll keep looking around for differences between the 1.26 and 1.27 builds. Jeff Hodd commented on 16.07.2019 22:15
if (note->descsz < 8 || (note->descsz % align_size) != 0)
{
bad_size:
_bfd_error_handler
(_("warning: %pB: corrupt GNU_PROPERTY_TYPE (%ld) size: %#lx"),
abfd, note->type, note->descsz);
return FALSE;
}
The warning is printing out the description size - and that’s 0.
Apparently it’s supposed to be >= 8 and divisible by 4:
unsigned int align_size = bed->s->elfclass == ELFCLASS64 ? 8 : 4;
I am assuming that arch32 doesn’t support ELFCLASS64. Jeff Hodd commented on 22.07.2019 17:13
https://bbs.archlinux32.org/viewtopic.php?id=2770
Google Cache
|
|
345 | Packages | Bug Report | Very Low | Low | [gcompris-qt] doesn't start due to Qt 5.15.10 | Unconfirmed | |
Task Description
I fails to start with: “Cannot mix incompatible Qt library (5.15.9) with this library (5.15.10)”
|
|
311 | Packages | Bug Report | Medium | Low | [ffmpeg] fails with SIGILL on i686 | Assigned | |
Task Description
work fine on pentium4
reproducable: ffplay <file.mp4>
offending opcode:
0xb5f315e7: f3 0f 10 83 d0 0b 00 00 movss
0xbd0(%ebx),%xmm0
|
|
252 | Packages | Bug Report | Medium | Low | [dbus-python/python-dbus] mixup | New | |
Task Description
packages (like upower) which include a dependency on python-dbus use a 3.9 version and miss the correct one dbus-python (which replaces python-dbus). This will only solve itself when upstream adapts the PKGBUILDs to this name change.
|
|
340 | Packages | Bug Report | Very Low | Critical | [chromium] broken due to outdated libraries, plus also ... | Unconfirmed | |
Task Description
The package needs to be recompiled for re2 v10 and several required dependencies were not installed, such as icu69 (?) and more.
|
|
320 | Packages | Bug Report | Medium | Low | [btop] On i486 fails on clock_gettime64 | New | |
Task Description
shows a red ERROR: on startup, strace shows:
write(2, "\n", 1
) = 1
clock_gettime64(CLOCK_REALTIME, {tv_sec=1675495215, tv_nsec=436798535}) = 0
exit_group(1) = ?
+++ exited with 1 +++
[root@eurobuild6-7-i486 ~]# btop
ERROR: No UTF-8 locale detected!
|
|
246 | Packages | Bug Report | Medium | Low | [blender] doesn't work (and doesn't build) | New | |
Task Description
blender 2.93 has dependencies on wrong versions of - llvm (via openshadinglanguage) - boost (via openimageio)
Could NOT find PythonLibsUnix (missing: PYTHON_LIBRARY PYTHON_LIBPATH PYTHON_INCLUDE_DIR PYTHON_INCLUDE_CONFIG_DIR)’
blender 3.0.1: Haru not found, disabling WITH_HARU’ and ‘Cycles OSL requires WITH_LLVM, the library may not have been found. Configure LLVM or disable WITH_CYCLES_OSL
Let’s tackle one issue after the other.
|
|
287 | Packages | Feature Request | Very Low | Low | chromium not able to build | Assigned | |
Task Description
Wait unfortunately i found a patch through which chromium would compile on x86
please try to build chromium using those patches
https://github.com/void-linux/void-packages/blob/master/srcpkgs/chromium/patches/reenable-linux-i686-builds.patch https://github.com/void-linux/void-packages/blob/master/srcpkgs/chromium/patches/chromium-i686-vaapi-fpermissive.patch https://github.com/void-linux/void-packages/blob/master/srcpkgs/chromium/patches/chromium-105-bitmap-include.patch https://github.com/void-linux/void-packages/blob/master/srcpkgs/chromium/patches/chromium-105-browser-include.patch
|
|
176 | Devops | Feature Request | Medium | Low | bring back archiso32 dual boot | New | |
Task Description
We should make archiso32 be able to build a i686- and x86_64-bootable iso, again. This is really handy on a usb stick as a rescue system.
The problem with the old dual iso is, that I had to do the i686 iso from scratch, because upstream changed from build.sh to putting everything into mkarchiso. Now, everything is steered from a profile file.
So either, we find a way to make a profile for multiple architectures, or we need to patch mkarchiso to do that for us - and maybe upstream these changes.
|